Team Associated RC8.2e Thread
#6886
Tech Rookie
Thanks a ton for measuring man! Now I can finish this thing up tonight. As far as spacers on the front between the ball stud and tower, I ordered the Rail Shims (ASC8603) which I think is what Cav is using in the images of his front end a few pages back? Do you know if these are correct? I'm just getting back into this after a 25 year hiatus. I'm having a blast building this thing!
#6888
Super Moderator
iTrader: (27)
Thanks a ton for measuring man! Now I can finish this thing up tonight. As far as spacers on the front between the ball stud and tower, I ordered the Rail Shims (ASC8603) which I think is what Cav is using in the images of his front end a few pages back? Do you know if these are correct? I'm just getting back into this after a 25 year hiatus. I'm having a blast building this thing!
http://www.ebay.com/itm/TEAM-ASSOCIA...item58b8833795
The shims you linked would work as well but you would need 3 or 4 on each to space them right. If I recall correctly, the space needs to be 8-9mm off the tower.
#6889
Tech Regular
iTrader: (8)
These are the front: http://www.ebay.com/itm/64-Titanium-...-/221586306144
These are the rear: http://www.ebay.com/itm/64-Titanium-...-/221586330837
The rears are 75mm but they worked for me and still have adjustment available.
Edit: Just noticed my last post. To clarify, the fronts are 55mm and the rear are 70-75mm.
These are the rear: http://www.ebay.com/itm/64-Titanium-...-/221586330837
The rears are 75mm but they worked for me and still have adjustment available.
Edit: Just noticed my last post. To clarify, the fronts are 55mm and the rear are 70-75mm.
#6891
My parts finally arrived from Amain...took 2.5weeks so next time I'll pay for faster freight.
The chassis screws that mount to the alloy chassis braces are too long so I'll need to cut these down. No big deal but I'm surprised that these were not included in the hop up parts I ordered.
I'm keen to get linked to the tekin hotwire. I want to in fact connect it to my android smart phone so looks like I'll need an adapter from usb to micro usb.
I fitted the CF centre plate which looks nice. Do I need to seal the edge as I was told these can laminate?
Lastly, I'm running 4s with 2050kv and 17tooth but want more top end...I've ordered 19tooth and 21tooth so do I guys think 21tooth is a bit ambicious?
The chassis screws that mount to the alloy chassis braces are too long so I'll need to cut these down. No big deal but I'm surprised that these were not included in the hop up parts I ordered.
I'm keen to get linked to the tekin hotwire. I want to in fact connect it to my android smart phone so looks like I'll need an adapter from usb to micro usb.
I fitted the CF centre plate which looks nice. Do I need to seal the edge as I was told these can laminate?
Lastly, I'm running 4s with 2050kv and 17tooth but want more top end...I've ordered 19tooth and 21tooth so do I guys think 21tooth is a bit ambicious?
#6892
Tech Master
iTrader: (51)
Hey guys, I searched in here but didn't see a 100% definite yes/no as to what body fits. I was looking at the Amain black Friday deals and saw they have the high downforce bulldog body and the 2012 bulldog body but only the 2012 bulldog body says for the 8.2e specifically. Does anyone know if the high downforce body will fit or not? Or is the 2012 bulldog the only body that fits the electric platform? I really like the looks of the high downforce body and I know on my Mugen buggy the high downforce fit the e-buggy pretty good.
#6893
My parts finally arrived from Amain...took 2.5weeks so next time I'll pay for faster freight.
The chassis screws that mount to the alloy chassis braces are too long so I'll need to cut these down. No big deal but I'm surprised that these were not included in the hop up parts I ordered.
I'm keen to get linked to the tekin hotwire. I want to in fact connect it to my android smart phone so looks like I'll need an adapter from usb to micro usb.
I fitted the CF centre plate which looks nice. Do I need to seal the edge as I was told these can laminate?
Lastly, I'm running 4s with 2050kv and 17tooth but want more top end...I've ordered 19tooth and 21tooth so do I guys think 21tooth is a bit ambicious?
The chassis screws that mount to the alloy chassis braces are too long so I'll need to cut these down. No big deal but I'm surprised that these were not included in the hop up parts I ordered.
I'm keen to get linked to the tekin hotwire. I want to in fact connect it to my android smart phone so looks like I'll need an adapter from usb to micro usb.
I fitted the CF centre plate which looks nice. Do I need to seal the edge as I was told these can laminate?
Lastly, I'm running 4s with 2050kv and 17tooth but want more top end...I've ordered 19tooth and 21tooth so do I guys think 21tooth is a bit ambicious?
#6894
How do these hold up to 6s??
The reason I'm asking is my friend built one a couple of weeks ago and both times he's run 6s,he's had problems. This last time the front drive shaft bent pretty bad and he had some damage in the diff. Something with the sun or spider gears...not sure.
He might have messed something up with the build, but that's uncertain.
Any upgrades needed??
The reason I'm asking is my friend built one a couple of weeks ago and both times he's run 6s,he's had problems. This last time the front drive shaft bent pretty bad and he had some damage in the diff. Something with the sun or spider gears...not sure.
He might have messed something up with the build, but that's uncertain.
Any upgrades needed??
#6895
Tech Apprentice
iTrader: (6)
How do these hold up to 6s??
The reason I'm asking is my friend built one a couple of weeks ago and both times he's run 6s,he's had problems. This last time the front drive shaft bent pretty bad and he had some damage in the diff. Something with the sun or spider gears...not sure.
He might have messed something up with the build, but that's uncertain.
Any upgrades needed??
The reason I'm asking is my friend built one a couple of weeks ago and both times he's run 6s,he's had problems. This last time the front drive shaft bent pretty bad and he had some damage in the diff. Something with the sun or spider gears...not sure.
He might have messed something up with the build, but that's uncertain.
Any upgrades needed??
#6896
I melted a center diff. Not the best diffs around
#6897
Tech Elite
iTrader: (73)
Hey guys, I searched in here but didn't see a 100% definite yes/no as to what body fits. I was looking at the Amain black Friday deals and saw they have the high downforce bulldog body and the 2012 bulldog body but only the 2012 bulldog body says for the 8.2e specifically. Does anyone know if the high downforce body will fit or not? Or is the 2012 bulldog the only body that fits the electric platform? I really like the looks of the high downforce body and I know on my Mugen buggy the high downforce fit the e-buggy pretty good.
With our Reedy 4600 packs and inboard post terminals its no problem, but with a larger 5200 pack with deans connector we had to trim out a hole in the body.
If its a concern, just go with the 12 Bulldog, it will fit better.
Or, since they're on sale, just get both!
#6898
Can u pls share a link to the above mentioned HD body bulldog 12 body?
Are these available as prepainted?
Is the original j concepts body also available prepainted as my painting skills wouldn't be that good...
Are these available as prepainted?
Is the original j concepts body also available prepainted as my painting skills wouldn't be that good...
#6899
Tech Master
iTrader: (51)
Nick, Gunnar currently runs the HD body on his 8.2e. It will fit fine, however depending on how tall your battery is the front left may hit the outer corner and hold up the body.
With our Reedy 4600 packs and inboard post terminals its no problem, but with a larger 5200 pack with deans connector we had to trim out a hole in the body.
If its a concern, just go with the 12 Bulldog, it will fit better.
Or, since they're on sale, just get both!
With our Reedy 4600 packs and inboard post terminals its no problem, but with a larger 5200 pack with deans connector we had to trim out a hole in the body.
If its a concern, just go with the 12 Bulldog, it will fit better.
Or, since they're on sale, just get both!
#6900
Tech Master
iTrader: (51)
There is the HD Bulldog body. It is discontinued from Proline but they are still available from Amain and others online. And no, they all come clear. Only Bittydesigns offers pre-painted bodies as far as I know