Durango DEX210 Thread
It tells you if you use the standard HRC block or the -2mm LRC block with the different inserts gives you different settings. But even with the HRC block you can't get the same 0, 1.5 and 3 settings. It ends up being 0.7, 1.8, and 2+ something. I can;t really remember as I don't have the paper in front of me.
That was the problem. He doesn't have the instructions as he bought it used.
I would've thought somebody would've posted it online somewhere. It would be helpful if somebody could do that.
Tech Champion
iTrader: (15)
Just got the B5 Rear wheel hexs there is one problem it seems i will need to add at least two more of the axle shims behind the hex with the two on the inside of the axles there isn't a good lip on one side to take up the play . It has quite a bit of play !
Might of better better off getting the B4.1 Rear hexs since it has a bigger lip on one side of the hex like the Durango stock ones.
So il need to buy some extra shims or just get the Proline B4.1 Rear hexs.
Might of better better off getting the B4.1 Rear hexs since it has a bigger lip on one side of the hex like the Durango stock ones.
So il need to buy some extra shims or just get the Proline B4.1 Rear hexs.
Durango HQ has asked Exotek to develop 12mm hexes and these are looking great so far. Durango have given us the thumbs up on samples so we will have 12mm hexes released early Jan!
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Tech Initiate
iTrader: (1)
Durango HQ has asked Exotek to develop 12mm hexes and these are looking great so far. Durango have given us the thumbs up on samples so we will have 12mm hexes released early Jan!
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Tech Champion
iTrader: (15)
Durango HQ has asked Exotek to develop 12mm hexes and these are looking great so far. Durango have given us the thumbs up on samples so we will have 12mm hexes released early Jan!
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Nice !
Durango HQ has asked Exotek to develop 12mm hexes and these are looking great so far. Durango have given us the thumbs up on samples so we will have 12mm hexes released early Jan!
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Exotek has been working in cooperation with Team Durango to release other 210 updates for the line as well so stay tuned! Some interesting pieces are in the works
Tech Elite
iTrader: (10)
Sadly I don't think there is much that can be done about it. The cost of shipping just keeps going up. Crossing a border just adds to the expense.
Tech Elite
iTrader: (10)
There only shipping option is a fast one, they should be able to ship stuff first class mail for cheap when you need 1 or 2 parts easily
Tech Champion
iTrader: (15)
It depends on weight and value but to Canada our postage rate starts at $7.99. We were finally given this lower option a few months ago for online postage. Before that we were only given much more expensive choices which was a lose lose situation for us both but finally that has changed.
Tech Champion
iTrader: (15)
Hey guys, I just picked up a v2 and I hope I'm putting this in the right place. I'm looking to see if you guys can tell me what the must haves and the must do's to this car might be? Any help is appreciated.
Only thing that is a must have really is the Alum battery hold thumb screws. Must dos i say if your using the stock springs go up in weight like 32/30w a gear diff if you want that and over time do get the alum Front Rear suspension block .
The rest is extra springs , tires , Spur gear.