BJ4 or ???
#1
BJ4 or ???
Hey guys, new to this forum. I haven't raced in probably 8 years or so because of a lack of facilities. However a very nice new shop/track has opened up near me and I wanna start racing again! It's a large indoor hard packed clay track with high traction and flows really well. My question is that I still have most of my old R/C car stuff (tools, chargers etc) and a BJ4 non worlds kit that I never finished building. Since I've never driven the car I'm wondering if it will fit my driving style or if I should sell it and look elsewhere. Previously I raced a XXX4 G+ but I never really liked racing that car. The track I raced at before was over two hours away so I never had time to practice and get my car dialed in before it closed. I had the XXX set up with a one way front and it had way too much steering to suit me. Occasionally I could turn laps on par with the fastest cars in the class but the car was just too inconsistent. I'd rather have the car a smidge tight rather than loose. You guys that have ran both, will the BJ4 be more predictable than the XXX? When I raced last there wasn't near as many 4 wheelers on the market as there are now. You pretty much had the Losi cars or maybe a Schumacher cat but the LHS didn't stock parts for much else. Now that there are more options I'm just wondering if there is a better option for a club racer who wants a predictable chassis that is competitive enough. Back in the day I raced a Kyosho Optima Mid that was absolutely dialed! I guess it kinda spoiled me because that car would damn near drive itself, the XXX , not so much...
#2
Hey guys, new to this forum. I haven't raced in probably 8 years or so because of a lack of facilities. However a very nice new shop/track has opened up near me and I wanna start racing again! It's a large indoor hard packed clay track with high traction and flows really well. My question is that I still have most of my old R/C car stuff (tools, chargers etc) and a BJ4 non worlds kit that I never finished building. Since I've never driven the car I'm wondering if it will fit my driving style or if I should sell it and look elsewhere. Previously I raced a XXX4 G+ but I never really liked racing that car. The track I raced at before was over two hours away so I never had time to practice and get my car dialed in before it closed. I had the XXX set up with a one way front and it had way too much steering to suit me. Occasionally I could turn laps on par with the fastest cars in the class but the car was just too inconsistent. I'd rather have the car a smidge tight rather than loose. You guys that have ran both, will the BJ4 be more predictable than the XXX? When I raced last there wasn't near as many 4 wheelers on the market as there are now. You pretty much had the Losi cars or maybe a Schumacher cat but the LHS didn't stock parts for much else. Now that there are more options I'm just wondering if there is a better option for a club racer who wants a predictable chassis that is competitive enough. Back in the day I raced a Kyosho Optima Mid that was absolutely dialed! I guess it kinda spoiled me because that car would damn near drive itself, the XXX , not so much...
#3
Might
#5
I guess what I'm asking is how does the BJ4 compare to the XXX4 as far as handling? The XXX4 I think I had set up with a spool and one way bearings on the front and it had A LOT of turn in. No amount of chassis tuning could get the car where I really wanted it. Don't get me wrong, it was fast through the turns but you really had to take a perfect line through each turn, it was very unforgiving. I always wanted to try a ball diff in the front of that car but with the inability to practice it never happened. At any rate, the track I'm going to race at now is essentially set up for 1/8 and 1/10 scale so it's large with sweeping turns so it ought to be more 4wd friendly. I've been to plenty of tracks and seen guys with "outdated" chassis' kick plenty of butt. It really comes down to driver and set up at the club level. But you're right, a lot has changed since I raced last as far as electronics. I assume I can have my Turbo 35 reprogrammed for LiPo? and maybe reuse my servos but that's about it...
#8
#9
The XXX is long gone, I have a 1st gen BJ4 now but I do like the 22-4. When I was on the preorder list for the BJ an "X-5" conversion kit came out for the XX4 buggy and I seriously considered one but never did.