Go Back  R/C Tech Forums > General Forums > Electric On-Road
23T motor thread >

23T motor thread

23T motor thread

Old 11-12-2003, 03:08 AM
  #376  
Tech Master
iTrader: (53)
 
alana07's Avatar
 
Join Date: Oct 2001
Location: There
Posts: 1,877
Trader Rating: 53 (100%+)
Default Re: Re: Re: Re: 23t in a 1/12

Originally posted by JDM_DOHC_SiR
What do you do your roll outs in metric or standard..?? I have figured it out in metric for 46~44mm rear tires right now .. a few more hours and I should have it all worked out pretty good...I hop you have some small spurs 92~96T 64P

-=Dave
i cant really remember the rear tires' diameter, its the kit tires from a corally g3. but i've asked around my friends who uses 23t with 6 cells in their 1/12, most recommend a ratio of around 4. hopes this helps you out. right now i'm using 48dp spurs in the range of 71t-75t.
alana07 is online now  
Old 11-12-2003, 06:17 AM
  #377  
Tech Adept
 
alch's Avatar
 
Join Date: Nov 2003
Location: Tokyo, Japan
Posts: 188
Default

Originally posted by JDM_DOHC_SiR
No No Atals makes some bushing lube thats in the Blue bottle ... Also ECHO makes some nice Comm drops( TQ Drops )
-Dave
I see says the blind man!
I got some atlas metal grease for the bushings. Will pick up some TQ drops...

Cheers

Alch
alch is offline  
Old 11-12-2003, 06:11 PM
  #378  
Tech Master
iTrader: (53)
 
alana07's Avatar
 
Join Date: Oct 2001
Location: There
Posts: 1,877
Trader Rating: 53 (100%+)
Default Re: Re: Re: Re: 23t in a 1/12

Originally posted by JDM_DOHC_SiR
What do you do your roll outs in metric or standard..?? I have figured it out in metric for 46~44mm rear tires right now .. a few more hours and I should have it all worked out pretty good...I hop you have some small spurs 92~96T 64P

-=Dave
ok dave, i've measured the rear tires' diameter, they're 52mm.
alana07 is online now  
Old 11-13-2003, 12:20 AM
  #379  
fai
Regional Moderator
 
fai's Avatar
 
Join Date: Aug 2001
Location: Hong Kong
Posts: 765
Default

Dave, any tips of setting up Echo PQ? Mine is now approx. 6A with 27000rpm at 7.2V from my MMS... Still a large difference from yours...
Thanks! BTW, I put Atlas sprinter brush on it!
fai is offline  
Old 11-16-2003, 06:59 PM
  #380  
Tech Master
iTrader: (53)
 
alana07's Avatar
 
Join Date: Oct 2001
Location: There
Posts: 1,877
Trader Rating: 53 (100%+)
Default Re: Re: Re: Re: 23t in a 1/12

Originally posted by JDM_DOHC_SiR
What do you do your roll outs in metric or standard..?? I have figured it out in metric for 46~44mm rear tires right now .. a few more hours and I should have it all worked out pretty good...I hop you have some small spurs 92~96T 64P

-=Dave
hi dave,
i managed to dabble with my 1/12 yesterday, though its worth 2 packs runtime only. using yok 23T RSL with 48dp 74t spur and 18t pinion and rear tire diameter 52mm using gp3300, geared 4.11. i run both packs till car IS noticeably slower but not till crawling, the motor temp is only slight warm, can put your hands there for more than 5sec no problem. also the batts were only slight warm, looks good so far, the comm looks quite clean too. the car had plenty of mid/high end power, easily catch up with cars on the str8s. but 1 thing i noticed is that at the end of the str8 when i let off throttle the car visibly slowed, sort of automatic brake even though i didnt set any drag brakes on in my esc. is it due to the strong magnets in the 23t motors?
so how's your 1/12 dabbling over the weekend gone?
alana07 is online now  
Old 01-14-2004, 04:03 PM
  #381  
KoE
Tech Master
iTrader: (6)
 
KoE's Avatar
 
Join Date: Aug 2003
Location: Blue Marble
Posts: 1,230
Trader Rating: 6 (100%+)
Default

hope this thread isn't dead and we haven't heard any new reviews from master dave in a long while !!!
KoE is offline  
Old 01-14-2004, 09:28 PM
  #382  
Tech Regular
 
Join Date: Sep 2003
Location: Hong Kong
Posts: 277
Default

Yea, I just got into EP, would very much like to see this thread back again!
So whats a good 23T motor for torque??
lawndoggie is offline  
Old 01-14-2004, 09:45 PM
  #383  
Tech Master
iTrader: (22)
 
xray racer's Avatar
 
Join Date: Jul 2002
Location: sydney, australia
Posts: 1,574
Trader Rating: 22 (100%+)
Default

hey,
is dave jdm_dohc_sir???
newhom, haha

i was wondering what sort of gearing to use with an atlas solid (laydown and standup) and an atlas splash team edition, the black blue and red one.

the tracks we run on are faily flowing, one is particularly fast with a massive straight and only 2 kind of sharpish corners that are still fairly flowing. the straight would be about hmm......50 metres long or so maybe more

the other track has a similar straight with a sweeper, and then a fast flowing chicane section before a 180degree turn onto another straight, then some hairpin chicanes.

both tracks are fairly flowing and dont require any braking at all, mayb alittle let off of the throttle but otherwise its put the power down and try and smoke everyone else,

haha, so after all that, do u have any reccommendations for the atlas solids and the splash, gearing wise?

also, what version of the yokomo motors would go well on these tracks, the lr? or one of the others

thanx in advance

robbie loyd
xray racer is offline  
Old 01-14-2004, 10:08 PM
  #384  
KoE
Tech Master
iTrader: (6)
 
KoE's Avatar
 
Join Date: Aug 2003
Location: Blue Marble
Posts: 1,230
Trader Rating: 6 (100%+)
Default

lawndoggie, u've picked up a momo ...that's ought to be good to ya! i've a couple of xenons and a atlas ... good stuffs torque-wise
KoE is offline  
Old 01-14-2004, 10:37 PM
  #385  
Tech Regular
 
Join Date: Sep 2003
Location: Hong Kong
Posts: 277
Default

Originally posted by KoE
lawndoggie, u've picked up a momo ...that's ought to be good to ya! i've a couple of xenons and a atlas ... good stuffs torque-wise
Oh great!! perhaps you can help me then.
Yes I got the momo, because of JDH's recommendation.
Anyway, I looked at the endbell, and noticed a green look computer chip thingy, is that the motor cap?
I understand that I am suppose to have 3 caps on the motor:
1 positive to can
1 negative to can
1 positive to negative.
So now with that little chip, does it mean I don't have to put any more caps on the motor?
Also do you know the gearing for medium size track for the momo? The LHS told me 5.2-5.4!?
lawndoggie is offline  
Old 01-15-2004, 09:50 AM
  #386  
Tech Initiate
 
Zirex's Avatar
 
Join Date: Dec 2003
Location: somewhere in the planet
Posts: 24
Default

Originally posted by JDM_DOHC_SiR
Mid 5's for the Chrome and lower 6's for the Gun metal
-Dave
So the gun metal RR is less torque than the chrome RR....am i right??
Zirex is offline  
Old 01-17-2004, 06:16 PM
  #387  
KoE
Tech Master
iTrader: (6)
 
KoE's Avatar
 
Join Date: Aug 2003
Location: Blue Marble
Posts: 1,230
Trader Rating: 6 (100%+)
Default

lawndoggie....we really need JDM on this. Dunno about the "green chip" myself..perhaps u r about right. anyway, i doubt extra capacitors will harm the motor.

i've seen stock xenon taking severe abuse thru high gearing and still performed well. I've had mine close to 5 previously but boy it came out cooking ! LOL !!
KoE is offline  
Old 02-09-2004, 10:04 PM
  #388  
DZ
Tech Addict
iTrader: (4)
 
Join Date: Feb 2003
Location: CRAZY 88 - 002
Posts: 594
Trader Rating: 4 (100%+)
Default

HI GUYS,

I HAVE THE YOKOMO LT AND ST WHICH IN BASIC SET UP IS BETTER.

AND WHAT GEARING WOULD YOU USE FOR BOTH

DZ
DZ is offline  
Old 03-05-2004, 11:01 PM
  #389  
Tech Master
iTrader: (22)
 
xray racer's Avatar
 
Join Date: Jul 2002
Location: sydney, australia
Posts: 1,574
Trader Rating: 22 (100%+)
Default

hey everyone,
i was wondering what is the best 23t motor for open flowing tracks, has some kinda tight corners but mainly need the top end......... can anyone help me out?

also, i have an atlas solid (stand up), and atlas solid (laydown), and an atlas splash team edition....... could somebody tell me how to get the most performance out of these motors?

we are allowed to run bearings in this series, so is that a worthy addition to the motor?


please if any one can help me out, let me know asap, as i really wanna squeeze every little bit out of these motors

thanx ,
robbie lloyd
xray racer is offline  
Old 03-06-2004, 04:56 AM
  #390  
KoE
Tech Master
iTrader: (6)
 
KoE's Avatar
 
Join Date: Aug 2003
Location: Blue Marble
Posts: 1,230
Trader Rating: 6 (100%+)
Default

xray racer,

bearings are better over bushings :-) i've tried high silver content brushes with my atlas purple force and loving it. Xenon momo is not a bad 23T too darn.. JDM has been missing too long
KoE is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.