Ask Team Tekin
#316
Tech Fanatic
I didn't get to use the Redline. The sensor wire plug hits the Pod on my REV4. tried several different clock positions with no luck.
#317
whats the diffrence beetween the rs and rs pro? is it just the motor limit?
#318
#319
I have an R1 and can not get it to calibrate to my DX3R!!
I bind it nad all seems well, steering works.
I go into calibration, it setects neutral to start, I then go full throttle and it detects that, and then full brake and it detects that but when I go back to neutral it just flashed the 3 middle lights.... I wnated to use it today but all I got was frustrated...
Any help would be appreaciated....
I bind it nad all seems well, steering works.
I go into calibration, it setects neutral to start, I then go full throttle and it detects that, and then full brake and it detects that but when I go back to neutral it just flashed the 3 middle lights.... I wnated to use it today but all I got was frustrated...
Any help would be appreaciated....
#320
iirc, whenever a tekin speedo flashes three led's like that it's saying that the neutral range is outside of the expected range. try widening your neutral range and see if that helps.
#321
#322
However we never flash the middle 3 leds? Bottom 3 or top three if we do not see nuetral during initialization. We do flash the middle 2 if we are rebooting.
What does it do when you turn it on now? Initialize like normal and respond to throttle/brake correctly?
Tekin Prez
What does it do when you turn it on now? Initialize like normal and respond to throttle/brake correctly?
Tekin Prez
#323
R1 Sensorless ESC
will be using in a 2wd with 6.5, 7.5bl motors
what settings should I use for intitial setup please
have the hotwire to programme it
will be using in a 2wd with 6.5, 7.5bl motors
what settings should I use for intitial setup please
have the hotwire to programme it
#324
#325
#326
Hey,
If i was running the 6.5 I'd start out with my timing around 70, TP 3, NW 10, BS 50, and PC around 80.
For 2wd the 6.5 is a lot of motor for 2wd unless you have gobs of traction. I'd start out with the 7.5 first, same settings.
If i was running the 6.5 I'd start out with my timing around 70, TP 3, NW 10, BS 50, and PC around 80.
For 2wd the 6.5 is a lot of motor for 2wd unless you have gobs of traction. I'd start out with the 7.5 first, same settings.
#327
Cheer's
got gobs of traction, I'm in the UK
#328
#329
I'm happy with those! That's right around where I recomended.
You can play with more timing if you wish, just watch the motor heat.
You can play with more timing if you wish, just watch the motor heat.
#330
-Wayne