R/C Tech Forums - Team Associated B4.2 Thread

I am using durbo rod ends not ball cups, they are ALOT tighter get rid of most of the slop, had to shave, the outside of the rod ends used on the front tower, and the steering rack, and depending on your camber placement you may have to obtain different rod ends that are shorter i used some that are 38mm long, for the steering links(using the farthest back hole in the steering rack). On the front camber link i am middle(caster block) and inside (tower). I am using 38mm long ones as well here. For the rear i am using the stocks ones (inside on the hub) and inside on the shaved brace with the c hub

Put the Jconcepts ball cups on the AE ball studs (6 months old) and there was a good amount of slop. Then I put the Jconcepts stainless ball studs on with them and they are dialed -- no slop, zero binding, no popping off when adjusting or driving.

the incubus

10-24-2013 03:02 PM

Quote:

Originally Posted by the incubus (Post 12660701)

Enough MM/RM talk… Anyone know where to buy Andy's RC Mohawk body??!?!?
I've looked everywhere with no luck and I no longer have Facebook and not looking to create another account.

Want to pick one up for my next paint job.

Anyone?

PIIHB!

10-24-2013 03:55 PM

Handle It Hobbies and IERC has them......according to Andy's FB page

PIIHB!

10-24-2013 04:22 PM

I kind of wish Dahm's bodies were back...

the incubus

10-25-2013 07:29 AM

Dahm's and Andy's… 2 of the best ever.

PIIHB!

10-25-2013 07:37 AM

I'm upgrading my steering servo for next season. Currently I'm running an older hitec 625mg servo. I was looking at the standard protek high speed servo and the savox 1258. Any suggestions?

samuelsonmark71

10-25-2013 07:39 AM

Im running the Savox 1258 right now and its fine. I run a cap just in case

xTotalghost

10-25-2013 07:39 AM

Quote:

Originally Posted by PIIHB! (Post 12664898)

I'm upgrading my steering servo for next season. Currently I'm running an older hitec 625mg servo. I was looking at the standard protek high speed servo and the savox 1258. Any suggestions?

Protek130s

Wattsup23

10-25-2013 08:16 AM

Quote:

Originally Posted by xTotalghost (Post 12664901)

Protek130s

+1 or BLS451

Tyler Keel

10-25-2013 08:16 AM

XP 1015 :nod:

TK

Crash Test Dumy

10-25-2013 08:55 AM

Nube ?

Hey Guys,

I've got a used B4 roller coming in the mail (my first 1/0 elec). I'm looking for a combo and wanted to know what Kv I should be looking for in a 10.5?
And is the gearing chart in the manual for a particular Kv?

Thank You
Brian

t0p_sh0tta

10-25-2013 09:18 AM

Don't worry about kV. What brand ESC/motor are you looking at?

Being new to 2WD buggy, the slight difference between motors won't be noticeable.

ChrisAttebery

10-25-2013 11:01 AM

Hi Brian,

Where are you planning to race? NorCal? I'm running a Reedy 10.5 in Mod, most of the fast guys are running 8.5s. I was running 26/78 with that motor and with some timing I had plenty of top end for the short track.

Chris

Quote:

Originally Posted by Crash Test Dumy (Post 12665081)

the incubus

10-25-2013 11:42 AM

Quote:

Originally Posted by PIIHB! (Post 12663073)

Handle It Hobbies and IERC has them......according to Andy's FB page

Thanks but I can't fine a site for them. Need somewhere I can order from if possible.

if any of you know Andy Personally, tell him to come in here because we want more info on his stuff! LOL

turbo2cam

10-25-2013 12:27 PM

Quote:

Originally Posted by the incubus (Post 12662930)

Anyone?

Quote from his FB page...

"Available now The new B4.2 Mohawk by Andy's RC. Get yours today at IERC, Handleit Hobbies and other fine Hobby shops. Also available direct contact [email protected]. $21.99 and includes two Andys HDF wings."

https://www.facebook.com/andysrcsoca...60375374082570

https://www.facebook.com/andysrcsocal

All times are GMT -7. It is currently 04:19 PM.

Page 719 of 850

719

Show 40 post(s) from this thread on one page