R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)
-   -   JConcepts Thread (https://www.rctech.net/forum/electric-off-road/152787-jconcepts-thread.html)

PW 06-01-2011 12:43 PM


Originally Posted by Jmuck69 (Post 9196186)
Will the V2 Barcodes be produces in the Orange compounds?

Yes

Jonny5 06-01-2011 01:12 PM

Just got a new set of Goosebumps and noticed some changes- the rubber looks different ( shiny as opposed to dull) and feels a bit stickier. Also the foams feel softer- was there a running change in them? I did always feel that the cc foams were a bit too firm.

PW 06-01-2011 01:20 PM


Originally Posted by Jonny5 (Post 9196427)
Just got a new set of Goosebumps and noticed some changes- the rubber looks different ( shiny as opposed to dull) and feels a bit stickier. Also the foams feel softer- was there a running change in them? I did always feel that the cc foams were a bit too firm.

The new insert is softer and they did make some type of change so that the rubber comes out much cleaner (still the same rubber compound though).

mxracer458 06-01-2011 02:03 PM

Rt5 punished body?

PW 06-01-2011 02:44 PM


Originally Posted by mxracer458 (Post 9196620)
Rt5 punished body?

Not at this time.

20 SMOKE 06-01-2011 06:38 PM

Paul,what tires will work for the regions at the asylum,barcodes,subcultures or DD's.for SCT.I've never been there and need to buy tires for the event

seth556 06-01-2011 06:46 PM

Green DD's in the rear and ether DD's or grooveys in the front.

salvaticustomjs 06-05-2011 10:07 AM

Paul are you guys gonna make rulux wheels for the 22?

PW 06-05-2011 10:17 AM


Originally Posted by salvaticustomjs (Post 9212178)
Paul are you guys gonna make rulux wheels for the 22?

I'm not sure what the plans are; but I believe we have something in the works.

salvaticustomjs 06-05-2011 10:22 AM

Cool! Thanks for the fast reply pw

20 SMOKE 06-08-2011 06:10 PM

will a mini SC body fit a rc18t

ShaunMac 06-08-2011 07:02 PM


Originally Posted by PW (Post 9196457)
The new insert is softer and they did make some type of change so that the rubber comes out much cleaner (still the same rubber compound though).

Why was the new 1/10 And1 insert made even softer?

CCristo 06-08-2011 07:06 PM

Paul is talking about the closed cell foam being softer, not the AND1s.

PW 06-09-2011 05:56 AM


Originally Posted by 20 SMOKE (Post 9229040)
will a mini SC body fit a rc18t

I don't know; it's made for the mini slash.


Why was the new 1/10 And1 insert made even softer?
Cristo is right; I was talking about the Blue Closed-cell SCT inserts.

daverobbo5 06-09-2011 06:07 AM

dear mr j concepts. i bought a set of groovy's and installed them on brand new B4 front wheels. 1 was good the other was out of round. spinning it on the axle caused vibrations. inever ran the tyres(tires) on the ground. i'll take a short vid and post (pm it) if you like (or maybe not). is this possible? thanks


All times are GMT -7. It is currently 01:28 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.