Durango DEX210 Thread
Tech Master
iTrader: (38)
what gear should I be running in 17.5...69 spur?
what spring set for the front? Hard or regular?
what spring set for the front? Hard or regular?
Tech Elite
iTrader: (39)
http://www.amain.com/Schumacher-Raci...ar-83T/p170698
Tech Elite
iTrader: (39)
I'd just start wth a 71t Schumacher spur or an RPM spur with an Exotek slipper eliminator and get a nice set of aluminum pinions from 30-38t then spend a few packs rounding your local track, changing gears and checking temps. :-)
Tech Master
iTrader: (1)
Thanks Ebbtide!
Tech Master
iTrader: (1)
Tech Master
iTrader: (38)
copy that....60$ is springs....sigh
Tech Legend
iTrader: (294)
lol. man some of these spur gear prices are up there. wonder if there is gold hidden in em
Tech Master
iTrader: (1)
If you wanted to buy individuals you'll probably want to go with a set of springs that are one increment stiffer and one increment softer on each side to start with. Along with moving the shock positions around that should give you a good range of adjustment to start with.
Tech Master
iTrader: (38)
I suppose I'll be putting another order in after the car arrives! LOL
Thanks for the tips all...More to follow, I'm sure.
Thanks for the tips all...More to follow, I'm sure.
I am putting together a ball diff for my DEST. the diff feels like it is rubbing against the gearbox. When I install the spur gear, I can feel certain spots where it is free and where there is excess binding. Anyone have an idea of what may be going on?
The gearboxes my DEX and DESCl go together no problem, but I bought them used. Wondering if there could be user error I am doing.
The gearboxes my DEX and DESCl go together no problem, but I bought them used. Wondering if there could be user error I am doing.
You don't really need the whole set.
Kit comes with:
V1 (Light Blue Front / Light Blue Rear)
V2 (Black front / Light Blue Rear)
excluding the springs that come with your kit....
TD Progressive Springs that you should get:
Front: Light Blue, Black, Light Red, Dark Green
Rear: Black, Dark Green
You will never use springs lighter than light blue. Unless you race on hardwood or in a gym floor.
Another thing you might want to consider is a Linear Set:
TLR Low frequency TLR22 front and rear springs set.
Kit comes with:
V1 (Light Blue Front / Light Blue Rear)
V2 (Black front / Light Blue Rear)
excluding the springs that come with your kit....
TD Progressive Springs that you should get:
Front: Light Blue, Black, Light Red, Dark Green
Rear: Black, Dark Green
You will never use springs lighter than light blue. Unless you race on hardwood or in a gym floor.
Another thing you might want to consider is a Linear Set:
TLR Low frequency TLR22 front and rear springs set.
Last edited by Dino_D; 09-26-2014 at 11:27 AM.
Tech Elite
iTrader: (39)
I am putting together a ball diff for my DEST. the diff feels like it is rubbing against the gearbox. When I install the spur gear, I can feel certain spots where it is free and where there is excess binding. Anyone have an idea of what may be going on?
The gearboxes my DEX and DESCl go together no problem, but I bought them used. Wondering if there could be user error I am doing.
The gearboxes my DEX and DESCl go together no problem, but I bought them used. Wondering if there could be user error I am doing.
The new one caused the gears to bind when I attached the motor plate to the gearbox. The only way to prevent the binding on my old gearbox was to use red thread-lock and just leave the screws for the motor plate almost finger-tight instead of cranking it down with the hex drivers. That got rid of the majority of binding for me.
But what got rid of ALL of the binding for me was switching over to the type-b gearbox and chassis for the DEX210. Now I can crank all of the screws down and not worry about binding.
Tech Master
iTrader: (1)
I've also experienced these types of issues with my gearbox. Sometimes the binding is caused by using the wrong size spacer in between the motor plate and gearbox. This makes the plate tilt a bit. This is one of the reasons I like the tresrey motor plate it comes with a spacer that screws into it so you can't lose it.
This is building a brand new kit, there should be no wear. Even without the screws, just by completing the two halves there is binding. This is before a motor plate or anything comes into play.
My kit has a number of type b items, the chassis for sure. Could I be dealing with a type a gearbox?
My kit has a number of type b items, the chassis for sure. Could I be dealing with a type a gearbox?
Tech Elite
iTrader: (39)
This is building a brand new kit, there should be no wear. Even without the screws, just by completing the two halves there is binding. This is before a motor plate or anything comes into play.
My kit has a number of type b items, the chassis for sure. Could I be dealing with a type a gearbox?
My kit has a number of type b items, the chassis for sure. Could I be dealing with a type a gearbox?
I've had brand new gearboxes create binding in the drivetrain before, so it doesn't need to be worn to cause binding. The issue is with the plastic and the mold they used for the old gearboxes. They had a tendency to warp easily which caused the binding.
If you can confirm that you do have a Type B gearbox and still experience binding, then I'd start to check all of the gears to see if there are any chips or deformities in the teeth of the idler, and diff gear