Price check thread
Hi there,
I hope it's OK to post a price check.. That is, to find out what an item is considered worth. Team Associated SC10 roller Started out life as an SC10 RS, but now has: Proline big bore shocks front and rear FT alu hexes on the rear B44 rear hubs (larger outer bearing) New gear diff installed (used old but mechanically excellent outdrives) High torque slipper pads CVA drive shaft setup (as opposed to the original dog bones) Factory team front bulkhead FT blue titanium turn buckles RPM front bumper + chassis brace RPM ball cups Stock servo (yes, not an addition, but I figured I should mention it's included) http://i225.photobucket.com/albums/d...ps1009adb3.jpg http://i225.photobucket.com/albums/d...psc251eb90.jpg http://i225.photobucket.com/albums/d...ps0d7c6f88.jpg http://i225.photobucket.com/albums/d...ps300bf641.jpg Thanks :) |
I don't think what it's worth is really a factor on here. It's more "is it a bargain?"
|
Its worth only what someone is willing to pay..
Stick it on eBay, $0.99 starting bid, and whatever the auction finished for is what its worth.. |
Probably around $100-125 USD
|
Really is hard to say, what may be a good price for one may be too high for another, and it can change from day to day.
Late Jan / Early Feb is always slow on the FS boards, Credit Card statements from the Xmas season are starting to filter through, a bit of bill shock happens and people tighten up the purse strings. Happens every year. |
Originally Posted by wever75
(Post 12944508)
Probably around $100-125 USD
Originally Posted by nexxus
(Post 12944956)
Really is hard to say, what may be a good price for one may be too high for another, and it can change from day to day.
Late Jan / Early Feb is always slow on the FS boards, Credit Card statements from the Xmas season are starting to filter through, a bit of bill shock happens and people tighten up the purse strings. Happens every year. In response to wever - cheers, thats around what I got for it. In response to nexxus - Yeah, it does seem that way. I noticed the for sale boards turn very slow by mid december and hasn't yet picked up. I ended up selling it to a local mate for a price I was content with and a good deal for him. Advantage for him is knowing that I spent a good many hours tidying it right up. It's literally ready for elecs then the track. :) Feel free to close this mate.. Thank you very much for allowing me to pose the question here, even though I didn't get much in the way of $ estimations. It helped regardless. :) On that note.. another forum I an on has a specific section for 'price checks' and it works very very well. It would be even better here as members are not encouraged to leave the price that items have sold for in the original listing. Something that would make working out item values much easier.. bit of food for thought anyway. :) (even a stickied thread would work well) Thanks again. |
Ok let's trial this, We'll make this a price check thread where people who have something can guage a rough estimate of it's worth if they wish to, that way they can use that information if they wish to sell or may choose not to. I will put this thread as a sticky now, and keep an eye on it, it may help some people, but if it turns into a nasty thread, I will take it down very quickly.
So ok guys, lets see if we can do this! |
1 Attachment(s)
Well, I have another one.. Hopefully I can get a little advice.
Schumacher MI4 CX. Bare roller with one set of touring or drift wheels (no elecs at all) and an old ordinary body, otherwise as you see it. She's in good condition, if a little dusty. |
Last few have been on a yr or so ago for $200 and gotten very little interest, given the car is another year older, and people are selling T3 2011's-2012 for 130-180 lately I'd say $100 tops.
|
After a rough price on a amb rc timing system with 3 loops big roll of the coax cable decoder box
|
Someone gave one away a couple of weeks back.
|
Originally Posted by Chamelion
(Post 12964503)
Well, I have another one.. Hopefully I can get a little advice.
Schumacher MI4 CX. Bare roller with one set of touring or drift wheels (no elecs at all) and an old ordinary body, otherwise as you see it. She's in good condition, if a little dusty. |
1 Attachment(s)
hi guy's just wondering what these are worth now
Attachment 1166797 |
i think this thread is a waste of time still no reply's
|
sr300
Originally Posted by meakinracer
(Post 13011555)
hi guy's just wondering what these are worth now
Attachment 1166797 as a general rule with second hand stuff thats in decent condition 50% the price of the same thing brand new is about right |
thanks for the reply i have put it up for $25 inc post
|
Originally Posted by meakinracer
(Post 13017138)
i think this thread is a waste of time still no reply's
|
Tekin T8 2000kv truggy motor. Excellent running condition, good physical condition with a few minor imperfections (stone chips).
Is $120 too much to ask? |
Originally Posted by Chamelion
(Post 13028958)
Tekin T8 2000kv truggy motor. Excellent running condition, good physical condition with a few minor imperfections (stone chips).
Is $120 too much to ask? Ok prices on: M11X radio M12 Radio Tamiya VDF Drift Roller Because I have no idea on these ones! |
$100 might be OK.. If I had to choose between settling for lower or keeping it 'just in case' I'd do the latter. Will see how I go, thanks. :)
|
Team associated 18r rtr
1 Attachment(s)
Hey guys just want to get a rough idea what a fair asking price for this thing would be. I know it's only worth what someone's willing to pay but this may help me decide to just shelf it or try sell.
Team associated 18R RTR. Includes battery and charger. Also includes a new skyline clear body and carbon wing and gold wheels. Runs well just not what I'm into. Cheers Boothy |
If it's the old brushed version maybe $50-$70 area, may get more as an auction on Ebay
|
Originally Posted by nexxus
(Post 13039853)
If it's the old brushed version maybe $50-$70 area, may get more as an auction on Ebay
|
Yes just the brushed version.
Thanks for the help guys, much appreciated. |
Originally Posted by Chamelion
(Post 12964503)
Well, I have another one.. Hopefully I can get a little advice.
Schumacher MI4 CX. Bare roller with one set of touring or drift wheels (no elecs at all) and an old ordinary body, otherwise as you see it. She's in good condition, if a little dusty.
Originally Posted by nexxus
(Post 12966286)
Last few have been on a yr or so ago for $200 and gotten very little interest, given the car is another year older, and people are selling T3 2011's-2012 for 130-180 lately I'd say $100 tops.
Originally Posted by wever75
(Post 12980855)
$75 USD
|
Originally Posted by Chamelion
(Post 13044847)
Ended up getting $165 posted for it (so $145-$150 in my pocket) with an old mustang body and some drift wheels.
|
Originally Posted by wever75
(Post 13045731)
I was talking about boothy,82 sorry :D
|
Looking to pass on an AE FT SC10 roller soon with the following hop ups-
Aluminium Front Spindles and rear hubs RPM Front and rear arms Jconcepts Aluminium steering bell cranks STRC Aluminium Battery strap Protek Bearings Proline extended body mounts RPM ball cups Also comes with a decent body, a few sets of barely-worn wheels and tyres as well as 2 complete sets of brand new AKA rims. Has a heap of spares and a brand new gear diff installed. Any ideas on what this would be worth? I bought barely used on the forums last year but can't remember what I paid, maybe $200? |
150-200ish I guess
|
Any thoughts on a kyosho V-One-RRR in almost new condition. Has novarossi .12 only just run in the oiled and stored. Novarossi tuned pipe with JP header. Stacks of spare arms, spindles, belts, new tyres etc. Complete spring set and sway bar kit. Have too many spares to mention
...just wondering ball park figure - cheers |
Originally Posted by BigBangPro
(Post 13050895)
Any thoughts on a kyosho V-One-RRR in almost new condition. Has novarossi .12 only just run in the oiled and stored. Novarossi tuned pipe with JP header. Stacks of spare arms, spindles, belts, new tyres etc. Complete spring set and sway bar kit. Have too many spares to mention
...just wondering ball park figure - cheers |
Originally Posted by BigBangPro
(Post 13050895)
Any thoughts on a kyosho V-One-RRR in almost new condition. Has novarossi .12 only just run in the oiled and stored. Novarossi tuned pipe with JP header. Stacks of spare arms, spindles, belts, new tyres etc. Complete spring set and sway bar kit. Have too many spares to mention
...just wondering ball park figure - cheers |
Originally Posted by WC
(Post 13053633)
Might fetch $250-300 if you can flog it into an area that runs noisy skinny tourers :sweat:
thanks for your replies. May just hang on to it to annoy the new neighbors :sneaky: |
Originally Posted by BigBangPro
(Post 13053674)
:lol:
thanks for your replies. May just hang on to it to annoy the new neighbors :sneaky: given your locale newies would either be aged deaf or super grumpy :flaming: here go fetch yourself SOME FREE FUEL towards your Welcome efforts :sneaky: http://www.rctech.net/forum/australi...aide-only.html |
Brushed losi XXX-SCT in what appears reasonably good condition with a decent stock body? $100-$150?
|
120-150ish certainly more than a Losi Strike!
|
Tamiya SRB Rough Rider (OG not rerer) rear end in restorable condition. I have gear cases, gears, rear arms, driveshafts, wheel mounts, frp chassis and metal plate, motor, rear roll bar, whip antenna, front and rear shocks. Some front end parts. Still have to clean up electronics box. Any ideas ?
|
Wish I could help, but way out of my area of expertise.
HPI Super 5sc flux in excellent condition? $450-$500? |
Originally Posted by Chamelion
(Post 13079261)
Wish I could help, but way out of my area of expertise.
HPI Super 5sc flux in excellent condition? $450-$500? Problem with selling one of these is it's two expensive to freight so you are relying on local buyers. $400-$450 area. |
Yeah, this is true.. fortunately I only paid $430 with a couple of 3s batteries a few months ago, so I'll still be ahead. :)
|
All times are GMT -7. It is currently 04:59 PM. |
Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.