x60 truck
#407
#408
#410
Tech Elite
iTrader: (14)
i was try to figure out whos ,, who`s on the thread
last night at marcca i tried some different thing on the x-60 the front shock
i tried 2 piston with 3 limiter and 32.5 oil gold spring shock tower top mid. bottom out side on arm
on the rear i layed the shocks down on the rear shock tower inside hole and on rear arm 3 hole
the rear shocks nu 2 piston 32.5 oil 3 limiter and green spring
i started 3rd in the b main got 32 lap won the b-main bump to the a main start in the 10 finish 8th
last night at marcca i tried some different thing on the x-60 the front shock
i tried 2 piston with 3 limiter and 32.5 oil gold spring shock tower top mid. bottom out side on arm
on the rear i layed the shocks down on the rear shock tower inside hole and on rear arm 3 hole
the rear shocks nu 2 piston 32.5 oil 3 limiter and green spring
i started 3rd in the b main got 32 lap won the b-main bump to the a main start in the 10 finish 8th
#411
Tech Apprentice
Paul can we get a copy of Kinwald's x-60 setup that he used this year at the Cactus? Also, why has he not run 4wd at the last few big races?
#412
Gone Banana`z Racing Skins are awsome. With these and the X-60 truck I raced on my third different surface in the last month. With a few small changes My X-60 was dialed. The driver made to many mistakes and did not qvery well in qualifying. Started third in the A-main and lead for half of it before making a bobble. Ended up second in the end.
Thanks again to Gone Banana for the tires. Have you tried them on asphalt yet?
Thanks again to Gone Banana for the tires. Have you tried them on asphalt yet?
#414
This past weekend my break from racing showed. I had a pushing issue that would not go away. I am running a 13.5 class and the kit setup for AE shocks. The truck would turn in good but would push in sweepers and other on power areas. The track surface is a indoor clay, top soil mix. It is high bite. I think the problem is to much rear traction. I was running the J Concepts Bar-codes in gold compound With the big Y to the inside on all four corners. What can I do to increase the on power steering?
#416
Tech Adept
#417
Tech Elite
iTrader: (14)
update on my x-60 i took the t4 shock off my x-60 and put losi shock on and what improvement it made i race indoor offroad carpet i think the losi shock are what the x-60 was made for last night i was jumping a 16 foot table all night long and making it everytime everyone else was landing on top and then drive off it
now the indoor carpet is about done until fall i think i`m going to race it outdoor with slashes to work on my dirt racing outside
it pretty cool to having a truck that is working
now the indoor carpet is about done until fall i think i`m going to race it outdoor with slashes to work on my dirt racing outside
it pretty cool to having a truck that is working
#418
Tech Elite
iTrader: (14)
guy it does not matter how the body are mounted as long it work for you
my son & i bought 4 body the first crack out in the back so being maintenance man i did something different to make them last longer if it right or wrong i do not know i`m still happy with the x-60 i love it more with losi shock on it