New X10P4 Touring Car From MLP
#407
Tech Regular
Marty, just so I am straight, 2-3 weeks after ordering I would have the car, it will have the cyclone suspension and diffs, and you will include whichever shocks I ask for in the kit. Are you still putting front diff and one way in the kit? I should be putting in an order this evening. I appreciate your answering my questions so thoroughly though, and btw I wasn't looking for anything free just have to make sure about what I am getting because I cant afford to buy too many cars in a season.
#408
Cool. Here email me at [email protected] or call me at 630 220 1157 best time before 4pm or after 7pm central time and we can go more into a detailed reply ok.
the car was first tested with the Tamiya arms and drives and then the HPI Pro4 arms and drives and now we have the Hot body stuff on order I have a set here, and they are all the same! or I should say in size.
I have a 4 set of the Yokomo BD arms and drives and so on coming in for Jonn and Fred to give them the adjustments they want, we will offer the same to everyone but I want them to get here first.
All Chassis will have holes to mount the suspension arms from Tamiya HPI and Cyclone They are all the same holes. and I think the BD suspension will work as well.
So we will offer a standard setup with Cyclone arms and C-hubs and Knuckles
Shafts. (same as HPI) people are asking me all of the time what will they do if there are no HPI arms Tamiya HPI Cyclone and I think Yokomo all mount the same.
We have our own diffs housings and will run the Cyclone gears it will still be the same drive system with a new motor and spur mount (weight is the thing here) Lighter - same diff mounts and bearings it will come with 2 diffs 1 oneway and a center oneway.
The standard Chassis kit will be made of a 2.0mm Upper and lower Chassis.
Now the Yokomo suspension might be offered as a upgrade or an upgrade to your order ok.
see pictures
the car was first tested with the Tamiya arms and drives and then the HPI Pro4 arms and drives and now we have the Hot body stuff on order I have a set here, and they are all the same! or I should say in size.
I have a 4 set of the Yokomo BD arms and drives and so on coming in for Jonn and Fred to give them the adjustments they want, we will offer the same to everyone but I want them to get here first.
All Chassis will have holes to mount the suspension arms from Tamiya HPI and Cyclone They are all the same holes. and I think the BD suspension will work as well.
So we will offer a standard setup with Cyclone arms and C-hubs and Knuckles
Shafts. (same as HPI) people are asking me all of the time what will they do if there are no HPI arms Tamiya HPI Cyclone and I think Yokomo all mount the same.
We have our own diffs housings and will run the Cyclone gears it will still be the same drive system with a new motor and spur mount (weight is the thing here) Lighter - same diff mounts and bearings it will come with 2 diffs 1 oneway and a center oneway.
The standard Chassis kit will be made of a 2.0mm Upper and lower Chassis.
Now the Yokomo suspension might be offered as a upgrade or an upgrade to your order ok.
see pictures
Last edited by Marty Peterson; 08-03-2008 at 12:45 PM.
#409
Tech Regular
Marty, sent you an email.
Tom
Tom
#412
Originally Posted by lawtonlosi
Marty,
Would you maybe offer a battery strap and posts seperate? I think that might adapt well to my cyclone.
Would you maybe offer a battery strap and posts seperate? I think that might adapt well to my cyclone.
Are there holes for them on your cyclone? It thought it only had tape slots if so trace out the chassis and send it to me and I will make you a set ok. Or send a Lower Chassis for you would need to countersink the holes or can you do this?
#414
Tech Regular
Marty, sent you an email and pm.
#416
Tech Elite
iTrader: (32)
Originally Posted by Marty Peterson
Are there holes for them on your cyclone? It thought it only had tape slots if so trace out the chassis and send it to me and I will make you a set ok. Or send a Lower Chassis for you would need to countersink the holes or can you do this?
#419
Tech Regular
pm back to you marty