Tekin RS ESC sensored
#7591
is zero delay available with vegas v200?
I use v199 with zero delay is there any difference between v199 and v200 &vegas
thanx in advance
I use v199 with zero delay is there any difference between v199 and v200 &vegas
thanx in advance
#7592
Just downloaded the vegas 200 version from TQ racing site. All I can say is thanks Randy, glad I bought the Tekin(s).
http://www.tqcells.com/Hotwire200.zip
Link is courtousy of TQ Steve.
http://www.tqcells.com/Hotwire200.zip
Link is courtousy of TQ Steve.
#7593
Tech Master
You don't have to update your speedo.
Just install the software and change the Turbo delay.
Just install the software and change the Turbo delay.
#7594
Tech Adept
You have to check the sensored box to get the turbo feature. If you are in dual mode, then it wont show up. if you do that and you get a slider to adjust your turbo then you didnt uninstall all the files and need to go back and do that first before installing.
#7595
Duh! That is what it was, thanks for the help!
#7596
The Vegas software will allow down to .2 seconds, not 0.
There was only one version that allowed 0 delay and it had radio calibration issues and was short lived because of it. Anyone using this version should go up to the Vegas software. .2 of a second is a heartbeat...
There was only one version that allowed 0 delay and it had radio calibration issues and was short lived because of it. Anyone using this version should go up to the Vegas software. .2 of a second is a heartbeat...
#7597
Tech Master
I tested it by holding the car up.
The Turbo kicks in a lot faster.
I lowered my Boost now and set my turbo delay on 0,2sec.
Boost is now 4 because the motor is on 12.
See what this will do.
It sounds good.
The Turbo kicks in a lot faster.
I lowered my Boost now and set my turbo delay on 0,2sec.
Boost is now 4 because the motor is on 12.
See what this will do.
It sounds good.
#7598
Tech Master
iTrader: (6)
Also when you said "Boost is now 4". What boost was it?
Often time when people says "Boost" I got confused, not sure what people meant "Timing Boost" or "Turbo Boost".
Maybe the next version Tekin should come up with other function name so dumb dumb like me can distinguished between the two.
Until today I still not quite understand how these Timing Boost and Turbo boost mean.
But let me see if I get this right.
If I set my actual motor timing to 10, Timing Boost to 20 and Turbo Boost to 10. Is this mean when I hit a full throttle my motor will actually running at 30 degrees timing then .5 sec later when Turbo Boost kicked in I will be running my motor in the total of 40 degrees timing??
#7599
The Vegas software will allow down to .2 seconds, not 0.
There was only one version that allowed 0 delay and it had radio calibration issues and was short lived because of it. Anyone using this version should go up to the Vegas software. .2 of a second is a heartbeat...
There was only one version that allowed 0 delay and it had radio calibration issues and was short lived because of it. Anyone using this version should go up to the Vegas software. .2 of a second is a heartbeat...
Is that Calibration issue occurs @ the First one off Calibration after loading new software or a continuos problem?
I used 0 delay last meeting it was Great with no issues
I prefer 0 delay because our club Track is really small ...
How about difference between v199 and v200?
As far as I know v199 is the test version of v200 and they should be same ...
is that True?
Cheers
Last edited by yokemad; 10-15-2009 at 04:32 PM.
#7600
Tech Elite
iTrader: (3)
When you said "lowred boost". what boost was it?
Also when you said "Boost is now 4". What boost was it?
Often time when people says "Boost" I got confused, not sure what people meant "Timing Boost" or "Turbo Boost".
Maybe the next version Tekin should come up with other function name so dumb dumb like me can distinguished between the two.
Until today I still not quite understand how these Timing Boost and Turbo boost mean.
But let me see if I get this right.
If I set my actual motor timing to 10, Timing Boost to 20 and Turbo Boost to 10. Is this mean when I hit a full throttle my motor will actually running at 30 degrees timing then .5 sec later when Turbo Boost kicked in I will be running my motor in the total of 40 degrees timing??
Also when you said "Boost is now 4". What boost was it?
Often time when people says "Boost" I got confused, not sure what people meant "Timing Boost" or "Turbo Boost".
Maybe the next version Tekin should come up with other function name so dumb dumb like me can distinguished between the two.
Until today I still not quite understand how these Timing Boost and Turbo boost mean.
But let me see if I get this right.
If I set my actual motor timing to 10, Timing Boost to 20 and Turbo Boost to 10. Is this mean when I hit a full throttle my motor will actually running at 30 degrees timing then .5 sec later when Turbo Boost kicked in I will be running my motor in the total of 40 degrees timing??
#7601
#7602
Tech Elite
iTrader: (3)
Please post a screen shot of your "0 delay" software for me: [email protected]
#7603
@Randy
You've got PM
You've got PM
#7605
Tech Master
iTrader: (10)
I hate be the guy that rains on the parade, but I feel a need to clear something that's been bothering me. I realize that with the advent of the new turbo feature of v200 (which I have) that a whole new aspect of tuning is available, but I feel that putting a delay at .2 isn't gonna help win the race. I have had many close races in a competitive track and never once did it occur to me that I needed a .3 second faster turbo. It seems absurd. It does occur to me that I could adjust my camber or gearing, these are the things that give that extra edge. The new turbo feature is turning into the new crutch. I'm waiting to see who's gonna ask what the delay should be with a 50c battery. A .3 quicker delay isn't gonna get you a podium finish, one less bobble might. We may eventually get that feature into the general public, but guess what? The fast guys are always gonna be faster because of set-up and smooth driving. I'm now getting off of the soap box. Let it rain--Al