Losi 1/8 8ight E 4wd Thread
#7654
#7656
I have a friend at the track who has a Losi RTR Eight-E 2.0 for sale. He wants 600 for it and comes with a motor/esc combo already inside.
Im wondering, is this combo sensored? Is it good quality? Is the buggy the same as the race roller I would buy without the esc/motor combo?
I just dont want to get a RTR and have the parts be less then the race roller. I dont mind paying a little extra for the ESC/Motor combo, I have my own I will put into it.
But I bought a Kyosho RTR and it was junk.
So if anyone knows about these RTR's just let me know please.
Thanks.
Im wondering, is this combo sensored? Is it good quality? Is the buggy the same as the race roller I would buy without the esc/motor combo?
I just dont want to get a RTR and have the parts be less then the race roller. I dont mind paying a little extra for the ESC/Motor combo, I have my own I will put into it.
But I bought a Kyosho RTR and it was junk.
So if anyone knows about these RTR's just let me know please.
Thanks.
#7658
Its never touched the floor, its clean as a whistle. Its got this Xceleron 2100kv motor, with a programmable ESC. I just dont see any reviews on this esc and motor.
From what Im reading on the Losi website its the 8ight-E 2.0 Race Roller with there electronics in it. Just need a reciever and servo and go.
Im just trying to figure out if its REALLY the race roller. The last time I bought a RTR I was kinda screwed on it.
http://www.losi.com/Products/Default...rodID=LOSA0806
Last edited by Ironwolf1974; 06-19-2012 at 08:58 PM. Reason: Putting in a web link
#7659
Tech Elite
iTrader: (5)
He took it out of box, looked at it, hes like 65 or so. He bought it thinking his friends would buy an 1/8 also, but decided to stick to SCT.
Its never touched the floor, its clean as a whistle. Its got this Xceleron 2100kv motor, with a programmable ESC. I just dont see any reviews on this esc and motor.
From what Im reading on the Losi website its the 8ight-E 2.0 Race Roller with there electronics in it. Just need a reciever and servo and go.
Im just trying to figure out if its REALLY the race roller. The last time I bought a RTR I was kinda screwed on it.
http://www.losi.com/Products/Default...rodID=LOSA0806
Its never touched the floor, its clean as a whistle. Its got this Xceleron 2100kv motor, with a programmable ESC. I just dont see any reviews on this esc and motor.
From what Im reading on the Losi website its the 8ight-E 2.0 Race Roller with there electronics in it. Just need a reciever and servo and go.
Im just trying to figure out if its REALLY the race roller. The last time I bought a RTR I was kinda screwed on it.
http://www.losi.com/Products/Default...rodID=LOSA0806
A couple other things: The "kit" tires from Losi will come unglued fairly easy. Also they often press on the shock ends instead of taking the time to properly screw them on during assembly. Lastly there is no telling what they used for shock fluid--go ahead and change the fluids. The 2100Kv is quite a bit of motor so keep an eye on temps . . .
#7660
Understood. This is the Losi race roller which is a bit better quality than the Nitro RTR that uses blue or red anno for the aluminum bits. I say it is worth the $600. I do not think the Losi Xcelorin stuff is too bad but is not the choice of most racers but is fine to get you started. Like any pre-built kit you want to go through and make sure there is Loctite on any screws that are not threaded into plastic.
A couple other things: The "kit" tires from Losi will come unglued fairly easy. Also they often press on the shock ends instead of taking the time to properly screw them on during assembly. Lastly there is no telling what they used for shock fluid--go ahead and change the fluids. The 2100Kv is quite a bit of motor so keep an eye on temps . . .
A couple other things: The "kit" tires from Losi will come unglued fairly easy. Also they often press on the shock ends instead of taking the time to properly screw them on during assembly. Lastly there is no telling what they used for shock fluid--go ahead and change the fluids. The 2100Kv is quite a bit of motor so keep an eye on temps . . .
I have a RX8 and a 2050kv motor I bought to put into my Kyosho Inferno VE RTR, but I just put that in my junkyard. I love my lose SCTE so getting this buggy will keep me in the Losi family!
#7663
Tech Addict
Thanks black star.Im gonna grab one of those 60c 5200mah to try out when they arrive.