Alex Racing Barracuda R2 & R3
#5701
Tech Master
Originally posted by Ko Racer
here is another
here is another
#5702
Regional Moderator
Originally posted by NismoSkyline17
Where can I get the rollcenter mounts that moves the camber link down below the top plate?
Where can I get the rollcenter mounts that moves the camber link down below the top plate?
speedway pal part # PB042.......... hubs PB041 and PB043 front and rear.
#5703
Regional Moderator
Originally posted by ImGoinRCn
When I got my screws and one way in yesterday, I started building right away. I did figure why my car wouldn't rotate forward, a screw that went into the knuckle was hitting the cvd...I'll be ready for Nov. 1st. Got a good 19 turn. I need to mount the sway bars and change the oil in the shocks and finish putting in the electronics and I'll be set. Oh yeah, I have 2 bodies to paint, an alfa and my chevron body.
When I got my screws and one way in yesterday, I started building right away. I did figure why my car wouldn't rotate forward, a screw that went into the knuckle was hitting the cvd...I'll be ready for Nov. 1st. Got a good 19 turn. I need to mount the sway bars and change the oil in the shocks and finish putting in the electronics and I'll be set. Oh yeah, I have 2 bodies to paint, an alfa and my chevron body.
SOOOOOOO heath happy ? and what colors are you doing your bodies?
I have 4 of these alex bodies im going to be using for some fuzzzzzz racing
#5704
Tech Master
Thanks
#5705
R/C Tech Elite Member
iTrader: (47)
Originally posted by SpeedTech
Randman,
I should be, but I'll need some power to charge though...I'm not sure if Dan's got that.
Steve Wang
Randman,
I should be, but I'll need some power to charge though...I'm not sure if Dan's got that.
Steve Wang
#5706
Regional Moderator
iTrader: (4)
Originally posted by Ko Racer
SOOOOOOO heath happy ? and what colors are you doing your bodies?
I have 4 of these alex bodies im going to be using for some fuzzzzzz racing
SOOOOOOO heath happy ? and what colors are you doing your bodies?
I have 4 of these alex bodies im going to be using for some fuzzzzzz racing
#5707
Regional Moderator
Originally posted by ImGoinRCn
Not sure, maybe my floresent green or paint it the same color as the grey carpet... I'm pretty happy, wish I had a digital so I can get some pics but most know what a Xenon Cuda looks like. What is the Alex bodies you was talking about?
Not sure, maybe my floresent green or paint it the same color as the grey carpet... I'm pretty happy, wish I had a digital so I can get some pics but most know what a Xenon Cuda looks like. What is the Alex bodies you was talking about?
here you a photo
#5709
Regional Moderator
Originally posted by ImGoinRCn
I remember them now...those are pretty cool looking...can't wait to put some tire paint on them
I remember them now...those are pretty cool looking...can't wait to put some tire paint on them
#5711
Regional Moderator
Originally posted by Randman
You need to stop showin those off Joseph
You need to stop showin those off Joseph
I tried to send steve one to run but he had one already painted and ready to go. sorry for the photo
#5713
Regional Moderator
Originally posted by ImGoinRCn
lol, I'll just lay down an oil slick and watch you spin, lol
lol, I'll just lay down an oil slick and watch you spin, lol
there you go
#5715
KO,
Thank you for the offer, I didn't want to mess up that beautiful paint job on your car. Plus some guys might complaint because it was not a body widely available to the public, otherwise, I would love to run one of those.
Steve Wang
Thank you for the offer, I didn't want to mess up that beautiful paint job on your car. Plus some guys might complaint because it was not a body widely available to the public, otherwise, I would love to run one of those.
Steve Wang