|
Im really debating on which motor to put in mine, please help me out. :confused:
Tekin 4.5, Ballistic 4.5, Castle 1410 or 1415. I will mostly run on some what large outdoor meduim to low traction tracks and occasionally an Indoor high traction track. Thanks for any comments. |
If all goes well I will be getting my kit tomorrow. Can't wait to start the build
|
Originally Posted by Jstall7543
(Post 9086774)
I love the box! Very cool!
|
Originally Posted by Gas Rat Racin
(Post 9087304)
Im really debating on which motor to put in mine, please help me out. :confused:
Tekin 4.5, Ballistic 4.5, Castle 1410 or 1415. I will mostly run on some what large outdoor meduim to low traction tracks and occasionally an Indoor high traction track. Thanks for any comments. |
Well, I got mine today from the big brown truck. Started sorting everything out. Then building. Pulled the diffs apart to check the fluid level as it had been mentioned of low levels of fluid. Mine was low too. Everything was smooth as could be until I got to the outer rear hinge pins. One has threads and the other is smooth as silk. (no threads cut) just wanted to share for QC purposes.
|
going to be building my truck tonight with the ds1015 servo and castle 3800kv motor and mmp. Testing will go down tomorrow at outback raceway in chico. Ill give some feedback asap since this seems to be the popular choices on electronics.
|
Originally Posted by Keeferton
(Post 9087455)
going to be building my truck tonight with the ds1015 servo and castle 3800kv motor and mmp. Testing will go down tomorrow at outback raceway in chico. Ill give some feedback asap since this seems to be the popular choices on electronics.
|
I got my 4x4 today!
I sat there waiting for the ups guy he jumps out with a big box that says 'sc10 4x4' on it and opened it up 4 perfect kits in it! Got mine opened it up took a look I'm so stoked for the build:) Sold 3 still have one left here at hp chino hills! |
48 pitch what spur 3800 castle
:D:D
Originally Posted by rabbiter
(Post 9087550)
I got my 4x4 today!
I sat there waiting for the ups guy he jumps out with a big box that says 'sc10 4x4' on it and opened it up 4 perfect kits in it! Got mine opened it up took a look I'm so stoked for the build:) Sold 3 still have one left here at hp chino hills! |
which servo will come with a long enough wire to go into the receiver box. I've learned the hardway not to have my receiver protected from the elements.
I dont know why but i'm not a fan of running an extension wire, i feel i'll lose voltage lol. :lol: I want to run that xp1015 servo. I'm willing to spend up to 100 bananas. I want something with at least 200 in oz and pretty fast. |
Originally Posted by turbowop
(Post 9087259)
Nevermind, spoke too soon. Got home from work and saw that the backorders are in stock and ready to ship. Truck is now on its way.
|
This is excelent info. Thanks. This can help me get the slash working better
untill I get my sc104x4 also I say that with the 1410 motor you will see a 18 tooth pinion when using the fan
Originally Posted by Chris Jarosz
(Post 9086323)
The 60K was definitely not a typo. I have actually been running 60K for the past couple weeks in my truck and have been extremely happy with it.
The thick front diff fluid mellows out the truck quite a bit on high speed sweeping turns as well as allows you to be able to run a "bar" type tire in the front, such as Suburbs, Barcodes, etc. With the 10K front diff oil, the Suburbs would be extremely fast through the infield but way too aggressive in sweepers. So much that if you turned the wheel just a bit too far that the truck would want to spin out or traction roll. After I changed the fluid I could drive the truck harder into the sweepers without fear of it rolling or spinning, and then to make up the steering in the infield I switched to the more aggressive Suburb tire instead of Holeshots. Over all I think it was a great change and I am super happy with how my truck handled in qualifying as well as even the main event! |
The "ultimate" servo would be Hitec 7940TH straight w/ 2S lipo through it :).
Honestly, having had extensions up to 6 ft on some of my projects in the past, 1 measly extension won't change much. |
HELP!!
For anyone thats built their kit yet was the part (asc91004) the inner body mount that attached to the top part where you install the servo horn in BAG A? I can't freaking find it and I searched through the other bags (didn't open them just looked through) So for those that have built it, was that part in another bag?
|
Originally Posted by ilanstylz
(Post 9087965)
For anyone thats built their kit yet was the part (asc91004) the inner body mount that attached to the top part where you install the servo horn in BAG A? I can't freaking find it and I searched through the other bags (didn't open them just looked through) So for those that have built it, was that part in another bag?
|
| All times are GMT -7. It is currently 04:57 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.