PW - you going to Trackside for the next round of the SC Showdown?? Curious if you know what tires Chad uses there. Thanks, hope to see you there in mfg's row.

Nick
Viper/TQ

Hi Nick...Jason and I plan on being out there; should be awesome!

Chad runs green Bar Codes.

........

any pics of the punisher for the 22 in mid configuration?

Blue inserts
 

Quick question:

I have a set of new subcultures mounted, rim hex got messed up, I need to pull off the tire. I typically use a paint bucket of acetone to do the job, but wanted to know if that will hurt these blue foames that come with the tires. I have experienced in past where some are fine and some are not.

Thanks!

PW.. any chance of a white Punisher Wing?? Man I want one, but black doesn't go well with my colors :D PLEASE MAKE THEM IN WHITE.

I'm not sure, never tried it.

Unfortunately not; sales on white wings have been very poor in the past. Maybe a white wrap might be pretty cool.

Any chance of Double Dees in orange for 1/10 buggy?

No, sorry.

What do you recomend for hard packed, dry, hot conditions for 2wd buggy?

What is the dust level if any and how hot are you talking?

If it is supper hot (like 85+ degrees), I would recommend the Orange Barcodes, if the temp is anything lower than that try the Blue Bar Codes.

Hope that helps.

Very little if any dust. I would say 90+ degrees. What about fronts?

I would start with Blue Bar-Codes early and then switch to Orange as the temp rises. If the track is fairly smooth you might want to use 2-stage foam or the blue closed-cell foam.

Will the V2 Barcodes be produces in the Orange compounds?