|
Thanks... im due for new bodies...
Originally Posted by J_P
(Post 12590152)
It should be soon. It was a rush job to get it finished by the Worlds. Now give it time to get back to normal, give it the finishing touches and it will be released. Probably within a few weeks. The number will be #0266
|
ETA on JC front hinge pin brace for B4? Thanks!
|
Originally Posted by aeMatt
(Post 12591189)
ETA on JC front hinge pin brace for B4? Thanks!
?!?! pics? links? I do have a suggestion for a new part for the b44. An aluminum or carbon fiber or reinforced version of the rear chassis plate (9726). The problem is this piece flexes & causes the lower transmision case (9733) to crack at the front mounting screws. |
2 Attachment(s)
Waflet:
Here are a couple pictures... |
Originally Posted by Waflet
(Post 12591341)
Hideeho
I do have a suggestion for a new part for the b44. An aluminum or carbon fiber or reinforced version of the rear chassis plate (9726). The problem is this piece flexes & causes the lower transmision case (9733) to crack at the front mounting screws. So far no issues for me, but I would throw a strengthened part in to avoid a future issue. And if I added in the JC wing mount I could probably run 1/4 ballast for my setup instead of 1/2 and have the same tune with more strength :tire: |
i understand there is not a firm release date for the c4.2 parts that were in proto at worlds but ya gotta know the market is hungry.....
R |
Originally Posted by aeMatt
(Post 12591930)
Waflet:
Here are a couple pictures... |
Originally Posted by aeMatt
(Post 12591930)
Waflet:
Here are a couple pictures... HA Ha!? I've seen both of those pics, but was so stuck looking at the cf goodies I missed the front brace:sweat:.
Originally Posted by fq06
(Post 12592136)
Yeah, I have seen a bunch of people in the 44.2 thread with cva's popping out and other issues because the lower rear diff case broke and they didn't know it cuz it's so hidden.
So far no issues for me, but I would throw a strengthened part in to avoid a future issue. And if I added in the JC wing mount I could probably run 1/4 ballast for my setup instead of 1/2 and have the same tune with more strength :tire: |
Any word on the Silencer bodies for e-buggys?
Or does anyone know if the Silencer bodies for the Mugen nitro will fit the Mugen eco's? I know most nitro bodies are a tight fit around the battery on an e-buggy but the shape of the Silencer looks like it would be a real close fit. |
I didn't look to hard but is there a finnisher for the 8ight 3.0 E planned at all?
Thanks |
Originally Posted by Waflet
(Post 12593550)
Hideeho
HA Ha!? I've seen both of those pics, but was so stuck looking at the cf goodies I missed the front brace:sweat:. It's not a huge issue, but all it takes is landing rear 1st & bottoming once & the case is cracked. I broke a couple of them in quick succession when I 1st got the buggy:blush:. Now I go to lengths to try to land nose slightly down & no real problems since. It would be AWEFULLY nice to have that piece of mind though. |
what shock tower is that?
|
Does jconcepts will do custom paint jobs? I know that option used to be on the site but i didnt see it last time i looked, when i say used to i mean 5-6 years ago lol
|
hey guys i havent looked through the entire thread but what EXACT characteristics does the front stabilizing wing give and take away
|
Hey Paul, Any chance you will have the new B4 motor plates on the trailer this weekend at Regionals?
|
| All times are GMT -7. It is currently 09:10 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.