Team Associated T5M Discussion
#1351
Could use this until the correct hexes come out.
http://www.avidrc.com/product/5/acce...cessories.html
http://www.avidrc.com/product/5/acce...cessories.html
#1354
Tech Master
iTrader: (16)
I use the T4/B4 front bumper, its a direct fit.
http://www.amain.com/rc-cars/team-as...asc9562/p21077
http://www.amain.com/rc-cars/team-as...asc9562/p21077
#1357
I'm running the 2 hole insert with camber link on inside hole in the up position. The shock is with one internal limiter and a stroke of 35mm. The picture is shown at full droop. Wheels are DE Speedline T4.2.
Do I feel it's excessive? Yes, on high bite. No, on med bite. Our track is med/high bite and it didn't have a push or traction roll with sauced SS Chainlinks on the rear. The hub is also forward too... Looks like I need to do some cleaning...
Do I feel it's excessive? Yes, on high bite. No, on med bite. Our track is med/high bite and it didn't have a push or traction roll with sauced SS Chainlinks on the rear. The hub is also forward too... Looks like I need to do some cleaning...
#1358
#1359
Tech Adept
iTrader: (6)
I'm running the 2 hole insert with camber link on inside hole in the up position. The shock is with one internal limiter and a stroke of 35mm. The picture is shown at full droop. Wheels are DE Speedline T4.2.
Do I feel it's excessive? Yes, on high bite. No, on med bite. Our track is med/high bite and it didn't have a push or traction roll with sauced SS Chainlinks on the rear. The hub is also forward too... Looks like I need to do some cleaning...
Attachment 1285644
Attachment 1285645
Do I feel it's excessive? Yes, on high bite. No, on med bite. Our track is med/high bite and it didn't have a push or traction roll with sauced SS Chainlinks on the rear. The hub is also forward too... Looks like I need to do some cleaning...
Attachment 1285644
Attachment 1285645
#1360
3 Gear Set Ups
Wondering if Cole Tollard's set up sheet on ae website is 3 gear dependent? I run 4 gear.
#1362
R/C Tech Elite Member
iTrader: (207)
Started my build last night box stock....ill thrown x-rings in on my first shock re-build....same for all the ft alum. bits....build is super easy and smooth....got yellow wheels, aka inserts and m4 ions coming.
Electronics layout is looking like this:
Reedy blackbox esc
Reedy 8.0 motor
Reedy sq. Lipo
Reedy t-servo
Electronics layout is looking like this:
Reedy blackbox esc
Reedy 8.0 motor
Reedy sq. Lipo
Reedy t-servo
#1363
Started my build last night box stock....ill thrown x-rings in on my first shock re-build....same for all the ft alum. bits....build is super easy and smooth....got yellow wheels, aka inserts and m4 ions coming.
Electronics layout is looking like this:
Reedy blackbox esc
Reedy 8.0 motor
Reedy sq. Lipo
Reedy t-servo
Electronics layout is looking like this:
Reedy blackbox esc
Reedy 8.0 motor
Reedy sq. Lipo
Reedy t-servo