![Sydney Model Autosports Inc [smaracing.org]](https://www.rctech.net/forum/iconimages/australian-racing/sydney-model-autosports-inc-%5Bsmaracing-org%5D_ltr.gif)
28LikesSydney Model Autosports Inc [smaracing.org]
08-11-2009, 02:54 PM
no racing this weekend, this was announced last month. It's a shame Ray won't be joining us, we could really use the points in mini
I bought a round, you were too busy playing poker to realise 
I bought a round, you were too busy playing poker to realise
08-11-2009, 05:49 PM
Anyone heading down the track 2day while theres some sun 
08-11-2009, 07:01 PM
after burning out a 540 motor with 33-69 gearing ive had to use my 17.5 brushless motor while i try to chase down another silver can, i have it geared at
28-84 and it gives me 5.10 with my transmission ratio of 1.7 tho i also have a 25-75 and it gives me 5.10
what size spur am i ment to be using with that 17.5 motor ?
should i be aiming for a higher spur 108 with a 36 to get the 5.10 ?
what is archived by having a higher spur ?
28-84 and it gives me 5.10 with my transmission ratio of 1.7 tho i also have a 25-75 and it gives me 5.10
what size spur am i ment to be using with that 17.5 motor ?
should i be aiming for a higher spur 108 with a 36 to get the 5.10 ?
what is archived by having a higher spur ?
08-11-2009, 07:17 PM
i think your running an lrp combo from memory
if so you can go to 3.5 3.45 which i was running with temps around the 70c mark
but it is always best to to start a little higher say 3.7/8 and temp cause if the car is not running freely you can do some damage
any tine i change my setting i like to do a 2-3 min run and then check your temps
have fun
if so you can go to 3.5 3.45 which i was running with temps around the 70c mark
but it is always best to to start a little higher say 3.7/8 and temp cause if the car is not running freely you can do some damage
any tine i change my setting i like to do a 2-3 min run and then check your temps
have fun
08-11-2009, 07:36 PM
after burning out a 540 motor with 33-69 gearing ive had to use my 17.5 brushless motor while i try to chase down another silver can, i have it geared at
28-84 and it gives me 5.10 with my transmission ratio of 1.7 tho i also have a 25-75 and it gives me 5.10
what size spur am i ment to be using with that 17.5 motor ?
should i be aiming for a higher spur 108 with a 36 to get the 5.10 ?
what is archived by having a higher spur ?
28-84 and it gives me 5.10 with my transmission ratio of 1.7 tho i also have a 25-75 and it gives me 5.10
what size spur am i ment to be using with that 17.5 motor ?
should i be aiming for a higher spur 108 with a 36 to get the 5.10 ?
what is archived by having a higher spur ?
08-11-2009, 07:37 PM
yer its a lrp combo and the 33-69 i was running in 540 gives me 3.55 would that work with the 17.5 or should i go with a 75-33 and get 3.86 to be on the safe side ill try to chase down a temp gun when payday comes around
08-11-2009, 07:37 PM
Hudson
Dont now if you are able to read this from your hospital bed
But get well soon as you will be missed this weekend
Dont forget to get the nurses to tuck you in well. and i hear the sponge baths can be fun so dont be a man a get up for a shower
Dont now if you are able to read this from your hospital bed
But get well soon as you will be missed this weekend
Dont forget to get the nurses to tuck you in well. and i hear the sponge baths can be fun so dont be a man a get up for a shower
08-11-2009, 07:40 PM
Lol i was trying to remember what you told me to get sunday i went and got a 25-26-28-33
. ill go get the 30-31-32
08-11-2009, 07:45 PM
start with the 3.8 and but you finger on the can after a few mins
if you can hold your finger there for more the a few seconds all should be fine
then if you like go to your 3.55 and do the same
but take it easy there is a big difference in speed from your 540 and 21.5 so hits that where not break bits before will now
if your finding it hard to keep the speed down turn the throttle down on the controller and slowly move back up to 100% This is what i did as Iam in love with my 416
if you can hold your finger there for more the a few seconds all should be fine
then if you like go to your 3.55 and do the same
but take it easy there is a big difference in speed from your 540 and 21.5 so hits that where not break bits before will now
if your finding it hard to keep the speed down turn the throttle down on the controller and slowly move back up to 100% This is what i did as Iam in love with my 416
08-11-2009, 07:47 PM
08-11-2009, 07:55 PM
Cheers guys for the help 
. ill be turning throttle down on the controller i already cracked 1 of front rims sunday :| lol i think ill invest in a cheaper pair of tires come prac nites as $50-60 for a set of 4 id be broke in no time 
i should have a new 540 motor for the next meet and well stay with it abit longer
. ill be turning throttle down on the controller i already cracked 1 of front rims sunday :| lol i think ill invest in a cheaper pair of tires come prac nites as $50-60 for a set of 4 id be broke in no time i should have a new 540 motor for the next meet and well stay with it abit longer
08-11-2009, 08:16 PM
08-11-2009, 08:39 PM
wil there be internet at the track?
08-11-2009, 09:04 PM
08-11-2009, 11:39 PM
would that work with a phone woth wifi?