Still Bill

iTrader: (16)

I got my third booster from the UK. Cannot remember its name. It was better than the Novak and TQ boosters; but, I now run receiver packs (li-fe batteries) for the highest level of performance from my pan cars.

Bill

vinster

Best booster and most popular in the Uk is from Rcdynamics A guy called mark Jordan. Google it and you the company

Still Bill

iTrader: (16)

That's it. Thanks Vinny.

You ready for the IIC...in 2012?

Cheers!

flatusboy

iTrader: (42)

Just picked up a used X-10 LE to go with the new Xi.

Does anyone have any good layout pics for the LE? Or know where to find some?
Im going to be running 1s and a Tekin RS Pro with rx pack.

Thanks in advance

audriusv

iTrader: (12)

I see. So is this one will be ok for me?

http://www.ebay.com/itm/Intellect-6-...item5d2f62a100

How long I can run with one charge? Do you have two and interchange them or use only one and recharge every run?

YoDog

iTrader: (28)

If you can find one of these it has a switch which makes it a bit more convenient.
http://www.dynamiterc.com/Products/D...ProdID=DYN1418

https://www.ssl-stormerhobbies.com/c...pl?pn=FAN27705
charge it after about every 2 or 3, 6 minute runs.

Still Bill

iTrader: (16)

Absolutely the first one with the switch incorporated into the pack and a separate lead for charging. Have this on all three of my pan cars.

The separate switch on the other li-fe unit did not stand up to normal use and had to be replaced with a better quality switch.

I charge every use. Too easy for me to forget if I did it otherwise. I use a separate li-fe pocket charger for this so I do not tie up my regular charger.

Bill

chris_blakey

Hi fella, there is few pics in my blog, I use tekin rs with 1s lipo. I use a booster thought but if you put the rx pack on the opposite side to the receiver it should balance nicely

http://rcgtpancars.blogspot.com/

Still Bill

iTrader: (16)

A couple pics of my carpet LE.

Tekin RS Pro ESC and SMC Li-Fe receiver pack are at the rear.

Has the new reversed servo modification shown in the second picture. A great mod.

Should have the new CRC adjustable top brace next week.

Bill

flatusboy

iTrader: (42)

Thank you both.

RCstraat

iTrader: (3)

Hey guys, I wanna do the servo mod... Could someone send me all the part # that I need please... Im running 17.5 carpet.

chris_blakey

http://teamcrc.com/crc/modules.php?n...windex&catid=2

that shows you all the part numbers, there are two options for the width

RCstraat

iTrader: (3)

Thanks, so if im reading it right i need to order..

17402 + 17403 + 1776 3-piece ... only thing i cant seem to find is the servo mounts... I see the part #3315. Just cant see to located it on the web... Anyone wanna help me out please!!!

Infinite 12th

iTrader: (3)

http://www.google.com/search?rlz=1C1...c+servo+mounts

Still Bill

iTrader: (16)

Stay in the CRC website and use the search function (using "3315") to find the plastic servo mounts - flat.

And I suggest that with your non-boosted car, you will want the standard width plate. With the wide plate, the front tires are all the way out to the full width of the Sophia body. I have both plates to tune my steering to the track conditions.

Bill