Grande Prairie Model Racers Association
Tech Elite
iTrader: (4)
Which downpipes were you recommending then Ryan?
Bro they dont run Av Gas,they run Alcohol.Thats why ur eyes burnin LOL and why Our eyes burn from our lil trucks is the Nitro Bro...........dam that nitro smells sweet huh?????
Last edited by wojo1964; 11-08-2008 at 08:52 PM.
Tech Elite
iTrader: (4)
This is a video of a Karz Calgary race laast week.
http://www.youtube.com/watch?v=ZkbfiqPpaCk
They use plastic downspout velcro'd to the floor. Trying to find out how exactly they velcro it.
http://www.youtube.com/watch?v=ZkbfiqPpaCk
They use plastic downspout velcro'd to the floor. Trying to find out how exactly they velcro it.
Tech Elite
iTrader: (4)
Found out how they attach the velcro.
They use 3 to 4 patches of velcro 4 inches a piece along an 8 foot piece of downspout. Holds better than we might think apparently.
Only question is how well it would hold onto our old carpet.
They use 3 to 4 patches of velcro 4 inches a piece along an 8 foot piece of downspout. Holds better than we might think apparently.
Only question is how well it would hold onto our old carpet.
Tech Elite
iTrader: (1)
This is just a reminder to all those who are wanting to run on the ice.. the next race is on the 22nd of this month so this week coming.. i will be there and oh yes my truck will be running! I wont be let down 2 times in a row! So if anyone who wants to be running please get ahold of me either on here or at Wonderland and let me know so i know how many tickets to be getting in. This will be round 2 of the 8 man free for all we are going to have a couple of other trucks on hand just in case but please get your stuff running prior to the race so we can have a massive scene for all to see.
Jay.
Jay.
Tech Elite
iTrader: (4)
I won't be racing this time, but if anyone needs a pitguy just holler.
Hey Just got back from the Rodeo in Edmonton. What fun that was
Tech Adept
iTrader: (6)
ICE ?
Ok Jay been away from the forum and racing for awhile What is happening on the ICE It is on a Saturday so way have to show up.I while look back some on the forum to see what I can find also.
Dennis
Looked back a few pages and found lot's of Revo verses the Savage
Dennis
Looked back a few pages and found lot's of Revo verses the Savage
Last edited by Dennis P; 11-09-2008 at 09:53 PM.
Tech Fanatic
iTrader: (4)
I'm braking in 2 engines, a small block and big block wahat are the temperatures I should run them at ?>
I idle 1 tank through the P 7 and it was verrrrryyyyyy tight It took me a good 2 hours to get it started. ( I did it inside my carpentry shop because is heated and yes by the time I was done I was crying from all the fumes, next time I'm doing it with my swimming gargles on) how many tanks should I run and can I run cheaper 20% to start?
I idle 1 tank through the P 7 and it was verrrrryyyyyy tight It took me a good 2 hours to get it started. ( I did it inside my carpentry shop because is heated and yes by the time I was done I was crying from all the fumes, next time I'm doing it with my swimming gargles on) how many tanks should I run and can I run cheaper 20% to start?
Tech Elite
iTrader: (4)
Hey Randy
Check out post 3270 on the buy/sell thread. Very good truggy and the price is more than fair also.
Check out post 3270 on the buy/sell thread. Very good truggy and the price is more than fair also.
Tech Elite
iTrader: (1)
Dennis!! Yes it has been a long time there buddy, right now the indoor racing wont be for a bit yet but we got ourselfs into ice racing. Mainly what it is, is that we run on the ice at the Canada Games Arena during the GP Storm hockey games. We came up with a couple of different races that we pull off and were trying to put together round 2 of a 8 truck figure 8 race where on the start of the first period intermission we get on the ice and complete a full figure 8 and the first person to the center puck drop and stops wins! BUT tagging other trucks is not only optional its in the rules.. so there has been and will be damage. Its a lot of fun.
Tech Elite
iTrader: (1)
I'm braking in 2 engines, a small block and big block wahat are the temperatures I should run them at ?>
I idle 1 tank through the P 7 and it was verrrrryyyyyy tight It took me a good 2 hours to get it started. ( I did it inside my carpentry shop because is heated and yes by the time I was done I was crying from all the fumes, next time I'm doing it with my swimming gargles on) how many tanks should I run and can I run cheaper 20% to start?
I idle 1 tank through the P 7 and it was verrrrryyyyyy tight It took me a good 2 hours to get it started. ( I did it inside my carpentry shop because is heated and yes by the time I was done I was crying from all the fumes, next time I'm doing it with my swimming gargles on) how many tanks should I run and can I run cheaper 20% to start?
Told you it was going to be tight! Yes you can run the 20% to break tham in and in most manuals it will say to use 20% to break them in which is good, and for the P7R it takes at least half gallon to break them in and the OS almost the same then they will begin to pour on power as long as you have them tuned right.
Tech Elite
iTrader: (1)
I agree with Greg that does sound like a very good deal on that truggy it handles well.
Tech Fanatic
iTrader: (4)
Ok someone please tell me how to get to post 3270
Tech Master
iTrader: (20)