Meakin Park Forum
#16
OHBRAD
Hi Brad, i was just wondering if you could give me the website you mentioned for corally parts please, i like to have a look at it.
Tony
Tony
#18
Track Update
Hi Guys,
Here is some feed back on the track:
a) Track design is complete.
b) Linemarking to start next week ( weather permitting).
c) Drivers stand to be worked on this weekend.
d) Poly pipe installation to happen after line marking is complete.
At best we could be up and going in two (2) weeks and at worst four(4) weeks.
We will keep you updated during the next couple of weeks.
Regards B1
Here is some feed back on the track:
a) Track design is complete.
b) Linemarking to start next week ( weather permitting).
c) Drivers stand to be worked on this weekend.
d) Poly pipe installation to happen after line marking is complete.
At best we could be up and going in two (2) weeks and at worst four(4) weeks.
We will keep you updated during the next couple of weeks.
Regards B1
#19
So the track is going to be marked out with poly pipe only?
#20
Re: Track Update
hI guys,
Just to let you know what was done this weekend.
a) The floor of race control on the drivers stand, had new plates welded to it to strengthen it's structure. New thicker external grade flooring was screwed down in place. New handrail from the top, down to the race control was welded into place. New backbone section and bracing was also welded into place. The stand has been resprayed a more modern grey colour, painting will be finished off tomorrow night.
b) Monday night weather permitting the line marking will commence, this should take around 2 days to complete with all going well.
c) Poly pipe will be pinned down either near the end of the week or next weekend.
d) Plough discs will be fixed to all ends of hairpin turns.
e) Council has approved for a fence to be built accross the front of the off road track, and down to the on road track.
f) Off road to commence racing very soon, on road to commence racing by the earliest 2 weeks by the lates four weeks, weather permitting.
Regards B1
Just to let you know what was done this weekend.
a) The floor of race control on the drivers stand, had new plates welded to it to strengthen it's structure. New thicker external grade flooring was screwed down in place. New handrail from the top, down to the race control was welded into place. New backbone section and bracing was also welded into place. The stand has been resprayed a more modern grey colour, painting will be finished off tomorrow night.
b) Monday night weather permitting the line marking will commence, this should take around 2 days to complete with all going well.
c) Poly pipe will be pinned down either near the end of the week or next weekend.
d) Plough discs will be fixed to all ends of hairpin turns.
e) Council has approved for a fence to be built accross the front of the off road track, and down to the on road track.
f) Off road to commence racing very soon, on road to commence racing by the earliest 2 weeks by the lates four weeks, weather permitting.
Regards B1
#21
Tech Regular
Sounds like you guys have been working very hard well done all!
#22
Track update
Hi guys,
further to the last update:
a) Line marking is now complete, track design complete.
B) Poly pipe to be laid ever before this weekend or this weekend.
c) Plough discs to be laid this weekend
d) Second coat of paint was done tonight to the stand, final painting to be completed tomorrow night
e) Testing of different fixing methods of the polypipe to be decided tomorrow night
All is looking good.
Regards B1
further to the last update:
a) Line marking is now complete, track design complete.
B) Poly pipe to be laid ever before this weekend or this weekend.
c) Plough discs to be laid this weekend
d) Second coat of paint was done tonight to the stand, final painting to be completed tomorrow night
e) Testing of different fixing methods of the polypipe to be decided tomorrow night
All is looking good.
Regards B1
#23
Tech Adept
Yes all is good the track layout looks great.
If all goes well racing wont be far away.
Brad don't forget about that big plough disc for that bend.
If all goes well racing wont be far away.
Brad don't forget about that big plough disc for that bend.
#24
What time will you guys be there Tues nite? Will pop in for a look/ give a hand or something........thanks
#26
So has all the paper work been completed yet or is fair trading still looking at seizing the assets soon.