3Likeslcg chasis slash 4x4
08-08-2012, 10:51 AM
#811
Tech Regular
They are the same as the regular ones just longer.
http://t-rce.com/shop.html#ecwid:cat...=6&sort=normal
http://t-rce.com/shop.html#ecwid:cat...=6&sort=normal
08-09-2012, 08:33 AM
#812
Saw them running this weekend....they are great if you have had issues with breaking or wearing out pro line arms prematurely. I did not weigh them, but I suspect that they are very similar to the weight of the pro line arms....
Pro-line= More flex
RCE=No flex
For most sc tracks, you will benefit from a stiffer arm more than a flexible arm, although both have their benefits...
I will be using the Mag arms on pretty much every track, because I am not good enough to react to this subtle difference, and I am much more likely to break or bend a plastic arm....
Mine should be here tomorrow...!
Pro-line= More flex
RCE=No flex
For most sc tracks, you will benefit from a stiffer arm more than a flexible arm, although both have their benefits...
I will be using the Mag arms on pretty much every track, because I am not good enough to react to this subtle difference, and I am much more likely to break or bend a plastic arm....
Mine should be here tomorrow...!
08-09-2012, 11:50 AM
#814
Space Coast R.C. Indoor Race Facility. 600-feet in 24sec (SC4x4, 1:8ebuggy & nitro). Opening real soon....
http://spacecoastrc.com/track.html
10-foot wide lanes, 40-foot drivers' stand, 79-indoor trackside pit spots, 5-person clay w/wood framing podium box, 60-gal 240v compressor, tire wash station, A/C'd pro-shop, viewing deck, outdoor deck, outdoor grilling pad, 2-bathrooms, over 50kcfm exhaust fans, comfort fans throughout, and black track perimeter fence sections. A whole lot of fun hard on throttle and brakes and even better trackside experience. 3.5-months of 100% volunteer efforts (with exception of concrete block track wall). Good stage for some epic fast yet controlled racing across all 1:10th and 1:8 classes.
In the middle of final CO-paperwork wrap-up and stuck fulfilling 14-hours of continuing education online for contractor's license renewal (murphy's law). I think I enjoyed drawing the deck-hardware connections in ACAD even more last week.....
http://spacecoastrc.com/track.html
10-foot wide lanes, 40-foot drivers' stand, 79-indoor trackside pit spots, 5-person clay w/wood framing podium box, 60-gal 240v compressor, tire wash station, A/C'd pro-shop, viewing deck, outdoor deck, outdoor grilling pad, 2-bathrooms, over 50kcfm exhaust fans, comfort fans throughout, and black track perimeter fence sections. A whole lot of fun hard on throttle and brakes and even better trackside experience. 3.5-months of 100% volunteer efforts (with exception of concrete block track wall). Good stage for some epic fast yet controlled racing across all 1:10th and 1:8 classes.
In the middle of final CO-paperwork wrap-up and stuck fulfilling 14-hours of continuing education online for contractor's license renewal (murphy's law). I think I enjoyed drawing the deck-hardware connections in ACAD even more last week.....
08-09-2012, 01:38 PM
#815
Space Coast R.C. Indoor Race Facility. 600-feet in 24sec (SC4x4, 1:8ebuggy & nitro). Opening real soon....
http://spacecoastrc.com/track.html
10-foot wide lanes, 40-foot drivers' stand, 79-indoor trackside pit spots, 5-person clay w/wood framing podium box, 60-gal 240v compressor, tire wash station, A/C'd pro-shop, viewing deck, outdoor deck, outdoor grilling pad, 2-bathrooms, over 50kcfm exhaust fans, comfort fans throughout, and black track perimeter fence sections. A whole lot of fun hard on throttle and brakes and even better trackside experience. 3.5-months of 100% volunteer efforts (with exception of concrete block track wall). Good stage for some epic fast yet controlled racing across all 1:10th and 1:8 classes.
In the middle of final CO-paperwork wrap-up and stuck fulfilling 14-hours of continuing education online for contractor's license renewal (murphy's law). I think I enjoyed drawing the deck-hardware connections in ACAD even more last week.....
http://spacecoastrc.com/track.html
10-foot wide lanes, 40-foot drivers' stand, 79-indoor trackside pit spots, 5-person clay w/wood framing podium box, 60-gal 240v compressor, tire wash station, A/C'd pro-shop, viewing deck, outdoor deck, outdoor grilling pad, 2-bathrooms, over 50kcfm exhaust fans, comfort fans throughout, and black track perimeter fence sections. A whole lot of fun hard on throttle and brakes and even better trackside experience. 3.5-months of 100% volunteer efforts (with exception of concrete block track wall). Good stage for some epic fast yet controlled racing across all 1:10th and 1:8 classes.
In the middle of final CO-paperwork wrap-up and stuck fulfilling 14-hours of continuing education online for contractor's license renewal (murphy's law). I think I enjoyed drawing the deck-hardware connections in ACAD even more last week.....
08-09-2012, 10:24 PM
#817
Jeremy.....it's sure going to be fun watching you try to get that 2wd mod buggy turning faster laps than my 4x SC-truck on this one......
toast - I thought the gates of RC-race heaven open up when in California....That would be some honor but will take a long while to recoup from this 3-month pause on life. Gotta get back to focusing on increasing production, finishing components and pre-assembling already. Just cannot wait to attend this experience on a regular race day and then an event/series race day. California definitely has some great track builders though. Some outdoor tracks are just so fast with so many elevation changes.....lucky for the dryness that doesn't let them wash-out without constant maintenance we had to contend with.
toast - I thought the gates of RC-race heaven open up when in California....That would be some honor but will take a long while to recoup from this 3-month pause on life. Gotta get back to focusing on increasing production, finishing components and pre-assembling already. Just cannot wait to attend this experience on a regular race day and then an event/series race day. California definitely has some great track builders though. Some outdoor tracks are just so fast with so many elevation changes.....lucky for the dryness that doesn't let them wash-out without constant maintenance we had to contend with.
08-10-2012, 07:49 AM
#818
I dont have the Link...I am Sure that Punty has it...but I will shoot a pic of them when i get mine....It is still coming back from Nebraska....i will post the pic of my crazy body, too, cause i think that it will need to be retired...some of the paint is coming off of where the marker was applied.
08-10-2012, 08:40 AM
#819
Tech Regular
I already posted the link, Post #811
08-10-2012, 11:29 AM
#821
Tech Regular
08-10-2012, 03:12 PM
#822
Totally random post, but an employee sent me this....imagine popping your SC around this backyard track...Super Dialed!!
http://www.youtube.com/watch?v=6pyvZ...feature=g-vrec
http://www.youtube.com/watch?v=6pyvZ...feature=g-vrec
08-11-2012, 01:34 AM
#823
Im selling my black SSC Chassis in case anyone is interested, it is ready to go as a roller. INLCUDES:
Slash 4x4 UPGRADE Low Center Of Gravity Aluminium Chassis with balck teflon Coating.
Slash 4x4 Aluminium Casterblocks.
Slash 4x4 Bulkheads, Shock Towers, Arms, Turnbuckles Front, Center, and Rear Diffs.
Slash 4x4 Sway Bars
RPM Front and Rear Bumpers with Mud Flaps
TEKNO RC Metal DriveShafts UPGRADE KIT.
LOCATED IN MIAMI FL
https://post.craigslist.org/manage/3197844905
https://post.craigslist.org/manage/3197844905
Slash 4x4 UPGRADE Low Center Of Gravity Aluminium Chassis with balck teflon Coating.
Slash 4x4 Aluminium Casterblocks.
Slash 4x4 Bulkheads, Shock Towers, Arms, Turnbuckles Front, Center, and Rear Diffs.
Slash 4x4 Sway Bars
RPM Front and Rear Bumpers with Mud Flaps
TEKNO RC Metal DriveShafts UPGRADE KIT.
LOCATED IN MIAMI FL
https://post.craigslist.org/manage/3197844905
https://post.craigslist.org/manage/3197844905
08-13-2012, 07:24 AM
#824
Im selling my black SSC Chassis in case anyone is interested, it is ready to go as a roller. INLCUDES:
Slash 4x4 UPGRADE Low Center Of Gravity Aluminium Chassis with balck teflon Coating.
Slash 4x4 Aluminium Casterblocks.
Slash 4x4 Bulkheads, Shock Towers, Arms, Turnbuckles Front, Center, and Rear Diffs.
Slash 4x4 Sway Bars
RPM Front and Rear Bumpers with Mud Flaps
TEKNO RC Metal DriveShafts UPGRADE KIT.
LOCATED IN MIAMI FL
https://post.craigslist.org/manage/3197844905
https://post.craigslist.org/manage/3197844905
Slash 4x4 UPGRADE Low Center Of Gravity Aluminium Chassis with balck teflon Coating.
Slash 4x4 Aluminium Casterblocks.
Slash 4x4 Bulkheads, Shock Towers, Arms, Turnbuckles Front, Center, and Rear Diffs.
Slash 4x4 Sway Bars
RPM Front and Rear Bumpers with Mud Flaps
TEKNO RC Metal DriveShafts UPGRADE KIT.
LOCATED IN MIAMI FL
https://post.craigslist.org/manage/3197844905
https://post.craigslist.org/manage/3197844905
08-15-2012, 10:29 PM
#825
Closest highest-speed racing I've experienced so far with a Groove that's delivering more bite every race day.....
http://youtu.be/4AanjJS4GC4
We even positioned the poles/fence-line so it's ride-able (2x's already). With 2' feet of plexiglass still to come.
http://youtu.be/4AanjJS4GC4
We even positioned the poles/fence-line so it's ride-able (2x's already). With 2' feet of plexiglass still to come.