Serpent to 1/10th EP Touring Kit S400
#931
Hi,
i also used the geardiff at the Xceed Cup...
I made a good refill at your geariff.....right Rob
Last weekend i drove the second race with the geardiff in Austria and it was really really great again! I won the race again....
Also the trainingdays before it was fascinating !!
No need to rebuild it.....always perfekt!
see you!
Daniel
i also used the geardiff at the Xceed Cup...
I made a good refill at your geariff.....right Rob
Last weekend i drove the second race with the geardiff in Austria and it was really really great again! I won the race again....
Also the trainingdays before it was fascinating !!
No need to rebuild it.....always perfekt!
see you!
Daniel
#932
Tech Rookie
#933
Hi,
i also used the geardiff at the Xceed Cup...
I made a good refill at your geariff.....right Rob
Last weekend i drove the second race with the geardiff in Austria and it was really really great again! I won the race again....
Also the trainingdays before it was fascinating !!
No need to rebuild it.....always perfekt!
see you!
Daniel
i also used the geardiff at the Xceed Cup...
I made a good refill at your geariff.....right Rob
Last weekend i drove the second race with the geardiff in Austria and it was really really great again! I won the race again....
Also the trainingdays before it was fascinating !!
No need to rebuild it.....always perfekt!
see you!
Daniel
#934
#935
Amacing first run!
Hi...
Got the problems with the tweeked chassis fixed - got a new one...
Had my first test of the car this past weekend. Made nine runs during the weekend at our small track (about 11x16 meters, great bite in the carpet, 2 meters wide, nice and flowing track, laptimes around 8,5 sec.).
Allready at my 3. run i made a new track record - over five minutes. Bettered the average time by "only" 1/100 of a sec. 35/5.03,28
Had the record with my Yokomo BD before...
At my nineth and final run I smashed the track record - also for a singel lap! An amacing run! 36/5.05,48 - fastest lap 8,26 (bettered by 0,04)
All I have is the car and the parts from the kit. Ran the car nearly as std. But have to say thanks to John P. for the set-up! Yes it's a very good starting point...
Can't wait to get more parts for the car. Usually the One-way is faster at our track, and less toe in the rear is also used.
So this weekend it's off to my first real race with the S-400. A leg of the Danish Championships, at a vrey small and very twisty track. It's almost one 180 after another... Not my cup off thee...
But with this new car I'm a bit more optemistic.
cheers
Nicolai
Got the problems with the tweeked chassis fixed - got a new one...
Had my first test of the car this past weekend. Made nine runs during the weekend at our small track (about 11x16 meters, great bite in the carpet, 2 meters wide, nice and flowing track, laptimes around 8,5 sec.).
Allready at my 3. run i made a new track record - over five minutes. Bettered the average time by "only" 1/100 of a sec. 35/5.03,28
Had the record with my Yokomo BD before...
At my nineth and final run I smashed the track record - also for a singel lap! An amacing run! 36/5.05,48 - fastest lap 8,26 (bettered by 0,04)
All I have is the car and the parts from the kit. Ran the car nearly as std. But have to say thanks to John P. for the set-up! Yes it's a very good starting point...
Can't wait to get more parts for the car. Usually the One-way is faster at our track, and less toe in the rear is also used.
So this weekend it's off to my first real race with the S-400. A leg of the Danish Championships, at a vrey small and very twisty track. It's almost one 180 after another... Not my cup off thee...
But with this new car I'm a bit more optemistic.
cheers
Nicolai
#936
Excellent to hear Nicolai, glad I could help as well. Let us know how the next meet goes
#937
#938
Serpent S400 gear diff set RR 35T 401144
Serpent S400 gear diff set RR 35T 401144
Now on Stock!!!
http://www.the-border.com/product.ph...0&cat=0&page=1
Now on Stock!!!
http://www.the-border.com/product.ph...0&cat=0&page=1
#939
Tech Initiate
Serpent S400 gear diff set RR 35T 401144
Now on Stock!!!
http://www.the-border.com/product.ph...0&cat=0&page=1
Now on Stock!!!
http://www.the-border.com/product.ph...0&cat=0&page=1
#940
Tech Initiate
#941
Tech Initiate
#943
How is the durability of the car?
How much beating can it take compared to other cars out there?
( I have one on the way - and I just want to be ready for it.. )
How much beating can it take compared to other cars out there?
( I have one on the way - and I just want to be ready for it.. )
#944
Tech Initiate
The front alloy bulkhead caps ( the shock tower screws to them ) have a habit of bending. I have had one bent on me and a freind has had both completly shear, although that by all acoounts was quite a hard head on hit.
He also snapped the chassis
Also have some spare bearings to hand. They do get rough after a while but I have cleaned mine out and re-oiled them and they are good again. Others have not been so lucky.
He also snapped the chassis
Also have some spare bearings to hand. They do get rough after a while but I have cleaned mine out and re-oiled them and they are good again. Others have not been so lucky.
#945
Thanks shawnh..
What pitch is the stock spur?
I have a sh*tload of 0.4 pitch pinions from Tamiya, and I wonder if the 0.4p/105t spur from the TA05 will fit..?
..or do I need to go shoping for 48p pinions??
What pitch is the stock spur?
I have a sh*tload of 0.4 pitch pinions from Tamiya, and I wonder if the 0.4p/105t spur from the TA05 will fit..?
..or do I need to go shoping for 48p pinions??