Roche Rapide P12 Evo2 1/12th Competition Kit
#76
Tech Elite
#77
Looks like a three position caster setting...nice!
#78
#79
Tech Elite
Not sure - I initially thought tape but not confirmed.
#80
Tech Elite
#81
Tech Elite
More details of Rapide P12 EVO2, Fully Fine Adjustable Front Suspension.
- Caster : 3/4/5/6/7 degree selectable.
- Reactive Caster : 0-5 degree fine adjustable.
- Roll Center : adjustable long or short upper arm by lower bulkhead in different direction.
- New upper arm with body upstop.
- New aluminium offset pivot ball holder.
- New single piece lightweight steering knuckle with axle.
- New spring steel kingpin.
- New graphite lower arm.
- Caster : 3/4/5/6/7 degree selectable.
- Reactive Caster : 0-5 degree fine adjustable.
- Roll Center : adjustable long or short upper arm by lower bulkhead in different direction.
- New upper arm with body upstop.
- New aluminium offset pivot ball holder.
- New single piece lightweight steering knuckle with axle.
- New spring steel kingpin.
- New graphite lower arm.
#82
#84
Tech Elite
#85
Tech Elite
... the stop allows the body to be run lower without touching down on the racing surface when the car rolls/leans in the corner. The stop will push the body up when cornering.
#86
#87
First order for RocheRC USA has arrived. We are matching the inventory to back orders and will post an update if there are any unspoken for
#88
It is a tape in battery setup, guess that is due to the new chassis design.
pictures...https://site.petitrc.com/reglages/ro...dep12/P12Evo2/
pictures...https://site.petitrc.com/reglages/ro...dep12/P12Evo2/
#89
Tech Elite
Very interesting what they did with the upper pivot ball design. It aluminum (not plastic) and the damping is applied within the upper pivot ball assembly - not on the kingpin. The steering block pivots on the kingpin and isn't affected by the damping fluid in the upper pivot ball assembly.
#90