Mugen MTX-3
#7876
Tech Master
Originally posted by loosenut
Hey guys...what is a good pipe or best pipe for the mtx3? I've got a rdlogic 1 piece pipe but it's for the ntc3 so the header don't go right....
Gary
Hey guys...what is a good pipe or best pipe for the mtx3? I've got a rdlogic 1 piece pipe but it's for the ntc3 so the header don't go right....
Gary
if you are looking for legal then go for RD logic legal pipe in 2 piece version because you can play with the length of the pipe to fine tune it!
#7877
Tech Fanatic
where can u get the charge pipe at. Also how much is it? Thanks
#7878
Tech Master
Originally posted by loosenut
Is it necessary to change out teh pulleys to aluminum??? Or is that just bling?? Hehe..
G
Is it necessary to change out teh pulleys to aluminum??? Or is that just bling?? Hehe..
G
#7879
Tech Master
Originally posted by mtx3racer
where can u get the charge pipe at. Also how much is it? Thanks
where can u get the charge pipe at. Also how much is it? Thanks
#7880
Originally posted by Ah10
I would stay away from aluminum pulleys, because they do wear too, and when it does happen it will become sharp and it will cut your belts
I would stay away from aluminum pulleys, because they do wear too, and when it does happen it will become sharp and it will cut your belts
Mine are as old as my car (5-6 months, raced almost every weekend) and the don't show any wear as of yet.
#7881
Tech Master
Originally posted by stefan
Not the 3Racing pulleys.
Mine are as old as my car (5-6 months, raced almost every weekend) and the don't show any wear as of yet.
Not the 3Racing pulleys.
Mine are as old as my car (5-6 months, raced almost every weekend) and the don't show any wear as of yet.
I think plastic pulley would be easier on belts
#7882
Re: Re: Re: Re: Re: MTX2
Originally posted by ImGoinRCn
I'm not sure of the size track but it's a pretty large track. I think the guy that has it has a real decent set up on it. I don't know the specs but if he'd ever call me back, I can let you know. Thanks again.
I'm not sure of the size track but it's a pretty large track. I think the guy that has it has a real decent set up on it. I don't know the specs but if he'd ever call me back, I can let you know. Thanks again.
I run Square pulleys, I believe, on my MTX2, and they are great. At least a year old, and only one got shot because of an errant rock that got pinned between the chassis and the pulley. A plastic pulley would have been shot to hell if it went through that.
#7883
Tech Adept
Originally posted by stefan
Click, yes he can.
He showed me the part yesterday and it's a pretty smart idea.
I have no clue how he came up with it though, he's usually not like that
Click, yes he can.
He showed me the part yesterday and it's a pretty smart idea.
I have no clue how he came up with it though, he's usually not like that
Everybody's entitled to at least one good idea during their lifetime!!
Any chance of some pics or a description of what he did?
All the best
#7884
Tech Fanatic
Sorry for all these questions. My first mtx3...
Do you guys true run smaller diameter tires up front on the mtx3? So that the car pulls more than pushes??
BTW, mtx3 looks siiick!! Much better than my ntc3.....now I'll have to drive it first to determine the performance differences....but the craftsmanship on the car is just insane.
The manual is crap! Does anyone know if there's like a "tuning guide" for the mtx-3??
G
Do you guys true run smaller diameter tires up front on the mtx3? So that the car pulls more than pushes??
BTW, mtx3 looks siiick!! Much better than my ntc3.....now I'll have to drive it first to determine the performance differences....but the craftsmanship on the car is just insane.
The manual is crap! Does anyone know if there's like a "tuning guide" for the mtx-3??
G
#7885
re; solid oneway
Cartman,I will post some pics later tonight
Stefan,I just act dumb to make you feel smarter. J/K
simple minds come simple solutions
Stefan,I just act dumb to make you feel smarter. J/K
simple minds come simple solutions
#7886
solid one way pics
What the hell,I figured I would go ahead and do it now. Here are the pics of what I did.
#7887
axle shafts and grub screws
#7888
sorry for the crappy pics,forgot to set camera for quality.
#7889
Hi Guys,
Just want to let you guys know we got more Tobee Craft MTX-3 hop-ups in stock, and also a few new titanium parts from 3 Racing for the MTX3 as well.
Thanks for reading
Steve Wang
Just want to let you guys know we got more Tobee Craft MTX-3 hop-ups in stock, and also a few new titanium parts from 3 Racing for the MTX3 as well.
Thanks for reading
Steve Wang
Last edited by SpeedTech; 09-10-2003 at 05:22 PM.
#7890
Originally posted by smartdriver
sorry for the crappy pics,forgot to set camera for quality.
sorry for the crappy pics,forgot to set camera for quality.
Comes up with ideas like that and then he can't work a simple camera