not sure but I know I have plenty of steering

would my Twin Detonator arms work on it?

may need some mods. the TL01B arms is a perfect fit as the arms width of TL01 and M03 are the same.

who's all going to the TCS race at Trackside next month FEB 4th 5th..I just got the mini ready I didn't have a good motor for the Novak Race but I do now Ill be running GT1 and mini FT wheel drive MO3L hope to see U there!

Do you guys run stabilizers on your Mini? What is good base setup for high bite carpet

That is one cool mini. How well does it run in dirt being only front wheel drive? I have some extra arms, axles, etc from my wild dagger and they're fit for tlo1, mo3 chassis so I think I'll try that on my second mini.

Hey Guys,
The car was going well for a FWD.
Was only about 3-4 laps behind the 2WD 540 class at our local club track.
Got a pic of the car with no body on.

i''ll try it with the detonator, cuase the detonator is basees off a TL01 chassis, i'll ost a pic of how it turns out if it works.

Kevin, I'll definitely be there and running the same classes as you. You going back to Cincinnatti, too?
Later
Doc

is there any trick/way to get some of the slop out of the front end of the M03
or is this just the way thay are

Kevin, I'm pretty sure you already know this but the TCS race at Trackside is March 4th and 5th. The track will be set-up and open for practice Friday the 3rd.

Based on all the interest I wouldn't be surprised if this is the biggest year yet. We normally have a very large turn out of Mini's and I think GT1 is also going to be a large class.

And what do you mean your motor wasn't that good at Novak I thought you won. I know, it wasn't the car it was the driver

See ya.

Yes... washers.....

does Tamiya sell washer kits or who does that are that thin, i looked at some of my nitro washer kits but they are to big

And hobby store will carry the washers/shims...

here's what i did with my Twin Detonator parts, lol.