Tekin RS ESC sensored
02-23-2010, 12:29 PM
Sorry if this has been asked before, but I have looked at the Tekin web site and I do not see the information.
I run 13.5 and 17.5, NO mod, so which is the better unit the RS Pro or RS unit for running 13.5 and 17.5 (the lowest I would ever go to is 10.5)
I'm sure that this is a preference but if not running in the A mains or even B mains at a big event, I would like to know which is the right unit to purchase.
Thanks in advance.
I run 13.5 and 17.5, NO mod, so which is the better unit the RS Pro or RS unit for running 13.5 and 17.5 (the lowest I would ever go to is 10.5)
I'm sure that this is a preference but if not running in the A mains or even B mains at a big event, I would like to know which is the right unit to purchase.
Thanks in advance.
Tekin RS (not PRO) is all you need...and you don't need to run MOD motor cause with the V203 software, your 13.5 will be a MOD motor for outdoor (like HTSC or even LHR).
Even if TEKIN has a crackberry edition for the Hotwire...can you really READ anything on the crackberry? I think you might need to update the firmware of your eye first...LOL
Netbook is about $250...more then enough to run the software, and browse internet, watch live streaming movie, while wrenching cars...it is a MUST have beisde the Tekin RS/Hotwire/V203.
Welcome to the 2010 RC technology racing....
02-23-2010, 03:03 PM
Hey!
I have looked into Tekin and wonder, wich Tekin is the best for 13,5 stock class and modified? I will run both and want the best out of it.
What i can read, do i need to have a computer to setup the ESC? if so, how?
Thanks! // www.andrefossto.wordpress.com
I have looked into Tekin and wonder, wich Tekin is the best for 13,5 stock class and modified? I will run both and want the best out of it.
What i can read, do i need to have a computer to setup the ESC? if so, how?
Thanks! // www.andrefossto.wordpress.com
02-23-2010, 03:17 PM
Start 5400 - end 14000
Profile 3
Timing 40
Turbo 10
ramp 2.0
delay 0.5
The gearing was around 7.3 on a fast layout 30*16m track
02-23-2010, 04:24 PM
Tech Initiate
02-23-2010, 05:09 PM
i don't know about your tracks, but at mine, we have more computing power than NASA. you probably won't need a laptop or hotwire.. find a buddy and flip him a few bucks or buy him a hot dog in appreciation for laptop/hotwire time.. seriously we had no less than 2 dozen comps all running hotwire at our last race.....
02-23-2010, 05:18 PM
Wow...Barry is back.
Tekin RS (not PRO) is all you need...and you don't need to run MOD motor cause with the V203 software, your 13.5 will be a MOD motor for outdoor (like HTSC or even LHR).
Even if TEKIN has a crackberry edition for the Hotwire...can you really READ anything on the crackberry? I think you might need to update the firmware of your eye first...LOL
Netbook is about $250...more then enough to run the software, and browse internet, watch live streaming movie, while wrenching cars...it is a MUST have beisde the Tekin RS/Hotwire/V203.
Welcome to the 2010 RC technology racing....
Tekin RS (not PRO) is all you need...and you don't need to run MOD motor cause with the V203 software, your 13.5 will be a MOD motor for outdoor (like HTSC or even LHR).
Even if TEKIN has a crackberry edition for the Hotwire...can you really READ anything on the crackberry? I think you might need to update the firmware of your eye first...LOL
Netbook is about $250...more then enough to run the software, and browse internet, watch live streaming movie, while wrenching cars...it is a MUST have beisde the Tekin RS/Hotwire/V203.
Welcome to the 2010 RC technology racing....
Thanks for the idea with a netbook, I did not think of that... i have a spare (or two) notebooks, I just thought a connection to a smart phone would be really cool. I was basing my question on the setup sheet, so I did not a big need for a lot of info on the screen, just select 1 to 6 and enter a few numbers ...
By the time the snow melts off, I will be hitting the track... I have been taking 30 credit hours per term (8 weeks) so it has been really crazy...
Let me know what is happening in the area... I would not mind hitting the carpet.... but Elk Grove is not open at this time... Hopping.....
02-23-2010, 05:20 PM
First, I can't believe it, a Bvoltz sighting!!! Nice to know that you are still hanging with the r/c thing.
To answer your question, it doesn't matter whether you go with the RS or RS Pro. The main difference between the two is that the Pro gives you an extra FET board to run motors down to 2.5 whereas the RS (not Pro) can only run motors down to 5.5. All the programming is the same between the two, just limited vs unlimited motor choices is the main difference. So, if you are not going to run below 5.5, save yourself the dollars and get the RS.
To answer your question, it doesn't matter whether you go with the RS or RS Pro. The main difference between the two is that the Pro gives you an extra FET board to run motors down to 2.5 whereas the RS (not Pro) can only run motors down to 5.5. All the programming is the same between the two, just limited vs unlimited motor choices is the main difference. So, if you are not going to run below 5.5, save yourself the dollars and get the RS.
But we have MADE the turn.... It is time to get setup for the racing season....
02-23-2010, 05:31 PM
Wow...Barry is back.
Tekin RS (not PRO) is all you need...and you don't need to run MOD motor cause with the V203 software, your 13.5 will be a MOD motor for outdoor (like HTSC or even LHR).
Even if TEKIN has a crackberry edition for the Hotwire...can you really READ anything on the crackberry? I think you might need to update the firmware of your eye first...LOL
Netbook is about $250...more then enough to run the software, and browse internet, watch live streaming movie, while wrenching cars...it is a MUST have beisde the Tekin RS/Hotwire/V203.
Welcome to the 2010 RC technology racing....
Tekin RS (not PRO) is all you need...and you don't need to run MOD motor cause with the V203 software, your 13.5 will be a MOD motor for outdoor (like HTSC or even LHR).
Even if TEKIN has a crackberry edition for the Hotwire...can you really READ anything on the crackberry? I think you might need to update the firmware of your eye first...LOL
Netbook is about $250...more then enough to run the software, and browse internet, watch live streaming movie, while wrenching cars...it is a MUST have beisde the Tekin RS/Hotwire/V203.
Welcome to the 2010 RC technology racing....
02-23-2010, 06:11 PM
confused
Hey guys i was wondering how many software versions are there for the RS i know theres v.203 which is awesome but what else Ive heard 2.0 and vegas 2.0 so confused i am stuck in a class which is just like having a "restrictor plate like nascar lol" any input or answers are appreciated...
02-23-2010, 07:29 PM
Tech Addict
Barry, just get the #%!@ thing and come on back down to play on the carpet with us. Hurry. You might even get to see Leighton running a 12th scale around the track.
Even I had to get one to go in a WGT.
Ed M.
Even I had to get one to go in a WGT.
Ed M.
02-23-2010, 07:43 PM
i don't know about your tracks, but at mine, we have more computing power than NASA. you probably won't need a laptop or hotwire.. find a buddy and flip him a few bucks or buy him a hot dog in appreciation for laptop/hotwire time.. seriously we had no less than 2 dozen comps all running hotwire at our last race.....
02-23-2010, 08:13 PM
Hey guys i was wondering how many software versions are there for the RS i know theres v.203 which is awesome but what else Ive heard 2.0 and vegas 2.0 so confused i am stuck in a class which is just like having a "restrictor plate like nascar lol" any input or answers are appreciated...
02-23-2010, 08:31 PM
I would love to get back down there... I have taken a break from running during this time, but my heart has not....
02-23-2010, 08:43 PM
02-23-2010, 08:45 PM
