R/C Tech Forums - SC10 4x4 Thread

Ok I'm going to go ahead and order the clutch basket and garodisc. I put them together? Is the clutch basket difficult to assemble? Order from here right?

http://gearrings.weebly.com/rc-racing-stuff.html

Then the garodisc..

http://rcshox.com/shoxshop/catalog/p...c4af386b5bedca

can i use my visa card with pay pal on them sites for some parts. thank you

Resqnu

01-09-2012 01:56 PM

Quote:

Originally Posted by Steve737 (Post 10146043)

60 tooth spur. 13, 14, and 15 tooth pinion. I run on a small indoor track and use the 15 with no problems.

Quote:

Originally Posted by LouDawg (Post 10146087)

Im running 62/14 with my pro4 4000kv in small/medium indoor clay track. I hit 160s after a 6min main

13, 14, 15 is a great start

Thanks, my kit came with a 62T and 93T. I will get the 13,14,15 pinions for the 62T.
Can someone explain why the 62T is preferred as the manual says 62T is for 550 motors and 93T is for 540 motors?

murky123

01-09-2012 02:04 PM

[QUOTE=buckeyeboy30;10145705]

Quote:

Originally Posted by murky123 (Post 10145635)

and when you do it this way, you will still be able to use the AE underbody / overtray

Is this right?

[IMG]http://i42.tinypic.com/1qfkhf.jpg[/IMG]

perfect

Keyrigger

01-09-2012 02:06 PM

Quote:

Originally Posted by murky123 (Post 10145098)

I want to know how the Reedy Sonic 550 is.

you hear so little about this motor. why?

I think that the AE Team are running the Reedy motors, not the shorter 4 Poles, at least they were the last time I looked at their setup sheets. I know that the LRP SXX V.2 seems to be the choice of ESC for one of them, though.

Don

Nyk	01-09-2012 02:15 PM

Quote:

Originally Posted by Wild Cherry (Post 10145817)

Pacific N/w Shoot Out layout is easy , no big jumps or whatever ..

But ....
Its real hard to go fast on & be consistent , demands the best skills you have ...

What kind of slipper set up?

Misfit138

01-09-2012 02:20 PM

Quote:

Originally Posted by nickfin91 (Post 10145440)

no, i think im going to try the turnigy nano tech 65-130c ones from hobby king

I bought all the parts to convert it to saddles, now i just need saddles :p

I'm doing the same. I just ordered those batteries today.

Chad Smith

01-09-2012 02:28 PM

Quote:

Originally Posted by vito (Post 10146102)

can i use my visa card with pay pal on them sites for some parts. thank you

Yes that is what PayPal is. You use your mastercard,visa card etc to buy things.

Chad Smith

01-09-2012 02:29 PM

Quote:

Originally Posted by Misfit138 (Post 10146239)

I'm doing the same. I just ordered those batteries today.

Let me know how those saddles work. I might have to pick some up.

Chad Smith

01-09-2012 02:43 PM

[QUOTE=buckeyeboy30;10145705]

Quote:

Originally Posted by murky123 (Post 10145635)

and when you do it this way, you will still be able to use the AE underbody / overtray

Is this right?

[IMG]http://i42.tinypic.com/1qfkhf.jpg[/IMG]

Yes but to make sure do you have a locknut on the other end of the screw?

vito	01-09-2012 03:56 PM

ok i found my motor a cc 3800 4 pole and where to start out with gearing?

SCTDan

01-09-2012 04:07 PM

Quote:

Originally Posted by Resqnu (Post 10146124)

Thanks, my kit came with a 62T and 93T. I will get the 13,14,15 pinions for the 62T.
Can someone explain why the 62T is preferred as the manual says 62T is for 550 motors and 93T is for 540 motors?

The 62 is 32 pitch and holds up better under heavy power.

Mizchief

01-09-2012 04:30 PM

I got my dual stage pistons and center diff in today!

I think I'm going to try 10k in the front diff, 5 in the rear, then 30wt in the front shocks, but then my next size oil is 25. Is 25 too light for the rear? I was thinking about mixing up some 27 using 20 and 35 (since I don't have much 30 left)

The races I care about are on 1/8 scale hard pack clay mostly smooth with a little dust on top depending on how late it is in the evening. However I also do some indoor carpet racing, mostly just screwing around.

All times are GMT -7. It is currently 04:41 PM.

Page 968 of 2433

968

Show 40 post(s) from this thread on one page