136LikesTLR 22T 4.0 Race Kit: 1/10 2WD Stadium Truck
04-11-2019, 12:32 PM
#422
Yes, the balls will pop in them just fine. Just make sure the ends are of similar offset as the 22T ones. The front camber and steering links have offsets on them for clearance, and I don't know if the 5.0 ones are the same offset.
04-11-2019, 02:45 PM
#423
The setup of Reno is available on his Facebook page.
04-15-2019, 04:31 PM
#424
Tech Adept
What size motor and brand do you recommend?
One more question.
I have a 22 4.0 buggy. My gear diff it loose in the case. Is there shim (size?) to fit over outdrives?
Thanks for the advice. Much appreciated!
One more question.
I have a 22 4.0 buggy. My gear diff it loose in the case. Is there shim (size?) to fit over outdrives?
Thanks for the advice. Much appreciated!
Last edited by braderb; 04-15-2019 at 06:39 PM.
04-18-2019, 11:13 AM
#426
Tech Adept
Reno Savoya posted one on his Facebook page. I will test it this weekend. He runs the steering and Ackermann arms from the 5.0 Buggy. I tried to mount the 5.0 steering but it didn't work...so I will try only with the 5.0 Ackermann arms. Maybe I will do the "flip the bell crank mod" next time.
04-19-2019, 10:31 PM
#428
Reno Savoya posted one on his Facebook page. I will test it this weekend. He runs the steering and Ackermann arms from the 5.0 Buggy. I tried to mount the 5.0 steering but it didn't work...so I will try only with the 5.0 Ackermann arms. Maybe I will do the "flip the bell crank mod" next time.
Reno was using the 5.0 servo arm. A small modification was necesary : material trimming on the bulkhead .
Have a nice week-end
04-19-2019, 10:49 PM
#429
Tech Adept
I used the 5.0 servo horn, too. I think my servo sits in a more forward position than Reno's, it rubs and binds everywhere. I assume the dremeling on the front bulkhead is the same as if I run the 4.0 steering flipped, did this on my 4.0 Buggy.
Did run the #6 Ackermann yesterday and it was much better, even with the standard steering. The steering feel is much more calm, reminds me of the TLR234007 spindles I used to run on my Buggy .
Did run the #6 Ackermann yesterday and it was much better, even with the standard steering. The steering feel is much more calm, reminds me of the TLR234007 spindles I used to run on my Buggy .
06-26-2019, 09:01 PM
#430
Tech Apprentice
iTrader: (5)
Just picked up a used 22t 4.0.
Any of you use velcro instead of the standard body clips?
I might make a velcro bar for the front end and put it on thingiverse...
Is the Frank Root setup is the go to for clay?
I want to make sure im setup well before I commit to a certain driving style. I am pretty stoked that he comments here, you don’t see the product managers at AE commenting on their threads... that I know of.
Any of you use velcro instead of the standard body clips?
I might make a velcro bar for the front end and put it on thingiverse...
Is the Frank Root setup is the go to for clay?
I want to make sure im setup well before I commit to a certain driving style. I am pretty stoked that he comments here, you don’t see the product managers at AE commenting on their threads... that I know of.
06-26-2019, 11:03 PM
#431
Tech Initiate
06-27-2019, 11:23 AM
#432
Just picked up a used 22t 4.0.
Any of you use velcro instead of the standard body clips?
I might make a velcro bar for the front end and put it on thingiverse...
Is the Frank Root setup is the go to for clay?
I want to make sure im setup well before I commit to a certain driving style. I am pretty stoked that he comments here, you don’t see the product managers at AE commenting on their threads... that I know of.
Any of you use velcro instead of the standard body clips?
I might make a velcro bar for the front end and put it on thingiverse...
Is the Frank Root setup is the go to for clay?
I want to make sure im setup well before I commit to a certain driving style. I am pretty stoked that he comments here, you don’t see the product managers at AE commenting on their threads... that I know of.
As for the go-to setup, I think that really depends on who you ask. I haven't run a ton of truck lately, so I don't have anything new to send out myself.
Team Losi Racing
07-19-2019, 04:07 PM
#433
For the body velcro, I wouldn't expect that to hold. I would suggest body clips for sure.
As for the go-to setup, I think that really depends on who you ask. I haven't run a ton of truck lately, so I don't have anything new to send out myself.
We sell some shims. Make sure there is some side to side play. If there isn't any... your tranny is bound up.
Team Losi Racing
As for the go-to setup, I think that really depends on who you ask. I haven't run a ton of truck lately, so I don't have anything new to send out myself.
We sell some shims. Make sure there is some side to side play. If there isn't any... your tranny is bound up.
Team Losi Racing
07-20-2019, 12:17 AM
#435
good. Just picked one up to go with my 22 5.0 ac which I’m finally very happy with. Working with the guys from Vision racing to try and get the 5.0 rack to fit. Once that’s done, it will be awesome. It’s already good now just going to try using the Ackerman arms from the 5.0 to calm it down. We run on a very tight indoor high bite grey ozite carpet track. Going to AE v2 Orange/37.5 front, AE v2 yellow rear 32.5 felt great.
Last edited by jpcopeland1; 07-20-2019 at 06:12 PM.