Hobbyking 60A ESC
#46
I've got one of these ESCs and am a little confused by the firmwares available for it.
Does anyone know what each one does?
In the Hobbywing USB software, I get the following options for firmware.
V3.0_110930_MOD
V3_508_No_Timing
V3.0_110930STOCK
V1.10_090323a_m
V1.0_090205_MOD
V1_508_zero_rev
Thanks in advance for any help.
Tony.
Does anyone know what each one does?
In the Hobbywing USB software, I get the following options for firmware.
V3.0_110930_MOD
V3_508_No_Timing
V3.0_110930STOCK
V1.10_090323a_m
V1.0_090205_MOD
V1_508_zero_rev
Thanks in advance for any help.
Tony.
#47
Tech Apprentice
I ran mine for the first time tonight.
Pretty pleased with it, but there was one problem. If I left the car alone for maybe 10 seconds (when we were lining up to start the race), there was a delay between me pressing the trigger and the car starting up. Has anyone else experienced anything similar?
It seemed fine if I had been running, stopped and then started again. It was only when I was waiting on the grid, I'd press the trigger, and a second later the car would move.
Tony.
Pretty pleased with it, but there was one problem. If I left the car alone for maybe 10 seconds (when we were lining up to start the race), there was a delay between me pressing the trigger and the car starting up. Has anyone else experienced anything similar?
It seemed fine if I had been running, stopped and then started again. It was only when I was waiting on the grid, I'd press the trigger, and a second later the car would move.
Tony.
#48
Tech Apprentice
I've found what the problem is regarding the start delay (on my ESC anyway). I'm running in blinky, with a 17.5t sensored motor.
To get the delay on start, I reverse and then come to a stop. Then if I pull the trigger on the transmitter, there is a .5 second delay (or so) before the car moves.
Does this happen to anyone else?
To get the delay on start, I reverse and then come to a stop. Then if I pull the trigger on the transmitter, there is a .5 second delay (or so) before the car moves.
Does this happen to anyone else?
#49
Tech Apprentice
Anyone else have any trouble with these?
My son's will now only run in sensorless mode.
My son's will now only run in sensorless mode.