10LikesTLR TEN-SCTE 2.0 Kit Thread
02-04-2015, 06:23 PM
#7681
True, and thank you, and maddog for the explanations, I just don't like just doing something because someone says without understanding why. Both will be coming off before the next race. Also I know it's here somewhere but could not find it, is there a set of sway bars I can buy without modifications to set it up like the new Dunford setup.
02-05-2015, 09:02 AM
#7682
We are working on these as well as other goodies still. I am hoping we should see these by the end of the month or beginning of next.
02-06-2015, 09:41 AM
#7683
Took off the Rpm front bumper and rear skid plate, went back to stock bumper. going to go thru the shocks and check out what pistons are in them, if I need to purchase the ones you suggested what is the part number for them? Also my shock towers are different from the ones on my brothers stock 2.0, I believe that are out of the TLR tuning kit for the 1.0 is there enough difference between the 2 to spen the $$ to get true 2.0 towers?
02-06-2015, 10:01 AM
#7684
Took off the Rpm front bumper and rear skid plate, went back to stock bumper. going to go thru the shocks and check out what pistons are in them, if I need to purchase the ones you suggested what is the part number for them? Also my shock towers are different from the ones on my brothers stock 2.0, I believe that are out of the TLR tuning kit for the 1.0 is there enough difference between the 2 to spen the $$ to get true 2.0 towers?
02-09-2015, 01:58 PM
#7686
I am looking to buy the SCT but I was woundering does anyone know if they will come out with a update SCT than the 2.0??
02-09-2015, 03:27 PM
#7688
Now, none of this is to say there is anything wrong with the truck as it is. The parts are great and the truck is great. But I had a chance before I vacated the line to have at it and fix and re-work a number of parts, so I did.
We of course have some hop ups as always and some of those work for some and some of those do not work for some, but that is why they are option parts of course.
02-09-2015, 03:55 PM
#7689
I have stated a few times now that there is NOT a 3.0 on the way. There is however an updated/reworked 2.0 coming. What I mean is that the 2.0 kit has been gone through and we have worked through most any issues we have found over time with the vehicle. Fit and finish is much better, ring and pinions are much better, metal quality is better, plastics are better. It includes the new TiCN shock shafts and hinge pins.
Now, none of this is to say there is anything wrong with the truck as it is. The parts are great and the truck is great. But I had a chance before I vacated the line to have at it and fix and re-work a number of parts, so I did.
We of course have some hop ups as always and some of those work for some and some of those do not work for some, but that is why they are option parts of course.
Now, none of this is to say there is anything wrong with the truck as it is. The parts are great and the truck is great. But I had a chance before I vacated the line to have at it and fix and re-work a number of parts, so I did.
We of course have some hop ups as always and some of those work for some and some of those do not work for some, but that is why they are option parts of course.
When is the reworks of 2.0 coming out???
02-09-2015, 04:29 PM
#7690
How will it be labeled to tell the difference in the new one and old one?
02-09-2015, 09:00 PM
#7692
Tech Regular
I am saving my cash for the new truck!!!!!! And my 7yr will run my old \ new scte2.0 after the new one is on the bench!!!
But have any of you guys used the 39 tooth MIP spur on short tracks for a little more bottom end??
I don't run tekin stuff I got speed passion and I am looking for just a little more (balls\ guts ) on the bottom end.
But have any of you guys used the 39 tooth MIP spur on short tracks for a little more bottom end??
I don't run tekin stuff I got speed passion and I am looking for just a little more (balls\ guts ) on the bottom end.
02-10-2015, 04:04 AM
#7694
Like Ryan said it's not a new truck just improved on some of the parts quality, and very minor modifications to an already sweet platform. Why would they go to all the trouble for that to make new box art or call it a 3.0...... Hell just throw a sticker on the box or the wrapper and say with improved parts or something.
02-10-2015, 06:06 AM
#7695
I am saving my cash for the new truck!!!!!! And my 7yr will run my old \ new scte2.0 after the new one is on the bench!!!
But have any of you guys used the 39 tooth MIP spur on short tracks for a little more bottom end??
I don't run tekin stuff I got speed passion and I am looking for just a little more (balls\ guts ) on the bottom end.
But have any of you guys used the 39 tooth MIP spur on short tracks for a little more bottom end??
I don't run tekin stuff I got speed passion and I am looking for just a little more (balls\ guts ) on the bottom end.