yes, because I am using lipo that not fit the original design, so I have to change the steering. After it, they perfect match! :lol:

TM have some coming out for the e4.

It will make it to air
 

We have received numerous requests to have the E4 Sedan from Team Magic reviewed on www.rctvlive.com. We are pleased to announce we will have the E4 on a future episode. Thanks for your interest. Jeff

Can someone tell me the spring rate of the standard Kit springs Please

I have found my old Yokomo T/C springs fit if this helps anyone

HTH

Besides overseas where can one get this car and parts readily for this chassis?

Im close to get the E4 BUT
 

What is the weak point of this car ( i will only runt 27T Stock untill i get more Licens points,to do Mod). What is the most comon parts that breaks? what spare should or MUST i have,how is the Belts,the diffs. Did see a pic of the D-bones..that didnt look to good, will this be a issiue on a 27T car?

I will run schumacher rubbers,and a 27T motor, tracks are preaty medium, and grip is medium...what Pinion and Spurs is recomended to have in the butler?

For motor i wi use a Tuned Advance 27T and Advance 5.0 ESC. think 5 cells TSR will be enough.

tips and hints would be good...2 of my club m8s running the E4, one 27T and the other Mod..the ar seems REAL smoth...:)

nude E4
 

http://pds52.cafe.daum.net/image/4/c.../47541f61d3ca5


nessary spare parts: rear,front belts, front/rear susarm,knuckle arm, drive shaft pin protector

Wa !

ok, but in stock 27 i dont think the belts will go, but i ordred some anyway...we only using Schumacher rubbers, no track sauce... What range of springs, and Where can i getém? my local hobbyshop is a TM dealer, but dont have al parts yet, but all the NT arts, will thoose springs fit? and what oil is usble? what W?

i always run E4 with 3.5 or 4.5 brushless motors.

i used TM G4S Spring 1.4,1.5 and shock oil was 350 ~ 450W.

and i also used serpent yellow,white front spring(GP spring)

perfect Gansei, ut ya see i want that to, i have a few systems here..but my License wont let me compete in the Modified class :flaming::D..thank god thats no issiue in buggy for me, free motors/esc

but very much thank you for thoose tips, il get thos asap...maybe some softer...

E4 alum Top Deck middle mount
 

E4 alum Top Deck middle mount

it help to decrease chassis roll....

it will be best option in carpet race or high-grip traction circuit..

http://pds54.cafe.daum.net/image/9/c.../47553c20a213a

http://pds54.cafe.daum.net/image/8/c.../47553c2a219a8

http://pds54.cafe.daum.net/image/8/c.../47553c364d29f

http://pds54.cafe.daum.net/image/6/c.../47553c4564db4

Nice looking Turnbuckles what are they Off , I am yet to run my E4 but the
turnbuckles do worry me they look very weak :eek:

the turnbuckles was mixed products.. kysho, mugen, academy..

i preper the hole embeded turnbuckles!!

Any tip for how i will mount the batterybars at the end of each pack? 5 cell config.Check Ganesi´s lauyout no problem with batt tubes on + and -,BUT with 5 cells it will not be so much space between topdeck and servo..