TLR TEN-SCTE 2.0 Kit Thread
#1172
Tech Master
iTrader: (1)
Conversion parts.
---------------------------
TLR231009 chassis 2.0-$ 105
TLR231000 side guards $ 9
TLR231002 batt strap $ 4
TLR231003 thumb screws $ 6
TLR231004 batt stops $ 6
TLR231005 servo mnt $ 6
TLR231007 batt pads $6
TLR231010 torque rods x2 $ 14
TLR 231011 7075 mtr mnt $ 18
TLR231001 Diff wire mnt $ 5
Prolly a few other parts , total=about $175 it looks for me.
Last edited by BmainStar; 03-04-2013 at 02:23 PM.
#1173
Ya just want to run the 2.0 like You LOL...
Conversion parts.
---------------------------
TLR231009 chassis 2.0-$ 105
TLR231000 side guards $ 9
TLR231002 batt strap $ 4
TLR231003 thumb screws $ 6
TLR231004 batt stops $ 6
TLR231005 servo mnt $ 6
TLR231007 batt pads $6
TLR23100 torque rods x2 $ 14
TLR 231011 7075 mtr mnt $ 18
Prolly a few other parts , total=about $175 it looks for me.
Conversion parts.
---------------------------
TLR231009 chassis 2.0-$ 105
TLR231000 side guards $ 9
TLR231002 batt strap $ 4
TLR231003 thumb screws $ 6
TLR231004 batt stops $ 6
TLR231005 servo mnt $ 6
TLR231007 batt pads $6
TLR23100 torque rods x2 $ 14
TLR 231011 7075 mtr mnt $ 18
Prolly a few other parts , total=about $175 it looks for me.
If you buy just the 2.0 chassis and side guards you cant just use the 1.0 servo mounts and the other things from it ?
#1174
Tech Master
iTrader: (83)
Ya just want to run the 2.0 like You LOL...
Conversion parts.
---------------------------
TLR231009 chassis 2.0-$ 105
TLR231000 side guards $ 9
TLR231002 batt strap $ 4
TLR231003 thumb screws $ 6
TLR231004 batt stops $ 6
TLR231005 servo mnt $ 6
TLR231007 batt pads $6
TLR23100 torque rods x2 $ 14
TLR 231011 7075 mtr mnt $ 18
Prolly a few other parts , total=about $175 it looks for me.
Conversion parts.
---------------------------
TLR231009 chassis 2.0-$ 105
TLR231000 side guards $ 9
TLR231002 batt strap $ 4
TLR231003 thumb screws $ 6
TLR231004 batt stops $ 6
TLR231005 servo mnt $ 6
TLR231007 batt pads $6
TLR23100 torque rods x2 $ 14
TLR 231011 7075 mtr mnt $ 18
Prolly a few other parts , total=about $175 it looks for me.
#1176
Tech Prophet
iTrader: (34)
You will want the upper center diff plate as well for the wire hold downs.
TLR231001
#1177
Tech Master
iTrader: (1)
Nope. hole patters are different for the battey hold down and the servo mounts. You basically need to get everthing that attaches to the middle of the chassis. (That is everthing but the front and rear clip and the center diff asssy)
You will want the upper center diff plate as well for the wire hold downs.
TLR231001
You will want the upper center diff plate as well for the wire hold downs.
TLR231001
#1178
Parts
I have actually responded a few times now about parts. I am working with our purchasing department to figure out what the heck is going on here. They were supposed to be on the same container as thats how we do it now. We are workign to get them here as fast as possible and as soon as I have another update, I will let you know.
#1179
R/C Tech Elite Member
iTrader: (198)
Oh Oh
I have actually responded a few times now about parts. I am working with our purchasing department to figure out what the heck is going on here. They were supposed to be on the same container as thats how we do it now. We are workign to get them here as fast as possible and as soon as I have another update, I will let you know.
#1180
Nope. hole patters are different for the battey hold down and the servo mounts. You basically need to get everthing that attaches to the middle of the chassis. (That is everthing but the front and rear clip and the center diff asssy)
You will want the upper center diff plate as well for the wire hold downs.
TLR231001
You will want the upper center diff plate as well for the wire hold downs.
TLR231001
Oh nevermind that will me more than $100. Il stick with the 1.0 aftermarket chassis.
#1181
Tech Master
iTrader: (9)
Specs on the servo plus it has 5 stars from everyone for reviews on AMAIN also
Torque: 12kg-cm / 167 oz-in @ 6V
Speed: 0.08 sec/60 degree @ 6V
#1182
I did some looking and for the price i got the Spek S6040 servo and its like $60 or $70 from my LHS guy and grabbing this tomorrow when i get the truck along with a few other goodies to help with the build and will post up pics tomorrow if the storm doesnt hold up delivery
Specs on the servo plus it has 5 stars from everyone for reviews on AMAIN also
Torque: 12kg-cm / 167 oz-in @ 6V
Speed: 0.08 sec/60 degree @ 6V
Specs on the servo plus it has 5 stars from everyone for reviews on AMAIN also
Torque: 12kg-cm / 167 oz-in @ 6V
Speed: 0.08 sec/60 degree @ 6V
#1183
Tech Master
iTrader: (9)
EDIT: also...waiting for a few things to sell on ebay as i sold my 4700kv motor from my 1.0 and plan to try the 4000kv and i also ordered the QTEQ SV Motor Power Terminals for the motor since i broke one of the ears on the motor tabs of the 4700 removing it from the truck when i sold it so this should make things easier
Last edited by TCCustoms; 03-04-2013 at 05:24 PM.
#1184
i was looking at savox but i run spektrum/hobbywing gear and wasnt sure how my spek gear would fair so i went with the spek servo
EDIT: also...waiting for a few things to sell on ebay as i sold my 4700kv motor from my 1.0 and plan to try the 4000kv and i also ordered the QTEQ SV Motor Power Terminals for the motor since i broke one of the ears on the motor tabs of the 4700 removing it from the truck when i sold it so this should make things easier
EDIT: also...waiting for a few things to sell on ebay as i sold my 4700kv motor from my 1.0 and plan to try the 4000kv and i also ordered the QTEQ SV Motor Power Terminals for the motor since i broke one of the ears on the motor tabs of the 4700 removing it from the truck when i sold it so this should make things easier
#1185
Tech Rookie
How does it compare to the tekno sct?