tony the swift comes with black can motor? i am planing to get the swift. how is it fare with m04 chasis?

engtat

All the minis come standard with a silver can 540, so you'll have to spend a few more bucks to get a black can Sport-Tuned.

As for the M04's they're a bit of an orphan. Not terribly popular and a bit hard to drive. M03's are a LOT easier to drive and we reckon more fun too.

Tony

what is the must upgrade for mini? i think the shock a must, if yes what are the part number? thanks

shocks & tires.. for the shocks, the super mini ones will do (the ones from the ta05). thats all i could think of. oh, bearings (the m03m lacks a few more).. you could buy more shiny hop-ups from there on. :D

sup, u mean the original Ta05 shock? or the trf shock for ta05?

Just check our website under the M03 race section. All you need to know is in there....

yes its pretty much there. ;)

What Miata body is that?

That'd be a HPI Miata shell you're looking at Adrian.

225mm so it fits nicely on an M03M....

#7205 (Mini) Mazda MX-5 Miata

worked very well on the M04 chassis...TQ & win :D

http://www.hpiracing.com/products/en/7205.html

don't believe it will fit an M03M due to servo location at the top of the chassis?

You might well be correct about that.
I knew the wheelbase was OK but I must admit I've never physically tried to fit one onto an M03. I'll try it when I get home tonight

any one tried the honda civic on m03m chasis? will it fit? thank :)

Yes, however the wheelbase of the Civic body I found when I tried it a couple years ago was right in between the M03 and M03L so flipping the rear arms and modifying them to work with the spacer in the chassis was the key. If Tamiya has an insert in between the two then the civic body is a direct drop on.

cool, also i have a q, for opt 53344 can it be use in m03l the swift kit?