![]() |
Originally Posted by zacabrandy
(Post 4280909)
What brand spur gears will fit the E4?
|
Originally Posted by zacabrandy
(Post 4280731)
There'll be 2 more maybe 3 more E4's doing the rounds in Sth East QLD soon. Placed our order, now just waiting for the goodies.
Cheers Aaron |
Originally Posted by ShadowAu
(Post 4260612)
I broke my first drive shaft last weekend... it was in an impact with another car that crashed in front of me so that probably had something to do with it... I am hoping the new 7075 alloy ones don't break
Setup on mine now is still close to stock - 1.3mm front sway bar, moved front top arm to outer hole on the bulkhead... still using the factory springs... this setup calms the steering a little on my track but still gives plenty |
Originally Posted by Marcos.J
(Post 4282191)
the newer drive shafts are pretty good , yo can also use the xray part # 305320 for the T1 car :)
They look meatier and there isn't as much material machined out of the balls around the pins |
Originally Posted by ShadowAu
(Post 4283619)
I've got a set of the new ones to put in and another set sitting at my LHS ready for when I can pick them up
They look meatier and there isn't as much material machined out of the balls around the pins |
Originally Posted by $$$...
(Post 3827036)
I'm seriously thinking about getting one... something a bit different for a change, heck it wouldnt be the first time I've had a 3 belt electric car... just wondering about parts quality and support. Anyone that has run their nitro tourers and buggies care to weigh in???
|
Recieved my E4 today. Openned the box and have to say it looks very well built with a lot of quality. Lets hope it translates to fast lap times.
I'll be running stock mostly, so does anyone have a good set up starting point for an outdoor asphalt track. Mid size with 2 sweepers and a few sharp turns and a teardrop. Cheers Aaron |
Originally Posted by zacabrandy
(Post 4324341)
Recieved my E4 today. Openned the box and have to say it looks very well built with a lot of quality. Lets hope it translates to fast lap times.
I'll be running stock mostly, so does anyone have a good set up starting point for an outdoor asphalt track. Mid size with 2 sweepers and a few sharp turns and a teardrop. Cheers Aaron I'd suggest for a starting setup to use Jake Zarb's from the Team Magic website: http://teammagic.com.tw/Download/E4/...etup(Jake).pdf |
Originally Posted by bender
(Post 4324405)
Aaron,
I'd suggest for a starting setup to use Jake Zarb's from the Team Magic website: http://teammagic.com.tw/Download/E4/...etup(Jake).pdf I've raced at Landsborough with the standard setup and the only change I will make is to use stiffer springs |
1 Attachment(s)
Originally Posted by zacabrandy
(Post 4324341)
Recieved my E4 today. Openned the box and have to say it looks very well built with a lot of quality. Lets hope it translates to fast lap times.
I'll be running stock mostly, so does anyone have a good set up starting point for an outdoor asphalt track. Mid size with 2 sweepers and a few sharp turns and a teardrop. Cheers Aaron the set up will work very well with the stock 1.4 x 7 springs (17lbs) I just used the stiffer AE springs to cut down some of the steering:) ( this car has a ton!!) |
Aaahhhh, so the kits chrome springs a 1.4 - 17lbs. Thanks for that.
Thanks for the set up choices guy's Cheers Aaron |
Originally Posted by zacabrandy
(Post 4327051)
Aaahhhh, so the kits chrome springs a 1.4 - 17lbs. Thanks for that.
Thanks for the set up choices guy's Cheers Aaron |
How do you adjust the lower roll centre settings? ie; kick up/anti dive - anti squat/ pro squat settings.
Also how is the rear toe angle changed? Cheers Aaron |
i have drive both cars that teammagic have made in the e4 and found that the e4rs is a must have the car has unreal steering good rear end grip beaten the top guys race time by 6 sec in stock.i ran it 4 the first time in 540 and took out the summer cup then put it away then took it out agin to go very well in stock.you might find it hard tho to find places on the car to get it up to wieht when running lipo and the car has so much flex so you might have to sort out tweaks in the chassie but i think its a car on the rise to the top.some might say other wise tho
|
New to E4
Hi guys,
i have just subscribed to the site and have read all your posts, i have been recommended the E4 by Team magic, and it appears that the choice is easy after reading your posts... Just about to obtain the first edition E4 not the RS. Was after any tips for building and maintance etc. i've been out for a while of the rc game and have to refresh and learn all about the new big world...so anything would be appreciated. look forward to participating in your conversations/posts. thanks PRIME:) |
| All times are GMT -7. It is currently 02:52 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.