FastPete

iTrader: (44)

Ok I'm Joining the club. Mine will be here tomorrow.

I want to order some spare stuff. What's the same between the buggy and this truck?

I ask because nitrohouse shows some buggy parts it looks like under the truck.

And ideas on a high bite indoor clay setup running slicks? At least for diff and shock oils and pistons

Thanks.

justpoet

iTrader: (16)

The easiest way to check this for a specific part is to go to Tekno's website. Each part lists what it is for and in what category. An example of mudguards would be listed like this: EB48 Parts, SCT410 Option Parts

gangstafish

iTrader: (1)

I will also be joining the CLUB. Mine will be here tomorrow also. Anyone want to buy a seriously up graded SCTE ? I think I will keep both for now. Just in case I break something on the Tekno I have a backup.

Cain

iTrader: (294)

I would personally suggest starting with Barry Baker's setup:

http://www.teknorc.com/tekno5/wp-con...Baker_OCRC.pdf

I would pickup stiffer springs to have on hand and be prepared to use higher oil weights, maybe the 1.1mm x 10 pistons could be worth a look too, at least, I am thinking about it lol or maybe some 8 x 1.3mm pistons like my eb48 has.

Foosmatrix

iTrader: (2)

Our thread was at the bottom of the page. I just couldnt let it go to page 2

symmetricon

iTrader: (27)

I tried the Baker setup and it was too aggressive for me. His setup will keep you honest.lol

Kuya_Kimo

iTrader: (90)

+1 with Barry's setup... it's very aggressive and other setups would be easier to drive. If you ask Barry himself, he suggests other people setups over his for faster consistant laps.

Diffs 7f, 5c, 3r was the ticket this past weekend on a real tight slippery track. Maybe Chad might have something for us to peek at...

Cain

iTrader: (294)

interesting. So what is the setup he is suggesting?

FastPete

iTrader: (44)

So these would work for spares?

http://www.nitrohouse.com/Adjustable...8_p_14486.html

And does anyone have any arms?

flraptor07

The SCT410 is here!!! The build has Commenced

FastPete

iTrader: (44)

Pics now!

FastPete

iTrader: (44)

Also wanted to share ordered mine from FPP Hobby great people! And have more in stock. Mine will be here tomorrow. $379.99 with the coupon code.

flraptor07

All I got is the diffs built so far LOL I'll be putting up pics when it's done. I got a body coming from Andy's RC / Warkolors too! Should be badass!

Kuya_Kimo

iTrader: (90)

At 702 raceway this past weekend, he had a modified setup (not exactly sure what).... mainly shock location/oil changes (same diff oils). Chad's truck looked very good with the 7f/5c/3r diffs and same shock locations.

symmetricon

iTrader: (27)

I am going back to the stock setup, except I am gonna run bladders instead of emulsion for more pack.