5LikesAlex Racing Barracuda R2 & R3
11-09-2003, 07:12 PM
#6721
Originally posted by Ko Racer
OH NO................
OH NO................
11-09-2003, 07:25 PM
#6722
Originally posted by Herminator
Well it's just something to try, usualy it's not the overall spring strength that makes a difference, it's the balance with the car. Often a good tarmac setup thats easy to drive is pretty good indoors, then you can start going one step softer all round and see how things go. This is how I went with my Alex Racing springs but may have gone too soft now, just trying to define a few limits to work within for an event on the 30th.
Anyway, is it red's on the front and whites on the rear?
Well it's just something to try, usualy it's not the overall spring strength that makes a difference, it's the balance with the car. Often a good tarmac setup thats easy to drive is pretty good indoors, then you can start going one step softer all round and see how things go. This is how I went with my Alex Racing springs but may have gone too soft now, just trying to define a few limits to work within for an event on the 30th.
Anyway, is it red's on the front and whites on the rear?
11-09-2003, 07:27 PM
#6723
Originally posted by EAMotorsports
Yea its tight....it wouldnt be so bad but since I am right handed (a normal person!!) and I have to use my left hand to put the motor screws in its hard!!
Here is a pic of my new web body
ea
Yea its tight....it wouldnt be so bad but since I am right handed (a normal person!!) and I have to use my left hand to put the motor screws in its hard!!
Here is a pic of my new web body
ea
11-09-2003, 07:42 PM
#6724
Yea Jason does them....Most of the time anyway... He stays so busy it takes a while sometimes.
I put all the spring measurements in one chart for anyone wanting to print it out to put in their setup folders for the track. Anyone wanting it just email me. Its in excell format and it wont let me post it here.
ea
I put all the spring measurements in one chart for anyone wanting to print it out to put in their setup folders for the track. Anyone wanting it just email me. Its in excell format and it wont let me post it here.
ea
11-09-2003, 08:08 PM
#6726
Originally posted by Herminator
Don't know how you get away with using Rayspeed springs, they give me far too much ride height
Very nice shell EA, bright enough for people to see you lapping them
Sprayed myself a new Alfa 2.0, just a very quick one colour job using an old can I had lying around doing nothing, my old Alfa is literaly falling apart Will have something more worthy for my cuda soon 
Don't know how you get away with using Rayspeed springs, they give me far too much ride height
Very nice shell EA, bright enough for people to see you lapping them
Sprayed myself a new Alfa 2.0, just a very quick one colour job using an old can I had lying around doing nothing, my old Alfa is literaly falling apart
Will have something more worthy for my cuda soon 
I can get all the way down to a 4mm ride height with the Rayspeed Springs 
-Dave
11-09-2003, 08:13 PM
#6729
Originally posted by ImGoinRCn
. Another thing, I'm trying to get that black Xenon sold for you by a local racer. He loves our Cudas, he is always in my pits drooling over it.
. Another thing, I'm trying to get that black Xenon sold for you by a local racer. He loves our Cudas, he is always in my pits drooling over it.
what a waste
.. I spent some serious $$$ to get that thing in Black -Dave
11-09-2003, 08:23 PM
#6731
Originally posted by JDM_DOHC_SiR
what a waste .. I spent some serious $$$ to get that thing in Black
-Dave
what a waste .. I spent some serious $$$ to get that thing in Black -Dave
When will the R3 be out Dave? I may want one to try out!! or just try the steering rack on my car since that is about the only difference between it and an r2 with pal chasis.
ea
11-09-2003, 08:30 PM
#6732
Originally posted by EAMotorsports
He's not going to sell the black one...He likes it too much. If any of them go I think he said the blue would go. But he will probably keep them both...He is going to cancel his order for his r3 I think.
When will the R3 be out Dave? I may want one to try out!! or just try the steering rack on my car since that is about the only difference between it and an r2 with pal chasis.
ea
He's not going to sell the black one...He likes it too much. If any of them go I think he said the blue would go. But he will probably keep them both...He is going to cancel his order for his r3 I think.
When will the R3 be out Dave? I may want one to try out!! or just try the steering rack on my car since that is about the only difference between it and an r2 with pal chasis.
ea
anyways the R3 will come out in Late December
and if you were to know someone who could modify the lower deck and make a new forward upper deck you could use the TC-3 style steering system cough cough Barry cough
-Dave
11-09-2003, 10:14 PM
#6734
Eric...
Eric... man first of all I was only bugging you. Second EVERYONE knows you always got the speed. You were the fastest bar none I never denied that. All I said was is that you weren't beating me in the corners... What I SHOULD have said was you weren't beating me entering or in the middle of the corners. Where you were fast was the exits of EVERY corner. Whether it be motor, battery, car, driver or whatever. Just don't get bent out of shape. I apologized already, but again I'm sorry if I said it wrong or you took it the wrong way, but dogging me at the track or making comments on here doesn't help anything.
sorry...
sorry...