R/C Tech Forums - Team Magic E4 Thread

Hey All, must sell all 3 of my E4FS chassis. $140 each including shipping in the US. Will ship anywhere in the world for $130 + actual shipping cost. Please contact me via PM. Can supply pictures and list of any option parts.
Also have some option / spare parts and shock spring sets to sell but will offer them with the chassis first before separating. Thanks !!!

Slo_E4

08-03-2011 03:26 PM

Trader :sneaky::lol::lol:

Evoracer

08-03-2011 04:13 PM

You mean "traitor" :D Yeah...I know but keeping the club alive is a major goal. I was able to get a discount arrangement for another brand of product and I need to support that. Simply can't afford to have all the toys I used to so some have to go. The E4 is still one of the best platforms out there and I can't wait to see the updated chassis when it comes out. Then again...It's pretty obvious that the E4 layout is getting noticed by other companies.

thor.caster

08-04-2011 01:21 AM

NT1 CVD

2 Attachment(s)

Hello everybody.:smile:

I have some question from front CVD.

E4 can use CVD from Xray NT1 or not I look it's very close to can use.

My E4FS I play " Counter steer Drift " it's want many turn angle very much.
For pretty action when "counter steering" .

My E4FS modify everything for more turn angle already.
But CVD it's problem. When I drift with end of turn angle wheel shake many.
And front CVD broken in not long time.

Now I look CVd of Xray NT1 this shape look very close to E4.
I hope somebody try . I try to ask at this post.

Pict of my E4FS and Xray NT1 CVD. And clip I Drift CS in my room.:p

http://www.youtube.com/watch?v=xeg85...el_video_title

Regards.Thor.

thor.caster

08-04-2011 03:35 AM

Xray shaft.

Quote:

Originally Posted by Thomas P (Post 4839601)

Sorry to going some Off here, but any idea what a Almost Brand new E4 can be worth? Here is some Pics on what. 1 race and 2-3 practice indoor, thats it. (it have the light Spool,and special belts (wider) and Xray shafts)

http://i123.photobucket.com/albums/o...t/DSC_0063.jpg
http://i123.photobucket.com/albums/o...t/DSC_0065.jpg
http://i123.photobucket.com/albums/o...t/DSC_0064.jpg
http://i123.photobucket.com/albums/o...t/DSC_0062.jpg

Best regards

Thomas

This E4 use Xray drive shaft.
Somebody knows this shaft form what model from Xray.:nod:

Regards.Thor.

Slo_E4

08-04-2011 05:29 AM

Quote:

Originally Posted by Thomas P (Post 4072749)

Just heard...Xray T1 FRONT CVD fits the T; E4 car...can someone tell me? are direct fit for front with out major mods?

/Thomas P

Quote:

Originally Posted by gansei (Post 4072911)

no mods necessary..

and must use Xray pin protector.

only use T1 universial shaft.. no T1 axle

Quote:

Originally Posted by Thomas P (Post 4073314)

Gansei can i use th shaft in the rear to?

Quote:

Originally Posted by gansei (Post 4074211)

yes, you can!! front/rear all!!!

and TM will release front/rear 7075 alum NEW CVD!!! (had no pin protector)
(previous CVD is 6065 alum)

Here we go Thor!

thor.caster

08-04-2011 08:51 AM

CVD

Quote:

Originally Posted by Slo_E4 (Post 9480801)

Here we go Thor!

Thank you very much. Mr. Brian. :smile:

colmo

08-06-2011 07:49 AM

Comet RC of the UK seem to have closed, their website is down. That leaves the UK without a Team Magic distributor for the moment - I'm awaiting a reply to an email I sent TM about the situation.

Despite the doom and gloom, someone then offered me an original E4, hardly used, and cheaply...not one to refuse a good deal, I bought it.

I doubt very much I'll be getting another TC for a while, what with the E4 and 3 x E4JS in the shed!

Pro10noob

08-06-2011 07:58 AM

There is a shop in the Netherlands who sells TM parts.
It used to be VGmodelbouw but now it's called modelbouw4u.
Site at the moment is just a front page but you could send them a mail.
[email protected]

regards Roy

thor.caster

08-09-2011 07:04 AM

New model

About E4 this design very long time from 2007 to now 2110.

Before (long time too) I see some webboard show prototype and E4RS 2011.

In E4RS 2011 it's same E4RS .
Look in picture I see look like E4RS with full option part.

What do you think about new E4 model change.
Still uniqe design.

-3 belt design
-narrow chassis
-balance center motor/center battery

Soon or not .

Just think no serious.....I still love E4RS-FS design very much.:smile:

Marcos.J

08-09-2011 07:10 AM

Quote:

Originally Posted by thor.caster (Post 9501582)

http://www.overrc.com/news/news2011/...ice4rslt1.html

found this looks like a few changes to accomodate lipo and brushless motor chassis is a little wider too.

thor.caster

08-09-2011 08:45 AM

Prototype

1 Attachment(s)

Thank you Marcos.

Before i see this prototype from this web too.

I hope like no other TC.

May be like old E4 prototype look very good.:D

Slo_E4

08-09-2011 01:02 PM

I believe that picture you have there is the "original" design for the E4, way back in the day. Tm quickly realized that that design was horrible, and they came up with the design we all have today. The E4 that you see with Marcos' link, is the new E4. It Will probably be 2012 before we can get our hands on one....maybe :o:lol:

YR4Dude

08-09-2011 01:30 PM

Quote:

Originally Posted by Slo_E4 (Post 9503003)

I don't see any difference between the old car and the new car.:rolleyes:

It just looks like they fixed the problems with the old car such as Lipo and BL compatibility and added all the hop-ups as standard equipement. I wonder what the price will be for that. If it comes out to be the same price as the old car except with all the hop ups it may be a good deal.

But then again, you can also snap up a smok'in deal on the old car, add the YoDog parts and a few hop-ups and still get the same thing.:D

Pro10noob

08-09-2011 01:58 PM

1 Attachment(s)

Somebody interested in some red bling parts??:sneaky::D
Just 1 set of steering Knuckles left and not 2 as seen on pic's

regards Roy

All times are GMT -7. It is currently 01:29 AM.

Page 257 of 276