20 SMOKE

iTrader: (103)

its on the home page

or8ital

iTrader: (38)

I have a Novak in now.

tallyrc

iTrader: (12)

worked for me, now i just need some serious setup help.. there is a button for user profiles, but none share the new software..

tallyrc

iTrader: (12)

also, some of us have multiple machines.. would be nice to not have to register for them all..

bkspeedo

iTrader: (5)

To any team driver that's used 203 can you please post your setup for 13.5BL or give an idea how the new controls work in conjunction with each other.

So far I have not been able to find a help file that explains the new controls.

Thanks

or8ital

iTrader: (38)

I didn't have to register my machine.

Ron Goetter

iTrader: (17)

I haven't run it with a Novak yet. But with a duo 1 in middle hole. I started at 5.18 FDR with 50 boost, max turbo, 2 turbo ramp, .3 deley, end rpm at 8000, start rpm around 1500, with a fan. My motor was coming off at 120* and was very fast. By the end of the day I had maxed the boost and was still playing with the start and end rpm. but still the motor was only coming off at 130*.

If you put this in your car be sure to temp your motor after the first 2 minutes of running or sooner if it gets soft on ya'....

or8ital

iTrader: (38)

Cool, thanks. How do you set the start and end RPMs? Mine defaults to 4574 as the end RPM and I get 5 or 6 selections for the start the closest being 1327.

Ron Goetter

iTrader: (17)

you type in the end rpm you want and hit the Calculate button the shows up under the rpm you typed in. Then you can select start rpm from the drop down menu that shows up.

or8ital

iTrader: (38)

I think I figured it out. I changed it to 8000 and then clicked Calc RPMs.

or8ital

iTrader: (38)

Holy crap. I just tried those settings on my bench and the noise generated by the power is frightening.

FLAT OUT

Ok I only bought my Rs Pro a week ago and loaded the Vegas 200 on it, Ive not been able to run my new esc yet and know there is new software DOH !! lol
My question is as im a bit thick how do I load the new 2.03 software, do I need to completly delete the v200 software off my lap top ?? also can i keep both the 2.00 and the new 2.03 on the speedo and try both to see what the difference is
thanks guys

Ron Goetter

iTrader: (17)

yes its very scary when free wheeling. I popped a rubber tire of the bead doing it.

ian plimmer

i must be the biggest idiot on here cos i carnt find any link that takes me to a registration process, i just see the old software H E L P !!!!!!!

Danny-b23

iTrader: (3)

http://www.teamtekin.com/hotwire/vegas/index.html