8LikesYOKOMO Touring Car BD-7
09-18-2014, 11:58 AM
#4561
It is not covered up here on yokomo Japan web site Jorge
http://www.teamyokomo.com/topics/14/...rtc_bd715.html
http://www.teamyokomo.com/topics/14/...rtc_bd715.html
a bit of photoshop magic reveals that this is just a dark pic of a 2014 black edition...
09-18-2014, 03:23 PM
#4562
09-19-2014, 02:14 AM
#4563
Tech Apprentice
I've mode during mid seasson from serpent eryx to bd7 2014 and i am really happy. Car works lots better, more consistent, I've improved a lot my qualifing results. I drive in mid grip asphalt with tracks open and thight.
Ass donny says car gets dialed with only minor changes
The only thing that I miss from the serpent is the servo mount, Serpent's is really great despite removing some flex in the front
Cheers
Ass donny says car gets dialed with only minor changes
The only thing that I miss from the serpent is the servo mount, Serpent's is really great despite removing some flex in the front
Cheers
Now I consider it very very hard to change to BD7
I wonder if I should buy now or wait for 2015 edition though
Will 2015 edition has a lot of changes?
Anybody has any idea?
09-19-2014, 02:38 AM
#4564
Tech Rookie
It sems like Yokomo is very sercet about there cars until they are released.
Unlike some other optimezed campany i know...
Unlike some other optimezed campany i know...
09-19-2014, 12:57 PM
#4566
Does anyone know if the spurholder/pulley are interchangeable between the 13 and the 14 version?
09-19-2014, 03:36 PM
#4568
09-22-2014, 03:22 AM
#4571
Does the Super-precision Bearing Set for BD7-2014, B7-BBP14 (17 pcs) come with the thinner bearings for DCJ's???
Thx for replying!
Thx for replying!
09-22-2014, 05:18 AM
#4572
I am getting a parts order ready and I have most of the spares in my cart and ready to go, but what is the recomendation for ball stud washers(part numbers Please)? I saw shims on amain that range from .5 to 3mm, is that what should be used? or do ball stud washers from AE fit the yoke ball studs?
09-22-2014, 05:49 AM
#4573
Tech Rookie
Looking at the pics off the Super-precision Bearing it doesn't look the dcj bearings is in the set. But I don't know what the 2 small size bearing fit.
Shims i range form 0,5 to 1 mm is good to have since most setup normaly uses these two types off shimes. With that being said the all M3 shimes should fit on Yokomo ball stud.
Shims i range form 0,5 to 1 mm is good to have since most setup normaly uses these two types off shimes. With that being said the all M3 shimes should fit on Yokomo ball stud.
09-25-2014, 08:44 PM
#4574
New compared to the version BD7-2014 Black:
· Main Chassis (Graphite)
· Shock Towers
· All Bulkheads
· Motor Mount
· Anti Rollbar Stoppers
· Battery Holders
· Balance Weights
· Gear Diff Unit
· Aluminum Solid Axle
BD7’s Technological Innovation Continues!
Team Yokomo will compete in the IFMAR World Championship using BD7 2015
The highly-popular Yokomo BD7 2014 has been sweeping the competition racing scene worldwide, proving itself as the ultimate competition touring car.
Many racers have been astonished by the spectacular performance of the BD7 2014, and competition R/C car manufacturers worldwide has been paying close attention to the development of the BD7 platform, recognizing it as a benchmark to which new designs are measured against.
Despite the successes of the BD7 2014, Yokomo will not stand still!
We at Yokomo will constantly continue research and development, as we believe that there is no end to technological advancement. We are proud to say that our continuous effort to innovate has now culminated in the form of the NEW BD7 2015 competition touring car, which we will reveal on September 29th.
In the upcoming IFMAR 1/10th Electric Touring Car On-road World Championships commencing on October 9th, Team Yokomo will aim for victory with the production-model BD7 2015 -- the same car which will be available to the public in a very short time. Stay tuned!
Yukijiro Umino
Chief Designer, Yokomo Touring Car Development Team
· Main Chassis (Graphite)
· Shock Towers
· All Bulkheads
· Motor Mount
· Anti Rollbar Stoppers
· Battery Holders
· Balance Weights
· Gear Diff Unit
· Aluminum Solid Axle
BD7’s Technological Innovation Continues!
Team Yokomo will compete in the IFMAR World Championship using BD7 2015
The highly-popular Yokomo BD7 2014 has been sweeping the competition racing scene worldwide, proving itself as the ultimate competition touring car.
Many racers have been astonished by the spectacular performance of the BD7 2014, and competition R/C car manufacturers worldwide has been paying close attention to the development of the BD7 platform, recognizing it as a benchmark to which new designs are measured against.
Despite the successes of the BD7 2014, Yokomo will not stand still!
We at Yokomo will constantly continue research and development, as we believe that there is no end to technological advancement. We are proud to say that our continuous effort to innovate has now culminated in the form of the NEW BD7 2015 competition touring car, which we will reveal on September 29th.
In the upcoming IFMAR 1/10th Electric Touring Car On-road World Championships commencing on October 9th, Team Yokomo will aim for victory with the production-model BD7 2015 -- the same car which will be available to the public in a very short time. Stay tuned!
Yukijiro Umino
Chief Designer, Yokomo Touring Car Development Team
