PartTime

iTrader: (10)

I have a carpet track 5 mins from my house. All winter we have had more offroad entries then onroad. There pretty good about putting extra carpet down were needed.

I was having radio problems and couldnt figure out if the speedo was losing voltage or somthing else. now I know its somthing else.

theres a roar minimum weight for foam tired b4? What is legal? 59 oz?

Thanks

DK

terminalpvd

iTrader: (1)

where did you get foams for the b4? seems like a great way of getting more practice

CClay1282

iTrader: (4)

It is not true that a cap is only for 1/12th scale. It is for any four cell(nimh) application.

Not saying he needs one, because he shouldnt. Just stating a fact.

PartTime

iTrader: (10)

A local guys makes them. there pretty easy to make. we use to use 1/10 pan car rear dounts. Cut a tire so you get a front and rear out of one. Grind the inner bead leadge off of the rim but leave the outside one. some contact cement to hold the foam to the rim and then true them up.

Back in the day we used green dot rears. Only $10 to reshoe the car but they only lasted 2 race days. These are some 35 shore 1/8th scale foams. They last almost all season.

DK

Edit: heres a vid of some buggy action at the track I race at. I was in 13.5 truck for this race.
http://www.youtube.com/watch?v=odRNr...eature=channel
13.5 truck amain
http://www.youtube.com/watch?v=fJSh6...eature=channel

mr crum

iTrader: (5)

hey guys first time on this thread i have a b4 and i want to convert it to a t4 wat are the difrences besides arms,links,rear cvds,frontshock tower

thanks in advance

adam lancia

iTrader: (2)

Anyone running the LiPo lite setups notice a ton of bump steer through the suspension range? What is the intent/result of such a setup? Thanks!

SpraydbySprague

iTrader: (64)

For what it's worth, you could score a used T4 in good shape for the cost of buying all the new parts separately to convert.

mr crum

iTrader: (5)

but i already have a b4 to use and i have soe t4 parts already so i was just wonderin wat else i needed

Krio

iTrader: (159)

Not a complete list, but you need the following at the very least:
Chassis $25
Set of arms $13
CVD bones $12
Camber/steeringlinks $10
front and rear towers $13
Front and rear shocks $50
front body mounts $3
Battery strap $5
Body $20

Thats over $150 bucks and you can get a complete used T4 roller for less than that.

BIG RE

iTrader: (33)

anybody?

dangerwr

iTrader: (5)

There were quite a few posts about this topic last week or so. I would go back (or forward?) a couple of pages so you can pick up on it. I think there are a few mods to do . . .

BSchorr

iTrader: (101)

Just run the T4/B4 gear. Its good enough to win the worlds..

PartTime

iTrader: (10)

+1

adam lancia

iTrader: (2)

Anyone.......?

steve eaves

iTrader: (74)

Where is a good place to find b4 set up sheets,i went to Associated's website seen the manulas etc,but could not find what i was needing any help would be appreciated.