![Sydney Model Autosports Inc [smaracing.org]](https://www.rctech.net/forum/iconimages/australian-racing/sydney-model-autosports-inc-%5Bsmaracing-org%5D_ltr.gif)
28LikesSydney Model Autosports Inc [smaracing.org]
Missed a big one by nose.
11-03-2008, 09:39 PM
#9488
The sun is out and the clouds are quite high and there is no sign of rain at the airport
http://mirror.bom.gov.au/products/IDR033.loop.shtml
http://mirror.bom.gov.au/products/IDR033.loop.shtml
11-03-2008, 09:50 PM
#9489
Upcoming Rounds
I was having a look at the 4 remaining Sunday rounds and the dates:
ROUND 6 - 9 Nov 08 - This coming Sunday
ROUND 7 - 23 Nov 08 - AARCMCC EP Nationals
ROUND 8 - 13 Dec 08 - 2nd Sunday
Since Nationals and Round 7 fall on the same day will the round be moved to a different Sunday?
Ben
ROUND 6 - 9 Nov 08 - This coming Sunday
ROUND 7 - 23 Nov 08 - AARCMCC EP Nationals
ROUND 8 - 13 Dec 08 - 2nd Sunday
Since Nationals and Round 7 fall on the same day will the round be moved to a different Sunday?
Ben
11-03-2008, 10:27 PM
#9490
I was having a look at the 4 remaining Sunday rounds and the dates:
ROUND 6 - 9 Nov 08 - This coming Sunday
ROUND 7 - 23 Nov 08 - AARCMCC EP Nationals
ROUND 8 - 13 Dec 08 - 2nd Sunday
Since Nationals and Round 7 fall on the same day will the round be moved to a different Sunday?
Ben
ROUND 6 - 9 Nov 08 - This coming Sunday
ROUND 7 - 23 Nov 08 - AARCMCC EP Nationals
ROUND 8 - 13 Dec 08 - 2nd Sunday
Since Nationals and Round 7 fall on the same day will the round be moved to a different Sunday?
Ben
Round 7 will stay as is, but me might squeeze in another round on the 30th.
11-04-2008, 12:43 AM
#9491
Tech Rookie
MTX4 for sale and heaps of spares
MTX4 sale
Lots of new parts too
included is all this and possibly more once I go through the lot of spares
A great car, served me well
Mtx4 with 3mm chasis, chassis done 2 race meets, Kawahara front solid 1-way. titainium center shaft, 2meet old rear bulkhead 2 meet old front and rear lower arms, 2meet old front unis, rear dogbones. 2 meet old bearings throughout the whole car.
all the following are extras
4mm chasis, getting a bit old and scratched
Rear diff completely built
all lower arms spare.
a complete low weight 2 speed with titainium shaft.
about 10 new spurgears.
about 10 pinions mostly used but still good.
full spring sets for shocks, purple, light blu, dark blu, grey, white, red
old rear bulkhead.
one newish 2nd gear housing.
2 rear uprights new
5 front uprights new
1 new rear shock tower
1 new frnt shock tower.
2 new rear belts 2 old rears.
1 new front belt 2 olds.
4 clutch bells that the pinions go on all used but good as.
spare pullies all round
new centre shaft.
2 pair brand new front unis built.
1 pair rear dogbones done4 meets
1 pair rear dogs bit old.
new chasis brace
1 used battery holder carbon fibre.
original 1-way
a bit more there but im getting lazy.
If anyone interestd please PM me and if you want I can send pics of the complete set.
asking $600 open for negotiation depending on the demand
Lots of new parts too
included is all this and possibly more once I go through the lot of spares
A great car, served me well
Mtx4 with 3mm chasis, chassis done 2 race meets, Kawahara front solid 1-way. titainium center shaft, 2meet old rear bulkhead 2 meet old front and rear lower arms, 2meet old front unis, rear dogbones. 2 meet old bearings throughout the whole car.
all the following are extras
4mm chasis, getting a bit old and scratched
Rear diff completely built
all lower arms spare.
a complete low weight 2 speed with titainium shaft.
about 10 new spurgears.
about 10 pinions mostly used but still good.
full spring sets for shocks, purple, light blu, dark blu, grey, white, red
old rear bulkhead.
one newish 2nd gear housing.
2 rear uprights new
5 front uprights new
1 new rear shock tower
1 new frnt shock tower.
2 new rear belts 2 old rears.
1 new front belt 2 olds.
4 clutch bells that the pinions go on all used but good as.
spare pullies all round
new centre shaft.
2 pair brand new front unis built.
1 pair rear dogbones done4 meets
1 pair rear dogs bit old.
new chasis brace
1 used battery holder carbon fibre.
original 1-way
a bit more there but im getting lazy.
If anyone interestd please PM me and if you want I can send pics of the complete set.
asking $600 open for negotiation depending on the demand
11-04-2008, 03:52 AM
#9492
Thanks!
Just wanted to pass on thanks to all the guys there tonight. Had an absolute blast in the novice group and my daughter really enjoyed it as well. She's gone from 4 laps to 8 to 10. At this rate she'll be going past me pretty soon!
However, I won't make the mistake of giving my nephew the good tyres next time
Needless to say, I'll be filling in those new membership forms as soon as they arrive.
However, I won't make the mistake of giving my nephew the good tyres next time
Needless to say, I'll be filling in those new membership forms as soon as they arrive.
11-04-2008, 01:48 PM
#9494
@ $600 for an mtx4 rollerWell I had an absolute shocker last night, but it was good to see another great turn out and I'm a big fan of starting at 7 and getting out of there a bit earlier. It was also great to see superstock so closely contested yet again with 4 people qualifying on 19 laps and a new fastest lap by Troy of 15.3 (still not as fast as my nitro
). Looks like we all have some catching up to do! Cant wait for Sunday, nitro and superstock watch out!
11-04-2008, 02:05 PM
#9495
Thanks Craig.
Starting time was great but pushing the races through quick helped as well.
Just think Craig... if we hadn't decided to take each other out again (why were you so far back AGAIN!) then I would have done 20 laps...
Mayb I shouldn't show up again for the rest of the point score. You seem to have "off" nights when I'm around
Starting time was great but pushing the races through quick helped as well.
Just think Craig... if we hadn't decided to take each other out again (why were you so far back AGAIN!) then I would have done 20 laps...
Mayb I shouldn't show up again for the rest of the point score. You seem to have "off" nights when I'm around