Go Back  R/C Tech Forums > International Forums > Australian Racing
Need some setup help for SERCCC Dandy Buggy >

Need some setup help for SERCCC Dandy Buggy

Community
Wiki Posts
Search

Need some setup help for SERCCC Dandy Buggy

Thread Tools
 
Search this Thread
 
Old 04-12-2004 | 05:29 AM
  #1  
Thread Starter
Tech Initiate
 
Joined: Apr 2004
Posts: 23
From: Melbourne
Default Need some setup help for SERCCC Dandy Buggy

New to Nitro buggies (did run electric onroad) I would appreciate some help in buggy setup...

Currently run an inferno 7.5 with Kanai shocks (blue medium springs) 40wt/35wt F/R oils, anti sway bars with proline knuckle tires -2 degree camber with a little front toe in and 3 degree's toe at the rear. Diff oil is 3/7/1. STock engine. Currently have a 17degree caster and have just ordered 20 degree hub carriers.

Just can't seem to get a good run down the back straight or the front without bouncing all over the god damn place !

Cornering
My first thoughts are the knuckles have too much grip in the corners thus I can nearly flip over.....(I do understand i have brakes!)

Suspension
I just don't know I did start out with really soft springs which was worse than the medium springs I currently run however just can;t seem to get the car sitting well under speed.

Help!
Can you suggest tires, shock preload and shock oils that may work for this track. or any other suggested tuning parameters that may help our inferno
Bad Inferno is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.