New Schumacher KF2
|
|||
#1201
Opinion needed..running in mid motor,graphite chassis with aluminum braces...do I really need the front upper deck ? I 'm running a fan and the deck is getting in the way
#1202
Tech Regular
No, the aluminum braces eliminate the need for the top deck (forward of the motor). I would still run the braces that go between to motor mount and transmission
#1203
#1204
Finally got the Losi wheels to work...fronts worked fine..the tears I had to Drexel a little inside where the but sits and a little where the hex sits...then us Losi 4mm low profile nuts from the 22-4...perfect !
#1206
Hello, i bought a used KF2 SE and i am trying to understand this setup: Schumacher Cougar KF2 - Michal Orlowski - 2016 oOple Race - Robon Hood Raceway - 06-07.08.2016
What does reversed wishbones mean? Differences between sv2 and kit front wishbones?
Is he running rear shock in front of the arm?
How can i add 20g behind the gearbox?
Thanks in advance
What does reversed wishbones mean? Differences between sv2 and kit front wishbones?
Is he running rear shock in front of the arm?
How can i add 20g behind the gearbox?
Thanks in advance
#1207
Tech Regular
Hello, i bought a used KF2 SE and i am trying to understand this setup: Schumacher Cougar KF2 - Michal Orlowski - 2016 oOple Race - Robon Hood Raceway - 06-07.08.2016
What does reversed wishbones mean? Differences between sv2 and kit front wishbones?
Is he running rear shock in front of the arm?
How can i add 20g behind the gearbox?
Thanks in advance
What does reversed wishbones mean? Differences between sv2 and kit front wishbones?
Is he running rear shock in front of the arm?
How can i add 20g behind the gearbox?
Thanks in advance
#1208
#1209
Tech Regular
#1210
Got this nib KF2 a few weeks back. Never raced buggies with jumps before.
A few more hours and I'm ready to take a beating by the local klan.
Must say that Schumacher is a nice acquaintance.
Pretty impressed by the quality of this kit
A few more hours and I'm ready to take a beating by the local klan.
Must say that Schumacher is a nice acquaintance.
Pretty impressed by the quality of this kit
#1211
Almost done.
Any tips for a buggy noob before I hit the track?
Any tips for a buggy noob before I hit the track?
#1212
Car is more ready than I am.
Going to a race next weekend. First time running a track with jumps. First time running this car. And I will not get any track time before the first qualifier .
Wish me luck....
Going to a race next weekend. First time running a track with jumps. First time running this car. And I will not get any track time before the first qualifier .
Wish me luck....
#1213
Tech Rookie
Double post
#1214
Tech Rookie
Hi
I know this is an old thread but I'm looking for some advice.
I bought a used KF2 and I'm trying to work out if fitting my standard shorty (non LCG) LIPOs will work with it.
I've got them to fit by shaving off some of the plastic chassis rail but the LIPO posts are too short. Are there any replacements that will fit or am I out of luck?
Cheers
I know this is an old thread but I'm looking for some advice.
I bought a used KF2 and I'm trying to work out if fitting my standard shorty (non LCG) LIPOs will work with it.
I've got them to fit by shaving off some of the plastic chassis rail but the LIPO posts are too short. Are there any replacements that will fit or am I out of luck?
Cheers
#1215
Tech Adept