79LikesBuy / Sell
08-16-2010, 04:33 PM
#5026
Like the title says, I want to buy a motorbike so all my nitro stuff has to go!
#1: Xray XT8 '009 1/8 scale Truggy
Attachment 626627
-as a roller for Sold
#2: Xray XT8 1/8 scale Truggy
Attachment 626628
-as a roller only for $150
#3: Xray XB8 EC 1/8 scale Buggy
Attachment 626629
- as a roller for $100
- or as an RTR complete with starter box for $425
includes 2 JR9100S servo's, Jammin JP2 pipe, Trinity "Drake" 21 with over 15 gallons on it (It still starts fine and pulls hard. I'm including this for free), Spectrum DX3.0 transmitter with reciever.
#4: Xray spare parts
Attachment 626630
- I can't just give this stuff away with the cars. There is way too much to list but it does include a complete Xray Active Diff assembly. Anybody who has had to pay retail for Xray parts will realize the value in this. Sold
Shipping is not included but is negotiable.
PM me or call 780 513 6092
Paypal accepted
Kid wrecked my camera. So as soon as I can borrow one I'll post pictures.
#1: Xray XT8 '009 1/8 scale Truggy
Attachment 626627
-as a roller for Sold
#2: Xray XT8 1/8 scale Truggy
Attachment 626628
-as a roller only for $150
#3: Xray XB8 EC 1/8 scale Buggy
Attachment 626629
- as a roller for $100
- or as an RTR complete with starter box for $425
includes 2 JR9100S servo's, Jammin JP2 pipe, Trinity "Drake" 21 with over 15 gallons on it (It still starts fine and pulls hard. I'm including this for free), Spectrum DX3.0 transmitter with reciever.
#4: Xray spare parts
Attachment 626630
- I can't just give this stuff away with the cars. There is way too much to list but it does include a complete Xray Active Diff assembly. Anybody who has had to pay retail for Xray parts will realize the value in this. Sold
Shipping is not included but is negotiable.
PM me or call 780 513 6092
Paypal accepted
Kid wrecked my camera. So as soon as I can borrow one I'll post pictures.
Thanks Savage Canadian
08-16-2010, 09:03 PM
#5028
Tech Master
iTrader: (10)
Ok i am selling a lot of stuff i am no longer needing.
1.Mugen MBX5T ProSpec Roller.This car is awesome i am just going to race buggy for the remaining of season.It has got about 15 races on it. The shocks have recently been rebuilt along with the diffs. The car has the following HopUps.
I will also include a Custom painted body and a set of P-L Revolver M2.
-Light Weight Pillow Balls
-Light Weight Servo Saver
-Aluminum Chassis Braces
-Aluminum rear brace
-Aluminum radio posts
-BCE Chassis
-King Headz Front lower block
-King Headz Rear toe plate
300$+ as a roller
650$ with Roller and ALL PARTS
2.Mugen MBX5T Parts Lot As you can see I got a huge collection of spare parts for the truggy above. I have probally close to 2000$ in just spare parts. Here are the NIP Part numbers
E0814
E0816
E0212
E0582x2
E0816
E0589x2
Pillow Balls
Drive Cups
Chassis
Brake Pads and Disks
E0570
E0802
E0312
E0103
E0132x2
E0407
E0303
E0134
E0109x2
E0813
I also got a lot of parts that are almost like new and you can pretty much see everything in the pics.
400$
3.OS Vspec. This motor has about 5 gallons total but it has just got new front bearing and has been re pinched. Will include a Band new OS P3 plug.
170$
4.Pro-Line truggy tires. I got 2 sets of Pro-Line Truggy Tires remaining. They are White Rims and zero offset. Each set of 4 Tires come with 4 P-L rims.
60$/Set
1.Mugen MBX5T ProSpec Roller.This car is awesome i am just going to race buggy for the remaining of season.It has got about 15 races on it. The shocks have recently been rebuilt along with the diffs. The car has the following HopUps.
I will also include a Custom painted body and a set of P-L Revolver M2.
-Light Weight Pillow Balls
-Light Weight Servo Saver
-Aluminum Chassis Braces
-Aluminum rear brace
-Aluminum radio posts
-BCE Chassis
-King Headz Front lower block
-King Headz Rear toe plate
300$+ as a roller
650$ with Roller and ALL PARTS
2.Mugen MBX5T Parts Lot As you can see I got a huge collection of spare parts for the truggy above. I have probally close to 2000$ in just spare parts. Here are the NIP Part numbers
E0814
E0816
E0212
E0582x2
E0816
E0589x2
Pillow Balls
Drive Cups
Chassis
Brake Pads and Disks
E0570
E0802
E0312
E0103
E0132x2
E0407
E0303
E0134
E0109x2
E0813
I also got a lot of parts that are almost like new and you can pretty much see everything in the pics.
400$
3.OS Vspec. This motor has about 5 gallons total but it has just got new front bearing and has been re pinched. Will include a Band new OS P3 plug.
170$
4.Pro-Line truggy tires. I got 2 sets of Pro-Line Truggy Tires remaining. They are White Rims and zero offset. Each set of 4 Tires come with 4 P-L rims.
60$/Set
08-16-2010, 09:35 PM
#5029
Personal transponders & spektrum rx's
I have 4 pt's for sale
One all ears intact looks brandnew-$85
One no ears-$80
Two cloned ones (made by rclaps.com) work awesome but need to sell as a pair $140 for both including the original AMB that was cloned (leads cut off non working).
I also have 3 spektrum Sr3000 receivers $60 each
And 1 spektrum mini receiver (Sr3001 I think) $70
Thanks
Jason
One all ears intact looks brandnew-$85
One no ears-$80
Two cloned ones (made by rclaps.com) work awesome but need to sell as a pair $140 for both including the original AMB that was cloned (leads cut off non working).
I also have 3 spektrum Sr3000 receivers $60 each
And 1 spektrum mini receiver (Sr3001 I think) $70
Thanks
Jason
Last edited by subman; 08-16-2010 at 10:30 PM. Reason: :)
08-17-2010, 08:32 AM
#5030
Team AE TC3 for sale
Comes with:
chassis:
extreme racing carbon fiber chassis
Tires
Spares
Mustang Body
$125.00
chassis:
extreme racing carbon fiber chassis
Tires
Spares
Mustang Body
$125.00
08-17-2010, 01:42 PM
#5031
Wanted->high torque servo
if anyone has a high torque servo collecting dust, i know a good home for
it........i am looking for one that has a Torque rating of +200 oz./in.
thanks..
it........i am looking for one that has a Torque rating of +200 oz./in.
thanks..
08-17-2010, 08:52 PM
#5032
08-17-2010, 08:55 PM
#5033
-Tamiya TRF416X chassis and alot of spare parts and upgrade parts(over 200 in parts alone). Chassis is lightly scratched from one outdoor club race but other than that the car is in excellent condition and very well maintained.
New Parts list;front belt,2Xc-hub bushings,2x rear uprights, carbon steering knuckles,shock bladders,3x 4 degree carbon c-hubs, short arms front and rear, center pullies,rear sway bar set,1A-1XA seperate suspension blocks, 1D-1XD seperate suspension blocks,46mm steel drive shafts, white ball diff pulley, front spool kit,2x 3 racing diff screws and nuts, 3 racing aluminum steering knuckles, 3 racing spool sleaves and inserts, 3 racing steering assembly, yeah racing 4 degree aluminum steering knuckles, tune-up steel spool cups, front bumper plastic peices, 3 racing pin cushions. Used parts; built diff, one-way,spool kit, various suspension mounting blocks, c-hubs, rear uprights, rear 416 shock tower, etc. I will also include the servo for a quick sale, I need this gone right away. $400.00 for the rolling chassis and parts and servo with a new set of Sweep Racing EXP 30 carpet tires..
-Trinity Nemesis 17.5 brushless motor new $50.00
-Mugen MBX6 rolling chassis. Way too many spares and upgrade parts(well over $300). BCE chassis with only Red Deer RCPro race on it where I finished 4th. Plus an extra new in package BCE chassis, new unpainted body and I can include a new set of Sweep racing wheels and tires. $650.00
-Alot of 8th scale tires new and used-Sweep Racing and Pro-Line. New mounted and un-mounted sets. Alot of 1 qualifier sets and some multiple run sets. Way too many to list. I will get a list together and anyone who is interested in the tires I can amail you what I have. I can also take pics.
-Mugen MBX5T pro-spec truggy. Chassis kit was new at the start of this season and has placed in the A-main at every RCPro race in Alberta this year. Very good setup on it with a few new spares aswell as a parts truggy. Includes 3 used tire sets. $300.00
-RB Shark 9 .21 and RB 2045 pipe set-6 gallons on it and runs very good with alot of power and great fuel mileage. $275.00
-Clockwork JL.21 modded engine with around 2.5-3 gallons through it. $175.00
-JP-3 pipe and header set-hardcoated- $50.00
I will get pics up soon otherwise pm me through rctech.
Thanks...........Dwayne
New Parts list;front belt,2Xc-hub bushings,2x rear uprights, carbon steering knuckles,shock bladders,3x 4 degree carbon c-hubs, short arms front and rear, center pullies,rear sway bar set,1A-1XA seperate suspension blocks, 1D-1XD seperate suspension blocks,46mm steel drive shafts, white ball diff pulley, front spool kit,2x 3 racing diff screws and nuts, 3 racing aluminum steering knuckles, 3 racing spool sleaves and inserts, 3 racing steering assembly, yeah racing 4 degree aluminum steering knuckles, tune-up steel spool cups, front bumper plastic peices, 3 racing pin cushions. Used parts; built diff, one-way,spool kit, various suspension mounting blocks, c-hubs, rear uprights, rear 416 shock tower, etc. I will also include the servo for a quick sale, I need this gone right away. $400.00 for the rolling chassis and parts and servo with a new set of Sweep Racing EXP 30 carpet tires..
-Trinity Nemesis 17.5 brushless motor new $50.00
-Mugen MBX6 rolling chassis. Way too many spares and upgrade parts(well over $300). BCE chassis with only Red Deer RCPro race on it where I finished 4th. Plus an extra new in package BCE chassis, new unpainted body and I can include a new set of Sweep racing wheels and tires. $650.00
-Alot of 8th scale tires new and used-Sweep Racing and Pro-Line. New mounted and un-mounted sets. Alot of 1 qualifier sets and some multiple run sets. Way too many to list. I will get a list together and anyone who is interested in the tires I can amail you what I have. I can also take pics.
-Mugen MBX5T pro-spec truggy. Chassis kit was new at the start of this season and has placed in the A-main at every RCPro race in Alberta this year. Very good setup on it with a few new spares aswell as a parts truggy. Includes 3 used tire sets. $300.00
-RB Shark 9 .21 and RB 2045 pipe set-6 gallons on it and runs very good with alot of power and great fuel mileage. $275.00
-Clockwork JL.21 modded engine with around 2.5-3 gallons through it. $175.00
-JP-3 pipe and header set-hardcoated- $50.00
I will get pics up soon otherwise pm me through rctech.
Thanks...........Dwayne
08-19-2010, 10:59 AM
#5034
Losi Stadium Truck and HPI SCT F/S
Hi Guys:
I have a pristine condition Team Losi MF2 roller 2WD truck with enough spares to build almost a complete 2nd truck. It has 3 bodies, original, 1 new painted, 1 NIP.
$175 + $15 shipping.
I also have a pristine 10 run HPI Blitz roller with lots of STRC hopups, AE slipper/ spur gear setup, Traxxas waterproof receiver box, J Concept body, tires (Goose Bumps), stk body, tires, extra spare parts lots NIP.
$190 + $15 shipping. SOLD!
1- Hobby King 100Amp ESC/ 6.5 motor c/w hand programmer (10 runs, excellent condition).
$90 + $5 shipping
2- excellent condition L&E 2S 5200mah 7.4V 50C lipo batteries. About 5 runs each and always balanced when charged. These are very strong batteries!
$70 each + $5 shipping.
em me at [email protected] for pics.
thanks....
I have a pristine condition Team Losi MF2 roller 2WD truck with enough spares to build almost a complete 2nd truck. It has 3 bodies, original, 1 new painted, 1 NIP.
$175 + $15 shipping.
I also have a pristine 10 run HPI Blitz roller with lots of STRC hopups, AE slipper/ spur gear setup, Traxxas waterproof receiver box, J Concept body, tires (Goose Bumps), stk body, tires, extra spare parts lots NIP.
$190 + $15 shipping. SOLD!
1- Hobby King 100Amp ESC/ 6.5 motor c/w hand programmer (10 runs, excellent condition).
$90 + $5 shipping
2- excellent condition L&E 2S 5200mah 7.4V 50C lipo batteries. About 5 runs each and always balanced when charged. These are very strong batteries!
$70 each + $5 shipping.
em me at [email protected] for pics.
thanks....
Last edited by 7.5man; 08-25-2010 at 06:48 PM. Reason: change add
08-19-2010, 06:29 PM
#5035
stuff to sell: boat hulls, and rb5
These boats are made in KELOWNA BC, ac model boats. Andy does great work!!!
its based on the blast cat 40. Just with a different top on it. I Recomend a jet pro pipe!.
$200
http://www3.telus.net/acboats/cats.html
this is one bad ass boat!
triton racing haul. 100$
im really only wanted to sell this haul. origanally cames with to brushes motors. i took them out and race with a single brushless motor. easy to clean as there is lots of room inside to playwith. the battery holder will hold a 4s lipo.
worked good for me, just moving on for something different. I believe its 32-34inchs
RB5 $300
got TONS OF PARTS FOR IT!!!! all the upgrades possible. new tires and rims, proline and kyosho stub axles.
couple bodies
its based on the blast cat 40. Just with a different top on it. I Recomend a jet pro pipe!.
$200
http://www3.telus.net/acboats/cats.html
this is one bad ass boat!
triton racing haul. 100$
im really only wanted to sell this haul. origanally cames with to brushes motors. i took them out and race with a single brushless motor. easy to clean as there is lots of room inside to playwith. the battery holder will hold a 4s lipo.
worked good for me, just moving on for something different. I believe its 32-34inchs
RB5 $300
got TONS OF PARTS FOR IT!!!! all the upgrades possible. new tires and rims, proline and kyosho stub axles.
couple bodies
08-21-2010, 12:51 PM
#5037
F/S or F/T ----KING MOTOR 23cc BAJA 1:5 scale----
Make me an offer! It's RTR and has 10 tanks on it. 25/1 mix
I'm Looking for a Husquavarna Chainsaw 50cc or slightly lower with head/eye/ear protection, or a 42"+ flat screen TV LCD or Plasma as far as trades go.
http://i185.photobucket.com/albums/x.../1119110-3.jpg
http://s185.photobucket.com/albums/x...V100816001.mp4
I'm Looking for a Husquavarna Chainsaw 50cc or slightly lower with head/eye/ear protection, or a 42"+ flat screen TV LCD or Plasma as far as trades go.
http://i185.photobucket.com/albums/x.../1119110-3.jpg
http://s185.photobucket.com/albums/x...V100816001.mp4
08-21-2010, 01:46 PM
#5038
Tandman, sent you an email on a motor.
08-21-2010, 02:21 PM
#5039
Slash 2wd roller
I have a 2wd slash roller for sale or for trade. Has all most all rpm upgrades you can buy for this truck, big bore traxxas aluminum shocks. Has been well taken care off, new bearings throughout, as well as new tranny case, and spur gear. I can include the stock traxxas servo for a extra $25 bucks. Looking to get about $100 pm me if your interested.
Also comes with a body kinda beat up but still works fine, and the stock tires and rims*
Also comes with a body kinda beat up but still works fine, and the stock tires and rims*
08-23-2010, 10:36 AM
#5040
I have 4 pt's for sale
One all ears intact looks brandnew-$85
One no ears-$80
Two cloned ones (made by rclaps.com) work awesome but need to sell as a pair $140 for both including the original AMB that was cloned (leads cut off non working).
I also have 3 spektrum Sr3000 receivers $60 each
And 1 spektrum mini receiver (Sr3001 I think) $70
Thanks
Jason
One all ears intact looks brandnew-$85
One no ears-$80
Two cloned ones (made by rclaps.com) work awesome but need to sell as a pair $140 for both including the original AMB that was cloned (leads cut off non working).
I also have 3 spektrum Sr3000 receivers $60 each
And 1 spektrum mini receiver (Sr3001 I think) $70
Thanks
Jason
All rx's - $30 each
Thanks
Last edited by subman; 08-26-2010 at 09:29 AM. Reason: Sold