T.O.P. Racing "Scythe" 1/10 EP Touring Car
#856
Hy Scythe Racer,
Racing Art Company (German T.O.P. Distributor) invites YOU to the 2nd GERMANY SUMMERCHAMPS in 2008.
Date: June 5th - 8th
Location: Hann.Münden (Germany)
Class: TC Modified /TC 19T /TC 27T /TC FUN /1/12 Modified /Formula One
For more Information click on www.summerchamps.de
Hope too see YOU to the Summerchamps 2008
Racing Art Company (German T.O.P. Distributor) invites YOU to the 2nd GERMANY SUMMERCHAMPS in 2008.
Date: June 5th - 8th
Location: Hann.Münden (Germany)
Class: TC Modified /TC 19T /TC 27T /TC FUN /1/12 Modified /Formula One
For more Information click on www.summerchamps.de
Hope too see YOU to the Summerchamps 2008
#857
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Sorry about the quality of the pics... I used my wife POS camera....
Last edited by Nova F1 Racer; 10-21-2008 at 07:15 PM.
#858
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Nova you need to get a Futaba 9550 for that car. The servo will not hang so far off the chassis for you.
#860
Do what Marcos suggests and to get or check if you have the other servo mount that comes in teh kit.
This mount has a offset so you can turn it around for more or less clearance with top brace.
Im waiting my BLS451 servos to arrive so would be even better.
This mount has a offset so you can turn it around for more or less clearance with top brace.
Im waiting my BLS451 servos to arrive so would be even better.
#861
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
WDY, I am going to look at a different servo as this is the one I had from the X0ray... I didn't like the way in was hanging over the chassis...
Marcos, See above... When I mounted the servo on the other side the tire would hit the edge of the servo so thats why I put it on the outside.... Maybe with a different servo it won't hit it....
#862
Just move it more inboard and you wont have a issue with touching.
I can run 65mm foams with out any issues.
I can run 65mm foams with out any issues.
#863
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Better pics tomorrow I hope....
#866
Tech Addict
iTrader: (4)
I noticed Josh Cyrul finished 2nd behind Keven Hebert in Open Mod at the JACO/SMC Canadian Challenge this past weekend. Keven has been on fire lately.
I'm curious to know how different Josh's car is to the regular Scythe since Snowbirds?
http://fastcats.ca/jaco_smc_canadian...m_A-Main-3.pdf
I'm curious to know how different Josh's car is to the regular Scythe since Snowbirds?
http://fastcats.ca/jaco_smc_canadian...m_A-Main-3.pdf
#867
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
Well, I remounted it and now it fits very nicely.... I looked again and found out that I used a different servo the first time - Airtronics, this time I used a
Ko-propo servo....
Ko-propo servo....
#868
cool nice to hear you sorted
#869
Tech Champion
iTrader: (3)
Join Date: Mar 2003
Location: Peoples Republic of Northern Virginia
Posts: 5,682
Trader Rating: 3 (100%+)
THX... Now the $$$ question... Does anyone know of a list of "other car parts" that this car can use? I seem to recall Josh saying he used X-ray arms and knuckles at the Birds.... HPI arms came with the kit....
I'm going to be looking for aluminum C-hubs/steering block/etc after I get used to it....
THX in advance.. Looks like this weekend will be it's first action...
I'm going to be looking for aluminum C-hubs/steering block/etc after I get used to it....
THX in advance.. Looks like this weekend will be it's first action...