Durango DEX210 Thread
Tech Champion
iTrader: (12)
Tech Regular
iTrader: (5)
Dex210 Motor cooling fan
So I didn't see info on how to mount a cooling fan.
So using a longer counter sunk screw for lower shock tower mount and the excess thread on the other side holds onto a 25mm fan.
Have not raced yet with it so it might die quickly from a rock but it clear's the shocks and body etc I also added a wind deflector to streamline the air.
So using a longer counter sunk screw for lower shock tower mount and the excess thread on the other side holds onto a 25mm fan.
Have not raced yet with it so it might die quickly from a rock but it clear's the shocks and body etc I also added a wind deflector to streamline the air.
Tech Fanatic
iTrader: (18)
Nice cooling set up Pittster, reminds me of the Brabham F1 'fan car'
Tech Addict
The v2 side pots will not fit, because the v2 chassis is 8mm longer, than the v1.
To all those using a carbon rear tower do you space it out 1mm from the gearbox?
Tech Master
iTrader: (4)
Hi all just building a v2 as mid mount and was just wondering was is better....4 gear or 3 gear ?
cheers
cheers
Tech Master
iTrader: (1)
Hi TTim: 3 gear and 4 gear both have there place depending on what you want to achieve. Personally I prefer 4 gear most of the time but this is mostly due to the tracks I usually run on. I run at OCRC and SCVRC here in Southern California and the surface is a nice high grip clay indoors. So traction is pretty consistent. As with anything it's best to try it to see how it feels to you and notice how it makes the car different.
A couple of very general notes about the differences in handling:
MM4: The car will respond to throttle and braking much more than with a 3 gear setup. This is due to the rotation of the wheels and transmission and there relationship in terms of direction. The car will transfer weight to the rear on throttle and on braking transfer weight to the front.
MM3: The car tends to drive flatter and respond much less to throttle and braking. Same reasoning here. The direction of torque on the motor versus the wheels and transmission, these are the two largest inertial bodies interacting with the car.
I've found this to be very helpful, especially the diagrams.
http://www.team-durango.com/blog/201...onfigurations/
I've found an easy way to see and understand this is to hold the car ready to run and give it throttle and brake and see how the car wants to nose up on throttle and nose down again when you hit the brakes. Switching to MM3 will lessen this effect. Hope that helps!
A couple of very general notes about the differences in handling:
MM4: The car will respond to throttle and braking much more than with a 3 gear setup. This is due to the rotation of the wheels and transmission and there relationship in terms of direction. The car will transfer weight to the rear on throttle and on braking transfer weight to the front.
MM3: The car tends to drive flatter and respond much less to throttle and braking. Same reasoning here. The direction of torque on the motor versus the wheels and transmission, these are the two largest inertial bodies interacting with the car.
I've found this to be very helpful, especially the diagrams.
http://www.team-durango.com/blog/201...onfigurations/
I've found an easy way to see and understand this is to hold the car ready to run and give it throttle and brake and see how the car wants to nose up on throttle and nose down again when you hit the brakes. Switching to MM3 will lessen this effect. Hope that helps!
Last edited by 13Maschine; 09-07-2014 at 04:25 PM.
Thanks 13Maschine.
Tech Master
iTrader: (1)
Definitely, I'm sure some of the other guys here will jump in a bit eventually too. Tell us about the track that you run on and how you make out, I'll do my best to help you get dialed!
TTim,
The website Durango Fansite is a great resource. If you go to tips it brings up several durango blogs that aid in assembly.
The website Durango Fansite is a great resource. If you go to tips it brings up several durango blogs that aid in assembly.
ok thanks everyone for your help.
Tech Master
iTrader: (1)
Has anyone run the Exotek Graphite chassis? Comments, love it, hate it etc. Thanks!
Dave
Dave
Tech Elite
iTrader: (10)
it looks pretty
Tech Regular
You want 4 gear for mid motor!