Ok Guys for mod, Never ever use a one way with rubber tyres you will be alot slower. Im not 100 percent sure about diff heights i didnt even realise you can do it in the corally,


Also another win for Corally at the summernats, well done ari. Corally finished top 2.

Agreed i would never use a one way in mod anymore.

You can not change the diff heights in the PHI, no need too.

Thanks for the kind words champ. Corally domination all weekend.

Regards

Ari

hahaha no worries ari (world champion) hehe come to the vics so you can race at the world championships at boronia ( NEW TYRES EVERY RUN AHAHAH)

Hi simon,
After watching ARI and ya self win a the summer nats i thought it was time that i traded my trusty old cyclone and get myself a new car after much thought i settled on the PHI , now is there any tips on building this new car or is it pretty much stright forward

Thanks heaps

SHANE

IMO the build is very straight foward, kit setup is also a very good starting point.

the only change to the kit shocks might be the tip that Ari posted earlier

"A tip with the corally shocks a couple of guys have taken out one of the O-Rings (only use one O-Ring) replace the o-ring with a plastic bushing and this makes them smoother again."

I was at the Summernats and the Corally RDX Phi looked to be an incredible car. Obviously, the first thing one sees when looking at the Phi is the unique rear shock position and shock tower, being attached to front of the rear arms. What is the advantage of having them this way?

Corally have used this design for quite a while now and the main aim is for optimized front to rear weight distribution.

My fresh RDX Phi off the work bench , ready for this weekends Club Challenge at Lithgow.

Surely those fruity wires are not Halal?

FACTORY!

Couple of pics from the Summernats.







Thanks to Racing Lines for the pics.

Will be posting my setup soon...

Regards

Ari

are u runing in 19 or stock ?

As promised, heres the link to my '08 Summernats setup, enjoy.

Scroll to the bottom of the page.

http://www.hobbyexpress.com.au/conte...=117&Itemid=53

Regards

Ari

Both!

cool ill get sum tips of u if that ok