Buy / Sell
#5776
Tech Master
iTrader: (13)
I'm looking for a Spektrum DSM module for my 3PK radio. Similar to this: http://www.amainhobbies.com/product_...taba-3PK-Hitec
PM me if you have one. Thanks
PM me if you have one. Thanks
#5777
Tech Elite
iTrader: (4)
I'm looking for a Spektrum DSM module for my 3PK radio. Similar to this: http://www.amainhobbies.com/product_...taba-3PK-Hitec
PM me if you have one. Thanks
PM me if you have one. Thanks
#5779
ko drop down, 48p pinion set. dish wheels. soldering gun
new ko drop down wheel that will fit ex1 and ex10 - $35
a set of NEW rpm 48 pitch pinion gears 15t-28t missing 26t (total 13 new pinions) in black rpm case - $40
2 packs of yellow sweep dish wheels - $12
weller 140w/100w soldering gun with new tip (tip not in pic but will included) - $40
http://vancouver.en.craigslist.ca/va...406376696.html
a set of NEW rpm 48 pitch pinion gears 15t-28t missing 26t (total 13 new pinions) in black rpm case - $40
2 packs of yellow sweep dish wheels - $12
weller 140w/100w soldering gun with new tip (tip not in pic but will included) - $40
http://vancouver.en.craigslist.ca/va...406376696.html
#5780
Tekin RS + HotWire + Redline 17.5
SOLD
Last edited by rc_square24; 05-29-2011 at 02:59 AM.
#5781
Well, it's starting to warm up a bit, and people are thinking about the next offroad season. I spent a lot of money last year getting myself set up with a truggy, but I just dont see myself using it enough to justify having it, so I've reluctantly decided to sell.
I'll have to let the pictures do most of the talking because the list of parts is so long. Basically you're getting EVERYTHING you need except fuel and a radio. Here's a quick rundown:
-L8T 2.0 race roller version (with tuned flex chassis, upgraded shock towers, etc)
-Losi 350 motor with less than a gallon through it. Properly broken in, comes with the turbo head and the regular head
-Losi RE11 pipe
-Hitec 7955TG steering servo brand new
-Hitec 645MG throttle servo brand new
-Losi starter box with brand new motors, a bunch of spare wheels AND LIPO BATTERIES!
-Kingheads hinge pin braces
-Kingheads quickchange 2 piece motor mount with chassis stiffener
-DE racing rear arm guards
-DE racing chassis skidplates
-2 sets of wheels/tires, one is still good for practice (Proline m3 crimefighters), the other is like new with only about 10 mins runtime (Proline m2 calibers)
-Spare arms, springs, shock parts, clutch, etc etc etc etc
-Complete Losi screw kit
I took out the engine at the end of last season, cleaned and oiled it, and it's ready to go. As you can see, it comes with oils, spare plugs, glow ignitor, rx battery, literally all you need is a jug of fuel and a radio. The truggy may have some other hopups too, I got it from a pretty prominent racer who spends a LOT of money on his gear.
Slotcars not included. (I had nowhere else to lay all this stuff out)
Pics here: http://calgaryrc.com/viewtopic.php?f=9&t=11560
I'll have to let the pictures do most of the talking because the list of parts is so long. Basically you're getting EVERYTHING you need except fuel and a radio. Here's a quick rundown:
-L8T 2.0 race roller version (with tuned flex chassis, upgraded shock towers, etc)
-Losi 350 motor with less than a gallon through it. Properly broken in, comes with the turbo head and the regular head
-Losi RE11 pipe
-Hitec 7955TG steering servo brand new
-Hitec 645MG throttle servo brand new
-Losi starter box with brand new motors, a bunch of spare wheels AND LIPO BATTERIES!
-Kingheads hinge pin braces
-Kingheads quickchange 2 piece motor mount with chassis stiffener
-DE racing rear arm guards
-DE racing chassis skidplates
-2 sets of wheels/tires, one is still good for practice (Proline m3 crimefighters), the other is like new with only about 10 mins runtime (Proline m2 calibers)
-Spare arms, springs, shock parts, clutch, etc etc etc etc
-Complete Losi screw kit
I took out the engine at the end of last season, cleaned and oiled it, and it's ready to go. As you can see, it comes with oils, spare plugs, glow ignitor, rx battery, literally all you need is a jug of fuel and a radio. The truggy may have some other hopups too, I got it from a pretty prominent racer who spends a LOT of money on his gear.
Slotcars not included. (I had nowhere else to lay all this stuff out)
Pics here: http://calgaryrc.com/viewtopic.php?f=9&t=11560
PRICE DROP $700 -> $550 Need the cash now..
#5782
Tech Regular
iTrader: (49)
ARTR B44 needs your receiver and radio
For Sale : B44 with lipo trays and Track power saddle pack
-Airtronics mg servo
-Hobbywing esc and 4300 kva motor
-nearly new condition, always used undertray
-good body and usable tires
-located in Hamilton
-$300.
-send email address for pics
-Airtronics mg servo
-Hobbywing esc and 4300 kva motor
-nearly new condition, always used undertray
-good body and usable tires
-located in Hamilton
-$300.
-send email address for pics
#5784
Tech Initiate
Perry you got PM.
#5785
Tech Initiate
looking to purchase a near new novak 550 with esc.
#5786
Tech Apprentice
Look at buying a new one from Stormer Racing Hobbies ($115). Even with shipping (they are very reasonable), it will be cheaper than most lhs.
https://www.ssl-stormerhobbies.com/c...=ns&pn=NOV3505
https://www.ssl-stormerhobbies.com/c...=ns&pn=NOV3505
#5787
Tech Initiate
thanks for the link just checked it out. decided to go with the 550 4.5t with the esc so i can swap my whole set up and keep the components the same. hopefully i get itb4 the next club race so i can get a little practice in... definetly need it!
#5788
hudy setup system for 1/10 onroad
good condition hudy setup system for 1/10 onraod touring both gas and electric- $115
locate in vancouver area
locate in vancouver area
#5789
Trinity 4X4 SC 550 5.5T Brand New in the box, never used. Never even soldered. SOLD sorry Mike.
ThunderPower Z3R 21.5T Also Brand New in the box! Never used, never soldered . $60
Prefer local Calgary sale
ThunderPower Z3R 21.5T Also Brand New in the box! Never used, never soldered . $60
Prefer local Calgary sale
Last edited by Timbulb; 06-01-2011 at 07:13 PM.